Pozovite: +381 11 3347 442  

DPA d:facto FA4018VDPA

Šifra: 11262
Na stanju
113.400,00 rsd.
Iznos rate:
Prikazana cena je za komad.

Ukoliko ┼żelite da platite na rate kreditnom karticom, molimo Vas da izaberete broj rata.

Va┼żi za kreditne kartice logo_banka

Broj rata:

Garantujemo najni┼żu cenu na tr┼żi┼ítu!
U slu─Źaju da pronadjete isti proizvod po povoljnijoj ceni,
molimo Vas da nas kontaktirate na:


The d:factoÔäó Vocal Microphone is engineered especially for vocal performances onstage. It captures electrifying stage performances and accurately replicates a singer's voice transparently, consistently and thrillingly. The mic is optimized for use in sound reinforcement as well as recording applications. It offers natural sound, high separation from distant sound sources and SPL handling up to 160 dB.

The phantom-powered DPA handle has a sleek look and state-of-the-art electronic design. And, if you decide to go wireless, you can just switch to an adapter for wireless at a quarter of the cost of a new microphone. The modular nature of the d:facto™ series allows you to switch both the capsule as well as the adapter. The d:facto™ Supercardioid Capsule features an isolation-optimized supercardioid polar pattern. It is specifically designed to augment the human vocal range. It uses directional characteristic from the best of two worlds – both cardioid and supercardioid patterns. The capsule’s directional pattern and definition gives high separation and true sound color onstage. It is ideal for PA amplification and recording. Frequency response and phase, both on- and off-axis, is linear. You can remove the capsule and replace it with any other d:facto™ or d:dicate™ capsule if your needs change. The mic also features a robust three-stage pop protection grid built into the microphone that removes unwanted noise. Although this version of the d:facto™ Vocal Microphone comes with a d:facto™ Handle for a wired solution, the d:facto™ Vocal Microphone is also the perfect choice to use with your favorite wireless system. Flexible adapter system This gives you flexible, simple and affordable possibilities. With the d:facto™ series, you are no longer bound to one wireless system. As circumstances change, you can just switch your adapter at a quarter of the cost of a new microphone. You won't hear any loss in sound quality. d:facto™ adapters work with all leading wireless mic solutions, such as Lectrosonics, Sennheiser, Shure, Sony and Wisycom. DPA Microphones’ ingenious adapter system is one of a kind in the industry. This modular system protects your investment in fantastic sound for years to come. See all our d:facto™ Adapters for wireless and find an adapter that fits your wireless system. “They just sound great. The d:facto™ Vocal Microphone is genius. Even in a small club I can get it as loud as most dynamic mics without hideous feedback, but the sound quality and 'intelligibility' is still there.” – Phil Jones, Front of House Engineer for Royal Blood Read the full review


Features The product offers the following features Extraordinarily natural sound Perfectly uniform supercardioid directionality High separation Extreme SPL handling: 160 dB Low handling noise Sleek design Flexible adapter system fits most professional wireless systems




Specifications d:facto™ VOCAL MICROPHONE WITH DPA HANDLE FOR WIRED, SUPERCARDIOID Directional pattern Supercardioid Principle of operation Pressure gradient Cartridge type Pre-polarized condenser Frequency range 20 Hz - 20 kHz, permanent third order high pass filter at 80 Hz Frequency range, ±2 dB, at 12 cm (4.7 in) 100 Hz - 16 kHz with 3 dB soft boost at 12 kHz Sensitivity, nominal, ±2 dB at 1 kHz 5 mV/Pa; -46 dB re. 1 V/Pa Equivalent noise level, A-weighted Typ. 19 dB(A) re. 20 µPa (max. 21 dB(A)) S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL) Typ. 75 dB(A) Total harmonic distortion (THD) < 1% up to 139 dB SPL peak Dynamic range Typ. 120 dB Max. SPL, peak before clipping 160 dB Output impedance 100 Ω Minimum load impedance 1 kΩ Cable drive capability 100 m (328 ft) Output balance principle Impedance balancing with Active Drive Common mode rejection ratio (CMRR) > 50 dB at 1 kHz Power supply (for full performance) 48 V Phantom power (± 4 V) Current consumption Max. 2 mA Connector XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase Color Matte black Weight 309 g (10.9 oz) Microphone diameter 52 mm (2.05 in) Capsule diameter 19 mm (0.75 in) Microphone length 205 mm (8.1 in) Maximum output voltage, RMS 8 V Polarity +V at pin 2 for positive sound pressure Temperature range -40°C to 45°C (-40°F to 113°F) Relative humidity (RH) Up to 90%


Vezani artikli

Srodni proizvodi