VAŽNO OBAVEŠTENJE! Mnogi inostrani web sajtovi (ukoliko pristupate iz Srbije), pokazuju cene bez carinskih dažbina i PDV-a koje su u proseku 30% niže. Molimo sve kupce da pažljivo obrate pažnju koji su uslovi kupovine, kako bi poređenje cena bilo na jednakom nivou!

Dobrodošli u Player svet! Prijavi se ili Registracija

Svetogorska 9:
+381 11 3347 442
+381 11 3347 615
+381 11 3347 883
Sarajevska 68-70:
+381 11 2688 067
+381 11 2688 068
+381 11 2688 069
Ugrinovački Put 10n
+381 11 3739 701
+381 11 3774 968
+381 11 3774 969
Futoški put 1:
+381 21 3010 626
+381 21 3010 627
Pantelejska 53:
+381 18 4200 878
+381 64 647 0101
Njegoševa 16:
+387 55 209 104
+387 55 209 387
+387 66 224 417

ONKYO A 9030 Black

Proizvođač: ONKYO A 9030 Black
Dostupnost: Na stanju
Šifra Proizvoda: 8179
Prikazana cena je za komad.

For those taking their first steps into the world of hi-fi audio, there’s no better component to start with than the A-9030 Integrated Stereo Amplifier. Featuring Onkyo’s Wide Range Amp Technology augmented by Three-Stage Inverted Darlington Circuitry to reduce distortion and increase driving power the low negative feedback design breathes life into your recordings, where conventional amps sound flat and dull by comparison. Another point of difference lies in its ability to boost bottom-end response. Rather than obscuring the frequencies that typically carry vocals, a new system phase-matches the bass to preserve a crystal clear mid-range. As well as sounding great, the amplifier has a heavy-duty transformer and twin capacitors to deliver enough power to drive your loudspeakers with depth and dynamism. Good quality analog inputs and banana plug-compatible speaker posts are found on the rear panel to connect your CD player, tuner, turntable, and speakers, while the front panel has classic style knobs for bass, treble, balance, and input selection. Wrapped in a 1.6 mm-thick anti-resonant chassis, and boasting an aluminum faceplate, this high-value stereo amp exudes the build quality for which Onkyo is famous.

€ 399 € 299

* Ukoliko pronađete povoljniju ponudu za ovaj artikal, dobićete ga od nas jeftinije za 10% od razlike u ceni!




             Svaki ONKYO uređaj imaće garanciju na teritoriji Republike Srbije ukoliko je

                                                    kupljen  kod ovlašćenih dilera:


PLAYER PLUS, Svetogorska 9, 11000 Beograd
PLAYER PLUS, Sarajevska 68-70, 11000 Beograd
BGB Studio 
Win Win
Absolute Music Shop



Onkyo je japanski proizvodjač potrošačke elektronike, specijalizovan za kućne bio-skope i Hi Fi audio opremu. Nastao je 1946. godine pod imenom OSAKA DENKI ONKYO KK. Današnja korporacija obuhvata INTEGRA I INTEGRA ISTRAŽIVAČKE DIVIZIJE kao i glavni ONKYO brend, pod rukovodstvom NAOTO OTHSUKI. Sama reč “ONKYO” može da se prevede kao “HARMONIJA ZVUKA”.

Još u ranim fazama istorije korporacije, Onkyo se razvijao kao inovator i plasirao u sam vrh audio tehnologija, postavši sinonim savršenstvu zvuka, kao i visoko kvalitetnim zvučnicima i komponentama.



WRAT (Wide Range Amplifier Technology) for Naturally Vivid Sound

Onkyo developed the WRAT suite of technologies to improve the clarity and character of amplified audio. The technologies work to reduce noise across the frequency range, guaranteeing a clear, balanced, and natural sound. It achieves this by employing a low negative feedback amplifier design, preserving the essential energy and life contained within the recording; using closed ground-loops to cancel unwanted noise from individual circuits; and by enabling high current flows to cancel reflex energy from the speakers.


Innovative Three-Stage Amplifier Circuit Brings Your Music to Life

While some hi-fi makers take a shortcut to amplified audio with the use of cheap all-in-one IC chips, the resulting sound is often compromised once you turn the volume up. Instead, on the A-9030, Onkyo uses the same Three-Stage Inverted Darlington Circuitry technology it uses in its highend A/V receivers and Reference Series hi-fi separates. This innovative circuit topology facilitates high speaker-driving power, reduces distortion, and preserves the buoyancy and expressiveness of recorded music—a unique characteristic of our low negative feedback amplifiers.


Optimal Gain Volume Control Guarantees CleanerSound

Conventional volume-attenuation methods involve initially dropping a signal close to the amplifier’s natural noise floor at low volumes. The signal can then become tainted with noise, which subsequently gets amplified along with the signal. Onkyo’s Optimum Gain Volume Control Circuitry adjusts the gain so that less than half the typical amount of attenuation is necessary. The signal never comes close to the noise floor, and the result is noticeably clearer sound when compared to conventional amplifier designs.


Phase-Matched Bass Boost for Deeper Bass and a Clearer Mid-Range

From the warm low notes produced by a cello to the deep frequencies of electronic music, a good amplifier should be able to deliver plenty of bass without distorting. Some amplifiers are prone to the effects of phase shifting, which can overwhelm middle frequencies and muddy the overall sound. Our Phase-Matching Bass Boost technology effectively preserves mid-range clarity—allowing vocals and strings to shine while maintaining a smooth, natural bass response at all volume levels.


Discrete Output Stage Circuitry Means Cooler Running Temperatures

A receiver’s ability to deliver high power into low impedances is a vital factor in its performance. If the current flow through the amplification circuit is inconsistent, audio quality will suffer. Onkyo stereo amplifiers feature separate high-quality components at the signal output stage. Discrete transistors help guarantee a consistent, stable supply of current to the speaker system for an open and assured performance, with less chance of distortion and cooler running temperatures.


High-Output Power Supply to Drive Your Speakers

At the heart of all our amplifiers, you’ll find a power supply that can maintain or increase output power as required. Musically, this means that you have deep, powerful bass; wide-ranging dynamics; musical peaks what sound composed; and correct timbre and sound staging. When paired with a set of quality loudspeakers, Onkyo amplifiers have the capability to drive them with ease. In the case of the A-9030, you will find a high-output power transformer, two 8,200 µF capacitors, and a low-impedance bus bar for perfect ground potential. All work in concert to enhance the power and fidelity of your audio sources.


Quality Construction Equals Better Performance

A vital factor in any audio component is its build quality. It’s not just about good looks. The build quality of the chassis, the construction techniques used, the electronic parts chosen all combine to shape the outputted audio signal. The A-9030’s anti-resonant chassis is designed to isolate the audio signal from any vibrations that may cause interference during the amplification process. This chassis is superbly



Key Features

  • WRAT (Wide Range Amplifier Technology) for Naturally Vivid Sound
  • Innovative Three-Stage Amplifier Circuit Brings Your Music to Life
  • Optimal Gain Volume Control Guarantees Cleaner Sound
  • Phase-Matched Bass Boost for Deeper Bass and a Clearer Mid-Range
  • Discrete Output Stage Circuitry Means Cooler Running Temperatures


  • 65 W/Ch (8 Ω, 1 kHz, 0.08% THD, 2 Channels Driven, IEC)
  • Three-Stage Inverted Darlington Circuitry
  • WRAT (Wide Range Amplifier Technology)
  • Phase-Matching Bass Boost
  • High-Current Low-Impedance Drive
  • Thick, Low-Impedance Bus Bar for Perfect Ground Potential
  • Two 8,200 µF Capacitors 
  • Optimum Gain Volume Control
  • Direct Mode
  • 1.6 mm Full Flat Chassis
  • Aluminum Front Panel
  • Tone Control (Bass/Treble/Balance)
  • 5 Analog Audio Inputs and 1 Output
  • Phono Input (MM)
  • Subwoofer Pre-Out
  • Speaker A/B Drive
  • Banana Plug-Compatible Speaker Posts
  • Headphone Jack
  • RI (Remote Interactive) Remote Control


Amplifier Section

Power Output

65 W/Ch (8 O, 1 kHz, 0.08% THD, 2 Channels Driven, IEC)

THD+N (Total Harmonic Distortion + Noise)

0.08% (1 kHz, 1 W Output)

Damping Factor

60 (1 kHz, 8 O)

Input Sensitivity and Impedance

175 mV/33 kO (Line), 
4.8 mV/47 kO (Phono MM)

Rated RCA Output Level and Impedance

0.175 V/2.2 kO (Rec Out)

Phono Overload

100 mV (MM, 1 kHz, 0.5%)

Frequency Response

10 Hz-100 kHz/+1 dB, -3 dB (Line 1)

Tone Control

+/-14 dB, 100 Hz (Bass), 
+/-14 dB, 10 kHz (Treble), 
+8 dB, 80 Hz (PM Bass)

Signal-to-Noise Ratio

105 dB (Line, IHF-A), 
80 dB (Phono MM, IHF-A)

Speaker Impedance

4 Ohms - 16 Ohoms (A or B), 8 Ohms - 16 Ohms (A + B)


Power Supply AC

220-230 V~, 50/60 Hz

Power Consumption

135 W

Standby Power Consumption

0.3 W

Dimensions (W x H x D)

435 x 139 x 330.3 mm


7.4 kg


Dimensions (W x H x D)

572 x 264 x 419 mm


9.4 kg

Supplied Accessories

Instruction manual


AC power cord


Remote controller


AAA (R03) batteries

x 2




Nazad na kategoriju Integrisana pojačala