NAIM NAP 200 DR Pojačalo Snage
*Cena sa popustom može da se ostvari ukoliko se plaća gotovinski, virmanom (preko računa) ili odmah debitnom i kreditnom karticom.
Garantujemo najnižu cenu!
Naim Audio has a special place in British audio, thanks to it's founder and inspirational leader Julian Vereker, a hugely talented mechanical and electronic engineer with a passion for, amongst many things, music. Founded in 1973, Naim has always had a firm philosophy of music first, measurements second - each Naim product is extensively auditioned as part of the product development process to make sure that it delivers clear, emotional music making ability. Naim products are designed to bring the closest facsimile of a live music event into your home listening environment, to give you maximum pleasure from your music collection.
The 70 watts per channel into eight ohms Naim NAP 200 is a formidable stereo power amplifier using an evolved power amplifier circuit design borrowing many of the lessons learned in the development of the range topping NAP500.
The dominant feature inside the alloy casework of the NAP200 is the enormous power supply - a 430 VA toroidal transformer feeds alternating current to the separate bridge rectifiers and 10000 micro farad 50V BHC reservoir capacitors for each power amplifier channel, and a separate transformer winding, rectifier and capacitor are dedicated to a low noise +24V DC power rail for any matching Naim pre-amplifier - the NAC would be an ideal match.
The main amplifier pcb itself has been subject to component layout changes to improve the grounding scheme, which has cleaned the musical reproduction significantly. At the same time, mechanical de-coupling of the PCB from the surround case work has reduced micro-phony in the circuit, so that there is nothing to disturb the sensitive electronics.
Integration of the NAP200 into your hi-fi system could not be simpler - simply connect an IEC mains lead, your loudspeakers using 4mm banana plugs (ideally wired with NAC5 speaker cable) and use a 4 pin DIN to DIN lead to connect your NAC pre-amplifier. The result will be audio bliss.
Analogue Input |
1 x 4-pin DIN |
Input Impedance |
18kΩ |
Gain |
+29dB |
Frequency Response |
-3dB at 3Hz - 50kHz |
Power Outputs |
Naim pre-amplifier |
Minimum Load Impedance |
2Ω |
Speaker Outputs |
L & R, 4mm “banana” sockets |
Power Output |
70W/channel, 8Ω |
Transient |
300VA |
Mains Supply |
100V, 115V, 230V; 50 or 60Hz |
Power Consumption |
11VA |
Dimensions (HxWxD) |
87 x 432 x 314 mm |
Weight |
11.6 kg |
Supplied with |
SNAIC |
Shipping Weight |
14.2kg |