MARANTZ HD DAC1 Black
Garantujemo najnižu cenu na tržištu!
U slučaju da pronadjete isti proizvod po povoljnijoj ceni,
molimo Vas da nas kontaktirate na:
bestprice@player.rs
The Marantz HD-DAC1 is a ultra high quality dedicated headphone amplifier, it creates simply amazing sound because it uses current feedback amplification technologies from Marantz’ high end Premium 11 series. Headphones have always added extra intensity to music. Now, with the Marantz HD-DAC1 that intensity reaches new climactic heights.
HD-DAC1 is so powerful, it can even drive audiophile high impedance headphones of up to 600 ohm with complete MODE ease. All thanks to its three level gain control, Marantz HDAM modules, a high current audiophile DAC (CS4398), and its Premium Quality fixed and variable RCA outputs. It is so powerful, it not only drives headphones, you can also directly connect it to your Hi-Fi integrated amplifier or to a pair of active speakers or power amps. It is also highly connectable with optical and coaxial digital inputs as well as a USB-B port enable you to stream music directly from your PC or MAC.
iDevices can also be connected via the USB port on the front. For even more connectivity there is also included an analogue input. The USB-B works in asynchronous mode to support not only 192 kHz / 24bits high-resolution audio but also the DSD 2.8MHz and 5.6MHz for maximized performance and the most direct way to enjoy excellent quality. To safeguard quality when connected to a computer, we built extended isolation around the USB-B input to eliminate the chance of high frequency noise generated by the computer entering the HD-DAC1. Marantz have even included a jitter remover and Dual Clock for extreme accuracy.
Without doubt this unit is a feast for the ears, it also looks good. Information on the current volume, input, resolution and more is shown on the stylish Marantz porthole display. HD-DAC1 has an unmistakable Marantz family resemblance, the solid aluminium front is supported by a double layer bottom plate and retro-style wooden side panels prove pure craftsmanship.
- High quality Headphone amplifier with DAC Mode
- 2x optical, coaxial and USB type B digital inputs capable of 192kHz/24bit
- Native DSD2.8 and 5.6 support
- Asynchronous mode
- High quality D/A converter CS4398
- Jitter remover
- Dual Clock
- Noise isolation for all digital inputs (USB-A, Optical, Coaxial, USB-B)
- HDAM & HDAM-SA2
- Gain control to support wide range of headphones
- Fix and variable RCA output
- iDevice capable front USB input
- Gold plated fix level and variable level RCA output terminals
Features
DAC operation modes |
USB / Coax / Optical |
Asynchronous mode rear USB |
Yes |
Bit-perfect transmission |
Yes |
USB-B DSD Audio Streaming |
DSD2.8 / DSD5.6 |
Ground isolator for DAC Mode operation |
Yes |
IPod / iPhone compatible USB input |
Yes |
DAC chip |
CS4398 |
Jitter reducer |
Yes |
HDAM version |
HDAM+HDAM SA2 |
High Grade Audio Components |
Yes |
Customised Components |
Yes |
Inputs / Outputs
Headphone Out |
Yes |
Headphone Volume Control |
Yes |
Headphone Gain Control (low / mid / high) |
Yes |
Analogue Input |
1 |
Analogue Out (fix / variable) |
Yes / Yes |
Digital Optical In / Out |
2 / None |
Digital Coaxial In / Out |
1 / None |
Sample Rate digital In |
192kHz/24bit |
Gold plated Cinch |
Yes |
Front USB |
Yes |
USB type B input for Computer (back) |
Yes |
Asynchronous mode rear USB |
Yes |
Sample Rate USB type B In |
192kHz/24bit |
USB-B DSD Audio Streaming |
DSD2.8 / DSD5.6 |
D-Bus |
Yes |
Specifications
Frequency Response |
2 Hz - 20 kHz |
Signal to Noise Ratio |
106 dB |
Total Harmonic Distortion |
0,0012% |
Channel Separation |
100 dB |
Headphone Power |
800mW / 32 ohm |
General
Available colours |
Silver / Black |
Remote Control |
RC001HD |
Standby Consumption |
0.3W |
Auto power off |
Yes |
Detachable Power Cable |
Yes |
Maximum Dimensions (W x D x H) |
250 x 270 x 90mm |
Weight |
5kg |