Dobrodošli u Player svet! Prijavi se ili Registracija



Proizvođač: MARTIN JEM ZR44 Hi-Mass
Dostupnost: Na stanju
Šifra Proizvoda: 11142

The Jem ZR44 Hi-Mass™ is a reliable and highly efficient fogger capable of precise fog delivery from subtle to massive.



Length: 687 mm (27.1 in.)

Length with optional drip tray: 752 mm (30.0 in.)

Width: 379 mm (15.0 in.)

Height: 248 mm (9.8 in.)

Height with hanging bracket: 353 mm (13.9 in.)

Weight, dry: 19.0 kg (41.9 lbs.)

Weight, filled: 28.5 kg (62.9 lb.)


Coverage volume: 1200 m3 (42,378 ft3) per minute
Fluid consumption (maximum): 120 ml/minute
Continuous effect outputReady time: 10 minutes


 Control and Programming
Control options: Integrated analog remote control, DMX, optional
digital remote control, master/slave link mode
Control parameters: Continuous or timer-controlled variable output
Fog: Variable outputcontrol, 0-100%
DMX channels: 1
DMX compliance: USITT DMX512-A
RDM compliance: ANSI/ESTA E1.20 RDM


 ConstructionColor: Black, silver
Housing: Steel and aluminum
Fluid reservoir: 9.5 liter drop-in
Hanging bracket: Integrated yoke with safety attachment point
Heat exchanger: 1800 W, thermally protected
Fluid pump: Oscillating piston, high pressure
Fluid management: Fluid out sensing, sealed for transportation
External fluid control: Fluid sensing
Drip tray: Optional, bolt-on tray with reusable collection sponge


Mounting: Standing or hanging
Orientation: Up to +/- 45° from horizontal
Clearance around machine: 100 mm (4 in.)
AC power: Neutrik PowerCon
DMX, link mode in/out: 3- and 5-pin locking XLR
Remote control: 3-pin locking XLR
Firmware: AVR socket
EU ModelAC power: 220-240 V, 50/60 Hz
Main fuse: 10 AT (slow blow), 250 V
Typical power and current: 1890 W, 8.3 A*
US ModelAC power: 100-130 V, 50/60 Hz
Main fuse: 20 AT (slow blow), 125 V
Typical power and current: 1890 W, 14.6 A*
Measurements made at nominal voltage. Allow for a deviation of +/- 10%.


Exterior surface temperature, steady state: 50° C (122° F)
Maximum ambient temperature (Ta max.): 40° C (104° F)
Max. nozzle temperature: 200° C (392° F)
Minimum ambient temperature (Ta min.): 5° C (41° F)


EU model
EU safety: EN 60 335-1+A15, EN 62233
EU EMC: EN 61000-6-3:3
EU immunity: EN 61000-6-1
Australia/NZ (pending): RCM
US model
US safety: UL 998
Canada safety: CSA C22.2 No.104.01
Included ItemsAnalog remote control: P/N 92765038
Fluid reservoir 9.5 l: P/N 34300528
Power input cable, EU, Neutrik powerCON, stripped ends, 2.5 m (8.2 ft.): P/N 11501041
Power input cable, US, Neutrik powerCON, molded NEMA 5-15P, 2.5 m (8.2 ft.): P/N 11501042
JEM™ ZR44 Digital Remote Control: P/N 92765037
JEM™ ZR44 Ducting Kit with 5 m (16.4 ft.) ducting: P/N 92625005
JEM™ ZR44 Drip Tray: P/N 92620011

Nazad na kategoriju Efekt Mašine