left right

Dobrodošli na Player e-shop!

Garancija najnizih cena

pobedićemo svaku konkurentsku cenu!


Definition Subwoofer

Šifra Proizvoda: 85545

Napiši prvi komentar za ovaj proizvod

4999 €


Uskoro na lageru, proverite mogućnost porudžbine Proverite mogućnost porudžbineMogućnost porudžbineUkoliko je za proizvod naznačeno da će ga biti uskoro lageru, znači da proizvod trenutno nemamo u prodavnici, ali ga je moguće naručiti.
Molimo Vas da proverite detalje u vezi mogućnosti rezervacije ovog proizvoda.

Proveru možete izvršiti putem telefona:

ili emailom:

Prikazana cena je za komad.

Kratak opis

The Definition Subwoofer shares the same purity of purpose and contemporary design that embodies all Definition series loudspeakers. Seamlessly blending power and passion with detail and control, the Definition Subwoofer delivers smooth LF extension with music and thunderous Low Frequency Effects with movies. A design of simplicity and refined power, a 1KW amplifier drives an opposing pair of 300mm (12in) long throw metal-cone drivers in a substantial plywood cabinet. Definition Subwoofer is designed and engineered with Tannoy’s fundamental principles of precision and articulation at its heart.

4999 €

Pogledaj proizvod iz više uglova:

*Istaknute cene su informativnog karaktera.
Pre svake kupovine i poručivanja ovog uređaja, pozovite jednu od Player prodavnica putem navedenih brojeva telefona, kako biste dobili najbolju cenu.

At the heart of the Definition Subwoofer is a cutting edge 1000Watt Class D amplifier with high speed switch mode power supply. Boasting exceptionally low Total Harmonic Distortion (less than 0.05%) this amplifier delivers massive dynamic power to control the twin metal-cone LF drivers. The amplifier module is mated to a powerful Digital Signal Processing (DSP) engine that offers user controls entirely in the digital domain for the most accurate set-up and LF response. A multifunction rotary control device and LCD display are mounted on the front panel for simple user control.

To handle the extreme power, the Definition Subwoofer uses two 300mm (12inch) aluminium cone drivers arranged as an opposing pair and mounted either side of the ply-wood cabinet. After extensive testing aluminium drivers were specified for their true pistonic motion at high levels and good heat transfer properties allowing them to be driven very hard for extended periods of time. The drivers’ dies cast aluminium chassis has been designed to afford maximum driver venting to maximise excursion.

The substantial subwoofer cabinet is finely constructed from Tannoy’s signature birch-ply laminate sourced from cooler, slowing growing regions. Constructed of 25mm thick laminate, the cabinet uses a mix of flat and curved panels to improve rigidity as well as disperse internal reflections and standing waves. Definition Subwoofer offers a flexible suit of connections allowing one or more subs to be connected in the system and compatibility with both phono RCA and balanced XLR signals.

Each Definition Subwoofer is hand finished in a choice of high gloss black or high gloss lacquered real wood veneers to match the Definition loudspeaker range. Each Definition Subwoofer offers heavy duty CNC machined aluminium feet for optimum stability and convenient front mounted rotary controls with LCD display.

Output power

1000 W RMS

Low frequency response (-6 dB)
(Typical in room)

19 Hz


2 x Phono line level, 2 x XLR balanced

Input sensitivity (full power)

0.3 / 0.6 V (switchable) @ 100 Hz

Input impedance

22 k ohm

High-pass outputs

2 x Phono line level
2 x XLR balanced
31- 125 Hz, 2nd or 4th order high-pass

Input filter

31- 125 Hz, 2nd or 4th order-low pass
with LFE provision

Auto mute

After delay or permanently on (switchable)

Driver type

2 x 300 mm (12”) High Excursion
Aluminium cone, side firing
50 mm (2”) voice coil
field stabilised Ferrite Motor System

Enclosure type

Closed box


94 Litre (3.32 cu. ft.)

Dimensions, (H x W x D)
Including feet, grilles & terminals

514 x 562 x 493 mm
(20.24 x 22.13 x 19.41”)


38.5 kg
(84.9 lbs)

Mains voltage

230 V or 115 V (nominal), factory set
50 - 60 Hz

Standby power consumption

< 0.5 W (EUP Compliant)

Additional features

3 x User defined presets
Variable phase control 0- 180 degrees
Parametric Equaliser x 2, -12/ 3 dB Range
31-125 Hz, Q= 2- 14.4

 Scroll To Top