Dobrodošli u Player svet! Prijavi se ili Registracija

BEOGRAD
Svetogorska 9: +381 11 3347 615
+381 11 3347 442
+381 11 3347 883
Sarajevska 68-70: +381 11 2688 067
+381 11 2688 068
+381 11 2688 069
Južni Bulevar 1a: +381 11 4065 432
+381 64 64 70 100
NOVI SAD
Futoški put 1: +381 21 3010 626
+381 21 3010 627
NIŠ
Pantelejska 53: +381 18 4200 878
+381 64 647 0101
BIJELJINA
Njegoševa 16: +387 55 209 104 +387 55 209 987 +387 66 222 070
DAS AUDIO CL-6T

DAS AUDIO CL-6T


Proizvođač: DAS AUDIO CL-6T
Dostupnost: Na stanju
Šifra Proizvoda: 2581
Prikazana cena je za komad.

CL 6T Ceiling Loudspeakers 2-way passive full range ceiling loudspeaker incorporating a 6.5" cone low frequency transducer and a ferrofluid cooled soft dome high frequency unit with integral diffraction ring. The unit is equipped with a multi-tap line transformer. The system’s low frequency driver is mounted on a plastic support with mounting tabs for fixing to ceiling surfaces. The front of the system shall be covered with a perforated metal grille. Two-way full range ceiling speaker 6 in. low frequency driver Coaxial tweeter 70V, 100V distributed systems High efficiency multi-tap transformer The 2-way passive full range ceiling loudspeaker shall incorporate an 6.5 inch cone low frequency transducer and a ferrofluid cooled 1 inch soft dome high frequency unit with integral diffraction ring. The low frequency voice coil shall be 1 inch in diameter. The high frequency voice coil shall be 0.5 inches in diameter.The system specifications of a typical (transformer less) production unit shall be as follows: Average (RMS) power handling shall be 40W. Frequency range shall be of 60 Hz to 20 kHz. On-axis sensitivity (1W / 1m) shall be 90 dB SPL. Coverage angles shall be 100 degrees horizontal and vertical (average of 1/3rd octave bands from 500 to 8 kHz). Nominal impedance shall be 8 ohms.The system’s low frequency driver shall be mounted on a plastic support that houses mounting tabs for fixing to ceiling surfaces. Colour shall be white. The front of the system shall be covered with a perforated metal grille. The system shall incorporate a 15W multi-tap input transformer.The system shall be a D.A.S. CL-6T. SPECIFICATIONS Frequency Range (-10 dB) 60 Hz – 20 kHz Tap Selection 100V 15-10-5-2.5-1.25 Tap Selection 70V 7.5-5-2.5-1.25-0.6 On-Axis Sensitivity 1W/1 m 90 dB SPL Cut Out Diameter 7.76 in. Impedance Line Weight 2.97 lbs


€ 65

CL 6T Ceiling Loudspeakers

2-way passive full range ceiling loudspeaker incorporating a 6.5" cone low frequency transducer and a ferrofluid cooled soft dome high frequency unit with integral diffraction ring. The unit is equipped with a multi-tap line transformer. The system’s low frequency driver is mounted on a plastic support with mounting tabs for fixing to ceiling surfaces. The front of the system shall be covered with a perforated metal grille.

  • Two-way full range ceiling speaker
  • 6 in. low frequency driver
  • Coaxial tweeter
  • 70V, 100V distributed systems
  • High efficiency multi-tap transformer

The 2-way passive full range ceiling loudspeaker shall incorporate an 6.5 inch cone low frequency transducer and a ferrofluid cooled 1 inch soft dome high frequency unit with integral diffraction ring. The low frequency voice coil shall be 1 inch in diameter. The high frequency voice coil shall be 0.5 inches in diameter.

The system specifications of a typical (transformer less) production unit shall be as follows: Average (RMS) power handling shall be 40W. Frequency range shall be of 60 Hz to 20 kHz. On-axis sensitivity (1W / 1m) shall be 90 dB SPL. Coverage angles shall be 100 degrees horizontal and vertical (average of 1/3rd octave bands from 500 to 8 kHz). Nominal impedance shall be 8 ohms.

The system’s low frequency driver shall be mounted on a plastic support that houses mounting tabs for fixing to ceiling surfaces. Colour shall be white. The front of the system shall be covered with a perforated metal grille. The system shall incorporate a 15W multi-tap input transformer.

The system shall be a D.A.S. CL-6T.

SPECIFICATIONS
Frequency Range (-10 dB) 60 Hz – 20 kHz
Tap Selection 100V 15-10-5-2.5-1.25
Tap Selection 70V 7.5-5-2.5-1.25-0.6
On-Axis Sensitivity 1W/1 m 90 dB SPL
Cut Out Diameter 7.76 in.
Impedance Line
Weight 2.97 lbs



Nazad na kategoriju Ugradni Zvučnici / Delovi