Dobrodošli u Player svet! Prijavi se ili Registracija



Proizvođač: KV2 AUDIO KPAK2600
Dostupnost: Nema na stanju
Šifra Proizvoda: 80235
Prikazana cena je za komad.

KPAK2600 - K-RIG System Amplifier



KPAK2600 - K-RIG System Amplifier


KPAK2600 - K-RIG System Amplifier


  • Three-way, active control and amplification unit specifically designed for the K-RIG Groundstack loudspeaker system
  • Houses all signal processing and three individual amplifiers
  • Road-rugged enclosure, Baltic birch cabinet with built in cable storage compartment
  • Suspension system
  • Passive heat sink along with two demand-sensitive fans for added reliability




  • 3-way, 2300W Control and Amplification system for use specifically with KT2.0 and KT2.15 speaker cabinets
  • High Frequency, 200W, Class AB, push-pull, low intermodulation amplifier with transformer balanced outputs
  • Mid frequency, 500W, Class AB, high efficiency, switch mode, low intermodulation design amplifier
  • Subwoofer, 1600W, high efficiency, current enhancing, switching amplifier
  • Complete, on board speaker management system including equalization, time alignment, crossover filters, amplifier overdrive protection, harmonics and output level controls
  • AC soft start circuitry with ON/OFF AC breaker switch provides thorough power protection
  • Passive heat dissipation design with demand-sensitive forced cooling back-up system
  • Professional enclosure using exterior-grade Baltic birch with wear resistant polymer coating
  • Removable front cover provides storage of all AC and speaker cables
  • Bass Character- Attack or extension switch alters the low frequency character
  • Includes all speaker cables for a single stack K-RIG system


High Frequency Amplifier Specification


Type Class AB Push-Pull low intermodulation Mosfet design with transformer balanced output
Rated Continuous Power 200W
Distortion <0.05%
Operating Bandwidth 1.4kHz ÷ 20kHz


Mid Frequency Amplifier Specification


Type Class AB, High efficiency, Switch mode, Low intermodulation design
Rated Continuous Power 600W
Distortion <0.05%
Operating Bandwidth 200Hz ÷ 2kHz


Low Frequency Amplifier Specification


Type High efficiency, Low frequency, Current-enhancing switch mode
Rated Continuous Power 1800W
Distortion <0.05%
Operating Bandwidth 20Hz ÷ 200Hz


Signal Input


Input Sensitivity 1V RMS
Input Impedance 20kΩ (balanced)


Speaker Output


Speaker Output Speakon 8pin (Mid/Hi), 4pin (Sub)




Power Connector Neutrik PowerCon®
Operating Voltage 100÷120V@60Hz | 205÷240V@50Hz | 225÷260V@50Hz
Recommended Amperage 20A 115V | 10A 230V | 10A 250V


Physical Dimensions


Height 700mm (27.55")
Width 450mm (17.71")
Depth 290mm (11.41")
Weight 38kg (83.78lbs)





Nazad na kategoriju Hi-Def Sistemi