Dobrodošli u Player svet! Prijavi se ili Registracija

Svetogorska 9: +381 11 3347 615
+381 11 3347 442
+381 11 3347 883
Sarajevska 68-70: +381 11 2688 067
+381 11 2688 068
+381 11 2688 069
Južni Bulevar 1a: +381 11 4065 432
Futoški put 1: +381 21 3010 626
+381 21 3010 627
Pantelejska 53: +381 18 4200 878
MARTIN JEM Ready 365 Hazer

MARTIN JEM Ready 365 Hazer

Proizvođač: MARTIN JEM Ready 365 Hazer
Dostupnost: Nema na stanju
Šifra Proizvoda: 9397

The JEM Ready 365 is a revolutionary C02 based hazer that produces outstanding fine-particulate atmospheric effects for larger venues. Using an advanced water-based fluid that gives a comparable performance to oil, this premium hazer produces the ultimate transparent haze.



Length: 760 mm (30.0 in.)

Width: 320 mm (12.6 in.)

Height: 280 mm (11.1 in.)

Dry weight: 16 kg (35.3 lbs.)

Filled weight: 19.8 kg (43.7 lbs.)



Coverage volume: 5500 m3 (194,231 ft3) per minute

Operating time with 3.8 l fluid (min/max): 35/200 hours

Typical gas consumption at peak output: 250 g (0.5 lb.) per hour

Continuous effect outputReady time: 7.5 minutes

Ambient noise: Silent mode


Control and Programming

Control options: Digital control panel, programmable fast access

keys, DMX, optional digital remote control, master/slave link mode

Control parameters: Continuous or timer-controlled output

Haze and fan: Independent variable output, 0-100%

DMX channels: 3 (Haze, Fan, Control)

Self-cleaning cycle: Battery-powered automatic shutdown, manually engaged, or DMX

DMX compliance: ANSI E1.11 - USITT DMX512-A

RDM compliance: ANSI E1.20



Housing: Steel and aluminum

Color: BlackHeat exchanger: 600 W trackless heat exchanger, thermally protected

Blower fan: Integrated, 200-2500 RPM

Airflow control: Integrated airflow director

Fluid pump: Oscillating piston, high pressure

Fluid management: 

Fluid out sensing, sealed for transportation

Fluid reservoir: 3.8 l removable concealed reservoir with quick-connect fitting

Gas transfer system: Transfer hose included with push-pull valved quick-connector

Gas management: Onboard proportional valve and digital mix/pressure sensor

Gas monitoring: Low-pressure warning, OFG (Out of Gas) system

Optional fixed regulator*: Fixed output (30 psi), brass housing, 9 mm and 3/8” BSP

*Region-specific, see matrix for ordering information.



FloorOrientation: Horizontal only

Clearance around machine: 100 mm (4.0 in.)

Gas type: Inert gas, industrial grade CO2 or N2 required

Gas storage*: Customer supplied compressed gas cylinder

Gas storage type: Low-pressure, vapor/gas takeoff only

Gas pressure regulation: Regulator required, 30 psi*Region specific.

AC power in/out: Neutrik PowerCon
DMX, link mode in/out: 3-pin and 5-pin locking XLR
Remote control: 3-pin locking XLR
Firmware upgrade: AVR socket
Gas input coupling: Push-pull valved quick-connect coupling, 6 mm (0.3 in.)
EU ModelAC power: 220-240 V, 50/60 Hz
Main fuse: 6.3 AT
Typical power and current: 675 W, 2.9 A*
US Model
AC power: 100-130 V, 50/60 Hz
Main fuse: 10 AT
Typical power and current: 675 W, 5.8 A*
*Measurements made at nominal voltage. Allow for a deviation of +/- 10%
Maximum ambient temperature (Ta max.): 40° C (104° F)
Exterior surface temperature, steady state: 30° C (86° F)
Maximum nozzle temperature: 290° C (554° F)
EU EMC: EN 61000-6-3, EN 61000-6-1
EU safety: EN 60335-1+A15, EN 62233
US safety (pending): UL 998
Canadian safety (pending): CSA C22.2 No 104-01
Calibration factors have been developed and approved by the Actors’ Equity Association and the Broadway League for use in measuring theatrical haze with the JEM Ready 365™ and JEM R365 Haze Fluid™
Included Items
Fluid container 3.8 l: P/N 34300537
Gas transfer hose with connectors, 9mm and 3/8” BSP, 2 m (6.6 ft.):P/N 26460486
Power input cable, EU, powerCON, stripped ends, 2.5 m (8.2 ft.): P/N 11501041
Power input cable, US, powerCON, molded NEMA 5-15P, 2.5 m (8.2 ft.): P/N 11501042

Nazad na kategoriju Efekt Mašine