left right

Dobrodošli na Player e-shop!


Garancija najnizih cena

pobedićemo svaku konkurentsku cenu!


Rane

SAC 23 Stereo Crossover

Šifra Proizvoda: 3551

Napiši prvi komentar za ovaj proizvod





371 €

Dostupnost:

Uskoro na lageru, proverite mogućnost porudžbine Proverite mogućnost porudžbineMogućnost porudžbineUkoliko je za proizvod naznačeno da će ga biti uskoro lageru, znači da proizvod trenutno nemamo u prodavnici, ali ga je moguće naručiti.
Molimo Vas da proverite detalje u vezi mogućnosti rezervacije ovog proizvoda.

Proveru možete izvršiti putem telefona:
011/33-47-615
011/33-47-442
011/37-39-701
011/37-74-968


ili emailom:
info@player.rs


Prikazana cena je za komad.

Kratak opis

Simple Division. You do the math. Any way you add it up, Rane makes the finest crossovers. There is no simpler or smarter way to triamp your system than with the SAC 23 Stereo Active Crossover. The SAC 23 employs state-variable 4th-order Linkwitz-Riley filter alignments to minimize phase difficulties in the critical crossover region. Simply put, a Linkwitz-Riley crossover exhibits identical phase characteristics on its Low pass and High pass Outputs. This characteristic guarantees in-phase outputs at all frequencies. In-phase outputs are mandatory for proper acoustic summing of common signals from adjacent drivers in the crossover region. An added benefit of this topology is steep 24 dB...

Pogledaj proizvod iz više uglova:


*Istaknute cene su informativnog karaktera.
Pre svake kupovine i poručivanja ovog uređaja, pozovite jednu od Player prodavnica putem navedenih brojeva telefona, kako biste dobili najbolju cenu.

Simple Division. You do the math. Any way you add it up, Rane makes the finest crossovers. There is no simpler or smarter way to triamp your system than with the SAC 23 Stereo Active Crossover.

The SAC 23 employs state-variable 4th-order Linkwitz-Riley filter alignments to minimize phase difficulties in the critical crossover region. Simply put, a Linkwitz-Riley crossover exhibits identical phase characteristics on its Low pass and High pass Outputs. This characteristic guarantees in-phase outputs at all frequencies. In-phase outputs are mandatory for proper acoustic summing of common signals from adjacent drivers in the crossover region. An added benefit of this topology is steep 24 dB per octave rolloff slopes. A slope of this magnitude guarantees drivers designed to produce a specific range of frequencies, and no more, will not be driven past their limits, thereby minimizing distortion and driver fatigue.

The SAC 23 utilizes 31-position precision DC control voltage potentiometers to select the Low/Mid and Mid/High Frequency points. This crossover circuit design assures consistent accuracy from channel-to-channel and unit-to-unit. This is a distinct advantage over continuously variable designs using ganged potentiometers which can yield large variations in channel-to-channel matching.

The Mono Sub Output provides a separate mono sum of the Left and Right Low Outputs. A 100 Hz low pass filter may be activated for this Output. The Sub Output may be used along with the Left and Right Low Outputs.

The Input Level allows decreasing the overall sensitivity of the entire sound system, including the mono subwoofer if one is used. The Low Level, Mid Level, High Level and Mono Sub Output Level controls allow compensation for sensitivity variations in amplifiers and drivers.

The SAC 23 features balanced XLR connectors that when properly connected, can drive long lines without fear of hum or noise.
 
   
DJ
Commercial Audio
Public Address
Home Recording
Pro Audio
Pro Recording
Features  
- Precise Channel Matching with Single Set of Controls.
- 3 -Position Frequency Selector.
- High, Mid, Low and Mono Subwoofer Output Level Controls.
- +4 dBu and Overload Indicators.
- 24 dB/Octave Linkwitz-Riley Filters.
- Separate Mono Subwoofer Output.
- Balanced XLR Connectors.
- Internal AC Power Supply Meets CE Requirements.
Details  
Model SAC 23
Product Type Stereo Crossover
Part Number 109225
Crossover Details
Alignment Linkwitz-Riley
Slope 24 dB per Octave
Range Low/Mid 80 Hz-1 kHz
Range Mid/High 350 Hz-7 kHz
Control Stereo
Tracking 2%
Accuracy 10%
Inputs: Type Active Balanced
Connectors XLR
Impedance 20k
Maximum Level +20
Gain Range Off to +6
Outputs: Type Active Balanced
Connectors XLR
Impedance 100
Maximum Level +20
Gain Range Off to +0
Mono Sub Details
Filter 100 Hz Low Pass
Gain Trim Off to +0
RFI Filters Yes
Infrasonic Filters 15 Hz, 18 dB per octave
Frequency Response 15 Hz-40 kHz
THD+Noise 0.20%
Signal-to-Noise Ratio 84
Indicators Details
+4 dBu +4 dBu
OverLoad 3 dB Before Clip
Power Unit On
Construction All Steel
Weight 5 lb
Shipping Weight 8 lb
Dimensions 1.75”H x 19”W x 5.3”D (1U)
Shipping Size 4.25” x 20.3” x 13.75”

 Scroll To Top