ELECTROCOMPANIET ECI 6 Integrated Amplifier
Garantujemo najnižu cenu na tržištu!
U slučaju da pronadjete isti proizvod po povoljnijoj ceni,
molimo Vas da nas kontaktirate na:
Fully balanced integrated amplifier
The new ECI 6 is a powerful integrated amplifier equipped with a 4 analogue inputs. The ECI 6 offers 2 x 125 Watts and is based on the successful ECI 5 MK II. To enhance it, we have equipped the ECI-6 with an even better power supply and a more sophisticated preamplifier module. As a result we can offer you an extremely substantial and dynamic amplifier, capable of controlling a wide range of speakers on the market.
Analogue sources can be connected to one balanced (XLR) input and three single-ended (RCA) stereo inputs. With two preamplifier outputs, one balanced and one single ended, the ECI-6 is ready for future expansions. The input stage is built from discrete circuits running in class A with zero feedback. The output stage runs with moderate amounts of negative feedback, carefully balanced between good bass extension and control, a detailed open midrange and a warm detailed top. All to ensure that the ECI 6 will reproduce your favourite music the way it was recorded.
The ECI 6 is upgradable to ECI 6D and ECI 6DX.
|Input impedance ( Balanced input )||47Kohm|
|Maximum input level||10 Volt RMS|
|Noise floor ( 1Vrms, 20 - 20 kHz, balanced)
|THD + N (1Vrms, 20 - 20 kHz, balanced)||<0.004%|
|Gain (Balanced)||0 dB|
|Output Impedance||< 0,02 Ohm|
|Frequency response||1 – 150 kHz|
|Channel separation||> 120 dB|
|THD ( 20 - 20 kHz)||< 0.004%|
|Maximum peak current||>100A|
|Damping factor 8 ohm load||>350|
|I Input sensitivity 120W output||1.3Vrms|
|Input sensitivity HT 120W output||1Vrms|
|Gain HT Input||x36 (31 dB)|
|Rated output power|
|8 ohms||2 x 125 W|
|4 ohms||2 x 200 W|
|2 ohms||2 x 370 W|
|(no load or signal)|
|Width||465 mm / 18.3 inches|
|Depth||405 mm / 16 inches|
|Height||128 mm / 5 inches|
|Weight||20Kg / 44 lbs.|