Pozovite: +381 11 3347 442  
+
×

DAS AUDIO CL-8T

Šifra: 1884
Na stanju
9.480,00 rsd.
Prikazana cena je za komad.
Količina
Opcija boje:

CL 8T Ceiling Loudspeakers
2-way passive full range ceiling loudspeaker that incorporates an 8" cone low frequency transducer and a ferrofluid cooled 1" soft dome high frequency unit with integral diffraction ring. The unit is equipped with a multi-tap line. The system’s low frequency driver is mounted on a plastic support with mounting tabs for fixing to ceiling surfaces. The front of the system shall be covered with a perforated metal grille.

Two-way full range ceiling speaker
8 in. low frequency driver
Coaxial tweeter
70V, 100V distributed systems
High effeciency multi-tap transformer

 



SPECIFICATIONS


Frequency Range (-10 dB)
50 Hz – 20 kHz


Tap Selection 100V
30-20-10


Tap Selection 70V
15-10-5


On-Axis Sensitivity 1W/1 m
90 dB SPL


Cut Out Diameter
9.52 in.


Impedance
Line


Weight
4.2 lbs



 






The 2-way passive full range ceiling loudspeaker shall incorporate an 8 inch cone low frequency transducer and a ferrofluid cooled 1 inch soft dome high frequency unit with integral diffraction ring. The low frequency voice coil shall be 1 inch in diameter. The high frequency voice coil shall be 0.5 inches in diameter.The system specifications of a typical (transformer less) production unit shall be as follows: Average (RMS) power handling shall be 60W. Frequency range shall be of 50 Hz to 20 kHz. On-axis sensitivity (1W / 1m) shall be 90 dB SPL. Coverage angles shall be 90 degrees horizontal and vertical (average of 1/3rd octave bands from 500 to 8 kHz). Nominal impedance shall be 8 ohms.The system’s low frequency driver shall be mounted on a plastic support that houses mounting tabs for fixing to ceiling surfaces. Colour shall be white. The front of the system shall be covered with a perforated metal grille. The system shall incorporate a 30W multi-tap input transformer.The system shall be a D.A.S. CL-8T.

CL 8T Ceiling Loudspeakers

2-way passive full range ceiling loudspeaker that incorporates an 8" cone low frequency transducer and a ferrofluid cooled 1" soft dome high frequency unit with integral diffraction ring. The unit is equipped with a multi-tap line. The system’s low frequency driver is mounted on a plastic support with mounting tabs for fixing to ceiling surfaces. The front of the system shall be covered with a perforated metal grille.

  • Two-way full range ceiling speaker
  • 8 in. low frequency driver
  • Coaxial tweeter
  • 70V, 100V distributed systems
  • High effeciency multi-tap transformer

 

SPECIFICATIONS
Frequency Range (-10 dB) 50 Hz – 20 kHz
Tap Selection 100V 30-20-10
Tap Selection 70V 15-10-5
On-Axis Sensitivity 1W/1 m 90 dB SPL
Cut Out Diameter 9.52 in.
Impedance Line
Weight 4.2 lbs

 

The 2-way passive full range ceiling loudspeaker shall incorporate an 8 inch cone low frequency transducer and a ferrofluid cooled 1 inch soft dome high frequency unit with integral diffraction ring. The low frequency voice coil shall be 1 inch in diameter. The high frequency voice coil shall be 0.5 inches in diameter.

The system specifications of a typical (transformer less) production unit shall be as follows: Average (RMS) power handling shall be 60W. Frequency range shall be of 50 Hz to 20 kHz. On-axis sensitivity (1W / 1m) shall be 90 dB SPL. Coverage angles shall be 90 degrees horizontal and vertical (average of 1/3rd octave bands from 500 to 8 kHz). Nominal impedance shall be 8 ohms.

The system’s low frequency driver shall be mounted on a plastic support that houses mounting tabs for fixing to ceiling surfaces. Colour shall be white. The front of the system shall be covered with a perforated metal grille. The system shall incorporate a 30W multi-tap input transformer.

The system shall be a D.A.S. CL-8T.
Ocena:

Vezani artikli


Srodni proizvodi

MARTIN WISMAN MONITOR 4 BLACK

10.200,00 rsd.
Dodaj u korpu

MARTIN WISMAN MONITOR 4 WHITE

10.200,00 rsd.
Dodaj u korpu