Third-generation success story: the PowerMate3! The current PowerMate generation features a multitude of innovations and optimizations. Despite a clear reduction in weight, it offers considerable gains in terms of both power amplifier output and features, as well as being more compact than ever before. The PowerMate 1000-3 is supplied with a very robust plastic lid with an integrated handle, a highly innovative solution that offers optimal protection for the device as well as greater carrying comfort.  
 
Dynacord PowerMate 1000-3 features: 

• PowerMate with 2x 1000 watt RMS / 4 Ohm power 
• 6 MIC/LINE inputs, 4 stereo MIC/LINE inputs, 6 AUX-busses 
• 30% reduction in weight, more compact dimensions and >50% less energy consumption compared to the 
• previous models 
• editable effects 
• USB digital audio interface + MIDI 
• innovative transport and protection solution 
• the XLR microphone input is equipped with an extremely high quality, ultra-low noise, discrete 
• preamp. 
• the +48V phantom power for condenser microphones can be switched in groups of six. 
• line input and channel insert are implemented as jack sockets 
• gain can be controlled in the range 0-60 dB. 
• the switchable Lo Cut filter (80Hz, 18dB/oct) serves to eliminate low-frequency noise 
• a very typical DYNACORD feature is the asymmetrical Voicing Filter by means of which, if desired, 
• the voice can be powerfully emphasized in the mix. 
• 3-band semi-parametric equalizer makes it possible even for unpractised users to perform the 
• requisite corrections swiftly and intuitively. 
• possible to mute each input channel individually and/or listen to its pre-fader signal 
• Signal Present and Peak LED for level control 
• channel faders are dust-protected and offer not only excellent crosstalk attenuation but also a 
• practice-optimized control characteristic. 
• all potentiometers and faders are high-quality components from ALPS. 
• 2 of the 4 stereo inputs of each model are additionally equipped with cinch (RCA) sockets switched 
• in parallel for CD or MP3 players. 
• 2 other stereo inputs receive in addition the four channels of the digital audio interface USB 1-2 
• and USB 3-4 
• separate gain controls are provided for the stereo Line and Mic inputs to permit them to be used in 
• parallel if desired. 
• 3-band tone controls are provided and a Balance control replaces the PAN control found in the mono 
• channel strips. 
• 11-band stereo EQ can be routed to the Master channels or else to either or both of the Monitor 
• Sends according to choice. 
• USB 2.0 port serves as a digital audio interface between the PowerMate and a PC or Mac. 
• the PowerMate also offers a fully-featured PC MIDI 
• interface 
• rackmount kit RMK-1000-3 optionally available 
• dimensions (WxHxD): 483 x 135 x 443,7 mm (rack-mount), 510,5 x 164,5 x 571,5 mm (with cover) 
• weight: 12,5 kg, with cover 14 kg