left right

Dobrodošli na Player e-shop!


Garancija najnizih cena

pobedićemo svaku konkurentsku cenu!


Focusrite

RedNet 4

Šifra Proizvoda: 80286

Napiši prvi komentar za ovaj proizvod





call

Dostupnost:

Uskoro na lageru, proverite mogućnost porudžbine Proverite mogućnost porudžbineMogućnost porudžbineUkoliko je za proizvod naznačeno da će ga biti uskoro lageru, znači da proizvod trenutno nemamo u prodavnici, ali ga je moguće naručiti.
Molimo Vas da proverite detalje u vezi mogućnosti rezervacije ovog proizvoda.

Proveru možete izvršiti putem telefona:
011/33-47-615
011/33-47-442
011/37-39-701
011/37-74-968


ili emailom:
info@player.rs


Prikazana cena je za komad.

Kratak opis

RedNet 4 adds eight of the latest remote-controlled Focusrite mic preamps / line inputs to your RedNet system through a single Ethernet cable. With two selectable DI’s, RedNet 4 provides an effective range of analogue inputs for your system. The unit includes Focusrite’s world-class precision A-D conversion. Mic/Line/DI selection, gain, phantom power, HPF and metering are also accessible from the front panel. The benefit of remote control microphone pre-amp gain is that you can keep the mic pre close to the source (so the analogue cable run is minimal) while still setting gain stages from the control room.

Pogledaj proizvod iz više uglova:


*Istaknute cene su informativnog karaktera.
Pre svake kupovine i poručivanja ovog uređaja, pozovite jednu od Player prodavnica putem navedenih brojeva telefona, kako biste dobili najbolju cenu.

RedNet 4


Overview

 

RedNet 4 adds eight of the latest remote-controlled Focusrite mic preamps / line inputs to your RedNet system through a single Ethernet cable. With two selectable DI’s, RedNet 4 provides an effective range of analogue inputs for your system. The unit includes Focusrite’s world-class precision A-D conversion. Mic/Line/DI selection, gain, phantom power, HPF and metering are also accessible from the front panel. The benefit of remote control microphone pre-amp gain is that you can keep the mic pre close to the source (so the analogue cable run is minimal) while still setting gain stages from the control room.

 

rednet

 

Key Features And Performance:

Eight high-quality Focusrite 'RedNet' mic preamps
DC-coupled signal path for characteristically open and transparent sound
Selectable line and DI inputs for input flexibility
Dynamic range: 119dB
THD+Noise: <0.001%
Mic input Level up to +16dBu
Max mic input gain: 63dB
JetPLL™ jitter-reduction technology

 

 

What is RedNet

 

RedNet is Focusrite’s flagship range of modular Ethernet-networked audio interfaces that harnesses the power of Audinate’s tried and tested Dante digital audio networking system to bring studio quality sound to any modern audio application. Fundamentally RedNet is an extremely scalable, near zero latency audio distribution system that can be used to expand I/O channel count, interface digital components, and/or bridge between Pro Tools|HD or MADI and the Dante audio network.

 

what is rednet

 

Specifications

 

Microphone Inputs

Gain range

0 dB; 8 to 63 dB in 1 dB steps

Type

Electronically balanced, Zin = 2.4 kohms

Max. input level

+16 ±0.5 dB; min. gain for 0 dBFS, Rs = 150 ohms, pad out

Min. input level

-47 ±0.5 dB; max. gain for 0 dBFS, Rs = 150 ohms, pad out

Frequency response

20 Hz – 55 kHz ±0.1 dB (-3 dB @ 80 kHz, fs = 192 kHz); Rs = 150 ohms

THD+N

< 0.0007% @ -1 dBFS; +15 dBu input, Rs = 150 ohms, 20 Hz – 22 kHz

Noise

EIN -128 dB; 60 dB gain, Rs = 150 ohms, 20 Hz – 22 kHz

Phantom power

48 V, independently switchable per-channel

Signal-to-noise ratio

119 dB ‘A’-weighted; Rs = 150 ohms

Line Inputs

Gain range

-12 to 42 dB in 1 dB steps

Max. input level

+24 ±0.5 dB; min. gain for 0 dBFS

Min. input level

-30 ±0.5 dB; max. gain for 0 dBFS

Frequency response

20 Hz – 20 kHz ±0.1 dB

THD+N

﹤ 0.003% @ -1 dBFS; +23 dBu input, min.gain, 20 Hz – 22 kHz

Signal-to-noise ratio

117 dB ‘A’-weighted

Instrument Inputs (Inputs 1 & 2 only)

Gain range

+14 to 68 dB in 1 dB steps

Max. input level

+10 ±0.5 dB; min. gain for 0 dBFS

Min. input level

-44 ±0.5 dB; max. gain for 0 dBFS, pad out

Frequency response

20 Hz – 20 kHz ±0.1 dB

THD+N

﹤ 0.001% @ -1 dBFS; +9 dBu input, min.gain, 20 Hz – 22 kHz

Signal-to-noise ratio

112 dB ‘A’-weighted

Analogue High-Pass Filters

Selection

Independently switchable per-channel

Frequency/slope

-6 dB @ 65 ±3 Hz, 12 dB/octave

Crosstalk

Input to input

﹤-80 dB (all other channels at 0 dBFS)

Digital Performance

Supported sample rates

44.1 / 48 / 88.2 / 96 / 192 kHz

Clock sources

Internal or from network master device

Power

PSU

Internal, Universal type, consumption 30 VA

Front Panel Indicators

Power

Green

Network connected

Green

Sync lock

Green

Sample rate

Yellow x 5

Channel 1/2 source

Yellow x 3 (mic/line/inst)

Signal level

Green x 8 (-42 dBFS); Yellow x 8 (-6 dBFS); Red x 8 (overload)

Channel select buttons

8

Channel function controls

Input source, HPF, phantom power, Gain encoder

Channel display

Colour OLED; channel number, input source, gain

 Scroll To Top