Dobrodošli u Player svet! Prijavi se ili Registracija

BEOGRAD
Svetogorska 9: +381 11 3347 615
+381 11 3347 442
+381 11 3347 883
Sarajevska 68-70: +381 11 2688 067
+381 11 2688 068
+381 11 2688 069
Južni Bulevar 1a: +381 11 4065 432
+381 64 64 70 100
NOVI SAD
Futoški put 1: +381 21 3010 626
+381 21 3010 627
NIŠ
Pantelejska 53: +381 18 4200 878
+381 64 647 0101
BIJELJINA
Njegoševa 16: +387 55 209 104 +387 55 209 387 +387 66 224 417
KV2 AUDIO VHD3200

KV2 AUDIO VHD3200


Proizvođač: KV2 AUDIO VHD3200
Dostupnost: Nema na stanju
Šifra Proizvoda: 80247
Prikazana cena je za komad.

Power for the VHD subwoofers. The unit contains two separate 1600W amplifiers with individual power supplies, signal paths and I/O within a single four rack space chassis. Bridge mode possibility. The unit acts as a slave for the VHD 2000, which provides audio and control signal, and also functions in the same way for expansion of an ES series system, taking its feed from the external subwoofer output on an EPAK2500R only.


call

VHD3200 - Subwoofer Amplifier

 

  • Power for the VHD subwoofers 
  • The unit contains two separate 1600W amplifiers with individual power supplies, signal paths and I/O within a single four rack space chassis
  • Bridge mode possibility
  • The unit acts as a slave for the VHD 2000, which provides audio and control signal, and also functions in the same way for expansion of an ES series system, taking its feed from the external subwoofer output on an EPAK2500R only
 
VHD3200 - Subwoofer Amplifier
 
 
 

Features

 

  • Two channel 3200W, Control and Amplification System for use specifically with VHD series subwoofers.
  • Bridge mode possibillity.
  • Two individual 1600W, high efficiency, current enhancing switching amplifiers with separate Input and output.
  • Two individual transformers and power supply circuits for increased reliability and improved power delivery.
  • On board amplifier overdrive protection.
  • AC soft start circuitry with two individual ON/OFF AC breaker switches providing thorough power protection.
  • Comprehensive front-to-back cooling system features chassis sealed pcb’s for improved reliability.

 

Output Channels

 

Number of Channels 2
Out. Power 4Ω - 1 channel / 2 channels loaded 1600W / 1600W (RMS)
Out. Power 8Ω - bridged 3200W (RMS)

 

Low Frequency Amplifier Specification

 

Type High efficiency, Low frequency, Current-enhancing switch mode
Distortion <0.05%
Operating Bandwidth 20Hz ÷ 100Hz

 

Signal Input

 

Input Sensitivity 1.0V RMS
Input Impedance 20kΩ (balanced)
Signal Output Main Through OUT

 

Speaker Output

 

Speaker Output 2x EP4 (1x EP4 bridge)

 

Features

 

System setup Limiter / Short protection

 

Power

 

Power Connector 2x Neutrik PowerCon®
Operating Voltage 115V / 230V / 250V
Operating Voltage Range 100÷120V@60Hz | 205÷240V@50Hz | 225÷260V@50Hz
Recommended Amperage 2 x 20A 115V | 2 x 10A 230V| 2 x 10A 250V
Soft Start YES
Protection Thermal breaker
Cooling 2x temperature controlled fans

 

Physical Dimensions

 

Height 177.8mm (7.0")
Width 483mm (19.0")
Depth 495mm (19.5")
Weight 35kg (88lbs)



Nazad na kategoriju Hi-Def Sistemi