Pozovite: +381 11 3347 442  
+
×

EIGHTEEN SOUND HD2080T 8ohm

Šifra: 6854
Uskoro na stanju

Garantujemo najnižu cenu na tržištu!
U slučaju da pronadjete isti proizvod po povoljnijoj ceni,
molimo Vas da nas kontaktirate na:
bestprice@player.rs

Opcija:

HF Compression Driver
Key features

109 dB SPL 1W / 1m average sensitivity
2 inch exit throat
3 inch edgewound aluminum voice coil
200W program power handling
Polyethilene - Titanium diaphragm assembly
Copper shorting ring on pole pieces

Downloads



 Data sheet


 Drawing






 
Description The HD2080T 2-inch exit high frequency compression driver has been designed for use in high quality installed audio systems, where weight is not the key issue.The motor structure, throughout the precisely coherent phase plug with 3 circumferential slots and copper ring on the pole piece, reduces inductance effects and distortion. Four top plate air ducts have been designed to act as a loading chamber for the diaphragm, implementing mid band distortion and response figures.The HD2080T diaphragm assembly is composed of a titanium dome sandwiched to a proprietary treated polyester suspension unit. It has been designed to maintain low resonance, lowering the minimum crossover point value at 1,2kHz. Thanks to its physical properties, the proprietary treated Nomex former has a 30% higher value of tensile elongation at a working operative temperature (200°C) when compared to Kapton. This feature enables proper energy transfer control from the voice coil to the dome in real working conditions. Moreover, this proprietary former material is also suitable to for use in higher moisture content environments.The HD2080T powerful ceramic magnet assembly has been designed to obtain 16KGauss in the gap.Excellent heat dissipation and thermal exchange are guaranteed by the direct contact between the magnetic structure and the aluminum cover which leads to a lower power compression value.



GENERAL SPECIFICATIONS


Throat Diameter
50 mm (2 in)


Rated Impedance
8 ohm


DC Resistance
6,2 Ohm


Minimum Impedance
8 Ohm at 3500Hz


AES power (1)
100W above 1,2 kHz


Program power (2)
200W above 1,2 kHz


Sensitivity(1W@1m) (3)
109 dB


Frequency Range
500Hz ÷ 20kHz


Recomm. Xover Frequency
above 800Hz (12dB/oct slope)


Diaphragm Material
Titanium - Polyethilene


Voice Coil Diameter
75 mm (3 in)


Voice Coil Winding Material
Edge-wound aluminum


Magnet Material
Ferrite


Flux Density
1,8 T


BL Factor
12,8 N/A


Polarity
Positive voltage on + terminal gives positive pressure in the throat



 



MOUNTING INFORMATIONS


Overall diameter
169 mm (6,65 in)


Mounting holes diameter
4 M6 holes 90° at Ø 102 mm (4 in)


Bolt circle diameter
102 mm (4 in)


Total depth
75,4 mm (3 in)


Net weight
5,3 Kg (11,60 lb)


Shipping weight
5,5 Kg (12,10 lb)


CardBoard Packaging dimensions
170x170x80 mm (6,7x6,7x3,2 in)



 
HD2080T MEASURED WITH 1W INPUT ON RATED IMPEDANCE AT 1M DISTANCE ON XR2064 HORN MOUTH AXISFREE AIR IMPEDANCE MAGNITUDE CURVE
 
 

HF Compression Driver

Key features

  • 109 dB SPL 1W / 1m average sensitivity
  • 2 inch exit throat
  • 3 inch edgewound aluminum voice coil
  • 200W program power handling
  • Polyethilene - Titanium diaphragm assembly
  • Copper shorting ring on pole pieces
Downloads
 Data sheet
 Drawing
HD2080T
 


Description
The HD2080T 2-inch exit high frequency compression driver has been designed for use in high quality installed audio systems, where weight is not the key issue.
The motor structure, throughout the precisely coherent phase plug with 3 circumferential slots and copper ring on the pole piece, reduces inductance effects and distortion. Four top plate air ducts have been designed to act as a loading chamber for the diaphragm, implementing mid band distortion and response figures.
The HD2080T diaphragm assembly is composed of a titanium dome sandwiched to a proprietary treated polyester suspension unit. It has been designed to maintain low resonance, lowering the minimum crossover point value at 1,2kHz.
Thanks to its physical properties, the proprietary treated Nomex former has a 30% higher value of tensile elongation at a working operative temperature (200°C) when compared to Kapton. This feature enables proper energy transfer control from the voice coil to the dome in real working conditions. Moreover, this proprietary former material is also suitable to for use in higher moisture content environments.
The HD2080T powerful ceramic magnet assembly has been designed to obtain 16KGauss in the gap.
Excellent heat dissipation and thermal exchange are guaranteed by the direct contact between the magnetic structure and the aluminum cover which leads to a lower power compression value.

GENERAL SPECIFICATIONS
Throat Diameter 50 mm (2 in)
Rated Impedance 8 ohm
DC Resistance 6,2 Ohm
Minimum Impedance 8 Ohm at 3500Hz
AES power (1) 100W above 1,2 kHz
Program power (2) 200W above 1,2 kHz
Sensitivity(1W@1m) (3) 109 dB
Frequency Range 500Hz ÷ 20kHz
Recomm. Xover Frequency above 800Hz (12dB/oct slope)
Diaphragm Material Titanium - Polyethilene
Voice Coil Diameter 75 mm (3 in)
Voice Coil Winding Material Edge-wound aluminum
Magnet Material Ferrite
Flux Density 1,8 T
BL Factor 12,8 N/A
Polarity Positive voltage on + terminal gives positive pressure in the throat

 

MOUNTING INFORMATIONS
Overall diameter 169 mm (6,65 in)
Mounting holes diameter 4 M6 holes 90° at Ø 102 mm (4 in)
Bolt circle diameter 102 mm (4 in)
Total depth 75,4 mm (3 in)
Net weight 5,3 Kg (11,60 lb)
Shipping weight 5,5 Kg (12,10 lb)
CardBoard Packaging dimensions 170x170x80 mm (6,7x6,7x3,2 in)

 

HD2080T MEASURED WITH 1W INPUT ON RATED IMPEDANCE AT 1M DISTANCE ON XR2064 HORN MOUTH AXIS
HD2080T MEASURED WITH 1W INPUT ON RATED IMPEDANCE AT 1M DISTANCE ON XR2064 HORN MOUTH AXIS

FREE AIR IMPEDANCE MAGNITUDE CURVE
FREE AIR IMPEDANCE MAGNITUDE CURVE

 

 

Ocena:

Vezani artikli


Srodni proizvodi

EIGHTEEN SOUND 12LW800

23.160,00 rsd.
Uskoro na stanju

EIGHTEEN SOUND 12W750

22.440,00 rsd.
Dodaj u korpu

EIGHTEEN SOUND 15W930

23.880,00 rsd.
Dodaj u korpu