Extremely versatile power supply for all kinds of passive RGB LED-projectors.
Different standalone working modes:

Hold mode: Instant access to 9 pre-programmed colors
Static chase mode: 12 different color chases with manual speed control
Sound chase mode: 12 different color chases with audio triggering
Spectrum mix: 32 different spectrum mix colors, including nice color fades


Adjustable speed and dimming with faders
Slow color fades with adjustable fade time
Blackout and “Full on” function
All functions can be controlled directly on the on the LED-Manager or by the optional LEDCON-01 remote.
Several LED-Managers can be used in Master/slave mode to create high power, fully synchronized setups.
300Watt power: 2x 150W 24Vdc outputs. (R+G+B) with short-circuit protections
Built-in Clock with battery backup and NiMH battery charger (batteries not included)
3 independent programmable on/off timers. (start/stop 3 different color chases at 3 different times!)
Can be controlled by any standard DMX controller!
4 DMX channels needed: Ch1=red, Ch2=green, Ch3=Blue, Ch4=Dimmer/strobe.
Enclosure prepared for easy installing against the wall.
Fan cooling for extra reliability.


:: Technical Information
Power Input: AC 230V~ 50Hz Fuse: 6,3A slow blow (20mm glass) Backup batteries: 3x 1,2V AA-type NiMH rechargeable batteries (optional) Output voltage to LEDs: DC 24V common anode Output power to LEDs: 2x 150W max. (Total = 300W max.)

Red: 2x 50W max. (Total = 100W max.)
Green: 2x 50W max. (Total = 100W max.)
Blue: 2x 50W max. (Total = 100W max.)

DMX connections: 3pin XLR (DMX-512 standard) DMX channels: 4 (CH1: red, CH2: green, CH3:blue, CH4:dimmer/strobe) Audio input: None, internal microphone Size: 330 x 202 x 106cm (see drawing below) Weight: 6,6kg