Biamp - Apart CM 6T - Plafonski zvučnik
Garantujemo najnižu cenu!
- Ugrinovački Put 10n, Zemun
- Svetogorska 9, Beograd
The APart CM6T 2-way built-in loudspeaker is “the reference loudspeaker”. It can be used as a 16 Ohm or 100 Volt loudspeaker. In 16 Ohm use, you can connect up to 4 loudspeakers in parallel on each channel of a standard 4 Ohm amplifier. For 100 Volt use, the CM6T is equipped with a high-quality 6 watt 100 Volt transformer with several power tappings. The loudspeaker has a 6 ½” woofer, made of special enforced polypropylen. This results in a very low distortion. To complete the sound, a quality 1” tweeter has been integrated. It makes the CM6T very suitable for the distribution of microphone calls and backgroundmusic. The housing is made of high quality ABS. The woofer is made out of special enforced polypropylen, what makes it moisture-proof. The loudspeaker is easy to install, due to its simple, quick mounting system (3 screws which are hidden behind the loudspeaker grill, what gives the loudspeaker a modern and striking design).
Type : 2-way HiFi Pro
Woofer : 6.5" enforced PP, rubber edge
Tweeter : 1" silk dome
Impedance : 16 ohm / 100V
Transfo Power tappings: 1,5 - 3 - 6 Watts
RMS Power 16 Ohm:
AES Rated: 40 Watts
Music - Program: 60 Watts
RMS Power 100V:
AES Rated: 6 Watts
Music - Program: 10 Watts
SPL 1w/1m: 92 dB
Max peak: 105 dB
Frequency range : 60Hz-20kHz
Dispersion:
@ 1 kHz: 180°
@ 4 kHz: 80°
@ 8 kHz: 45°
Dimensions :
Cut out: 183 mm
Outside: 205 mm
Depth: 80 mm
Weight: 1.4 Kg
The APart CM6T 2-way built-in loudspeaker is “the reference loudspeaker”.
It can be used as a 16 Ohm or 100 Volt loudspeaker. In 16 Ohm use, you can connect up to 4 loudspeakers in parallel on each channel of a standard 4 Ohm amplifier. For 100 Volt use, the CM6T is equipped with a high-quality 6 watt 100 Volt transformer with several power tappings.
The loudspeaker has a 6 ½” woofer, made of special enforced polypropylen. This results in a very low distortion. To complete the sound, a quality 1” tweeter has been integrated. It makes the CM6T very suitable for the distribution of microphone calls and backgroundmusic.
The housing is made of high quality ABS. The woofer is made out of special enforced polypropylen, what makes it moisture-proof.
The loudspeaker is easy to install, due to its simple, quick mounting system (3 screws which are hidden behind the loudspeaker grill, what gives the loudspeaker a modern and striking design).
- Type : 2-way HiFi Pro
- Woofer : 6.5" enforced PP, rubber edge
- Tweeter : 1" silk dome
- Impedance : 16 ohm / 100V
- Transfo Power tappings: 1,5 - 3 - 6 Watts
- RMS Power 16 Ohm:
- AES Rated: 40 Watts
- Music - Program: 60 Watts
- RMS Power 100V:
- AES Rated: 6 Watts
- Music - Program: 10 Watts
- SPL 1w/1m: 92 dB
- Max peak: 105 dB
- Frequency range : 60Hz-20kHz
- Dispersion:
- @ 1 kHz: 180°
- @ 4 kHz: 80°
- @ 8 kHz: 45°
- Dimensions :
- Cut out: 183 mm
- Outside: 205 mm
- Depth: 80 mm
- Weight: 1.4 Kg
Vezani artikli
Srodni proizvodi
