Dobrodošli u Player svet! Prijavi se ili Registracija

BEOGRAD
Svetogorska 9: +381 11 3347 615
+381 11 3347 442
+381 11 3347 883
Sarajevska 68-70: +381 11 2688 067
+381 11 2688 068
+381 11 2688 069
Južni Bulevar 1a: +381 11 4065 432
+381 64 64 70 100
NOVI SAD
Futoški put 1: +381 21 3010 626
+381 21 3010 627
NIŠ
Pantelejska 53: +381 18 4200 878
+381 64 647 0101
BIJELJINA
Njegoševa 16: +387 55 209 104 +387 55 209 987 +387 66 222 070
DAS AUDIO CL-8T

DAS AUDIO CL-8T


Proizvođač: DAS AUDIO CL-8T
Dostupnost: Na stanju
Šifra Proizvoda: 1884
Prikazana cena je za komad.

CL 8T Ceiling Loudspeakers 2-way passive full range ceiling loudspeaker that incorporates an 8" cone low frequency transducer and a ferrofluid cooled 1" soft dome high frequency unit with integral diffraction ring. The unit is equipped with a multi-tap line. The system’s low frequency driver is mounted on a plastic support with mounting tabs for fixing to ceiling surfaces. The front of the system shall be covered with a perforated metal grille. Two-way full range ceiling speaker 8 in. low frequency driver Coaxial tweeter 70V, 100V distributed systems High effeciency multi-tap transformer   SPECIFICATIONS Frequency Range (-10 dB) 50 Hz – 20 kHz Tap Selection 100V 30-20-10 Tap Selection 70V 15-10-5 On-Axis Sensitivity 1W/1 m 90 dB SPL Cut Out Diameter 9.52 in. Impedance Line Weight 4.2 lbs   The 2-way passive full range ceiling loudspeaker shall incorporate an 8 inch cone low frequency transducer and a ferrofluid cooled 1 inch soft dome high frequency unit with integral diffraction ring. The low frequency voice coil shall be 1 inch in diameter. The high frequency voice coil shall be 0.5 inches in diameter.The system specifications of a typical (transformer less) production unit shall be as follows: Average (RMS) power handling shall be 60W. Frequency range shall be of 50 Hz to 20 kHz. On-axis sensitivity (1W / 1m) shall be 90 dB SPL. Coverage angles shall be 90 degrees horizontal and vertical (average of 1/3rd octave bands from 500 to 8 kHz). Nominal impedance shall be 8 ohms.The system’s low frequency driver shall be mounted on a plastic support that houses mounting tabs for fixing to ceiling surfaces. Colour shall be white. The front of the system shall be covered with a perforated metal grille. The system shall incorporate a 30W multi-tap input transformer.The system shall be a D.A.S. CL-8T.


€ 79

CL 8T Ceiling Loudspeakers

2-way passive full range ceiling loudspeaker that incorporates an 8" cone low frequency transducer and a ferrofluid cooled 1" soft dome high frequency unit with integral diffraction ring. The unit is equipped with a multi-tap line. The system’s low frequency driver is mounted on a plastic support with mounting tabs for fixing to ceiling surfaces. The front of the system shall be covered with a perforated metal grille.

  • Two-way full range ceiling speaker
  • 8 in. low frequency driver
  • Coaxial tweeter
  • 70V, 100V distributed systems
  • High effeciency multi-tap transformer

 

SPECIFICATIONS
Frequency Range (-10 dB) 50 Hz – 20 kHz
Tap Selection 100V 30-20-10
Tap Selection 70V 15-10-5
On-Axis Sensitivity 1W/1 m 90 dB SPL
Cut Out Diameter 9.52 in.
Impedance Line
Weight 4.2 lbs

 

The 2-way passive full range ceiling loudspeaker shall incorporate an 8 inch cone low frequency transducer and a ferrofluid cooled 1 inch soft dome high frequency unit with integral diffraction ring. The low frequency voice coil shall be 1 inch in diameter. The high frequency voice coil shall be 0.5 inches in diameter.

The system specifications of a typical (transformer less) production unit shall be as follows: Average (RMS) power handling shall be 60W. Frequency range shall be of 50 Hz to 20 kHz. On-axis sensitivity (1W / 1m) shall be 90 dB SPL. Coverage angles shall be 90 degrees horizontal and vertical (average of 1/3rd octave bands from 500 to 8 kHz). Nominal impedance shall be 8 ohms.

The system’s low frequency driver shall be mounted on a plastic support that houses mounting tabs for fixing to ceiling surfaces. Colour shall be white. The front of the system shall be covered with a perforated metal grille. The system shall incorporate a 30W multi-tap input transformer.

The system shall be a D.A.S. CL-8T.



Nazad na kategoriju Ugradni Zvučnici / Delovi