VAŽNO OBAVEŠTENJE! Mnogi inostrani web sajtovi (ukoliko pristupate iz Srbije), pokazuju cene bez carinskih dažbina i PDV-a koje su u proseku 30% niže. Molimo sve kupce da pažljivo obrate pažnju koji su uslovi kupovine, kako bi poređenje cena bilo na jednakom nivou!

Dobrodošli u Player svet! Prijavi se ili Registracija

BEOGRAD

Važno obaveštenje!
Zbog renoviranja prodavnice u Svetogorskoj 9,
kompletan prodajni asortiman,
>>> osim Hi-Fi opreme, <<<
je izmešten u naše prodavnice u Sarajevskoj 68-70 i Južnom Bulevaru 1a.
Hvala na razumevanju!


Svetogorska 9:
+381 11 3347 442
+381 11 3347 615
+381 11 3347 883
Sarajevska 68-70: +381 11 2688 067
+381 11 2688 068
+381 11 2688 069
Južni Bulevar 1a: +381 11 4065 432
+381 64 64 70 100
NOVI SAD
Futoški put 1: +381 21 3010 626
+381 21 3010 627
NIŠ
Pantelejska 53: +381 18 4200 878
+381 64 647 0101
BIJELJINA
Njegoševa 16: +387 55 209 104 +387 55 209 387 +387 66 224 417

M-AUDIO MicroTrack 10dB Pad


Proizvođač: M-AUDIO MicroTrack 10dB Pad
Dostupnost: Na stanju
Šifra Proizvoda: 4263
Prikazana cena je za komad.

Passive In-line 10dB Pad for the MicroTrack Top Features passive -10dB attenuator > reduces chances of overloading MicroTrack input 5V pass-through > works with phantom-powered electret condenser mics The MicroTrack 10dB Pad is a specially designed attenuator for the 1/8” microphone input on the MicroTrack—or any device with similar output impedance and phantom power characteristics. It reduces the output of a connected electret condenser microphone by approximately 10dB, which protects the input stage of the MicroTrack from becoming overloaded and distorting when recording high-SPL sources. The in-line pad attenuates the audio signal from the mic while passing unaltered the 5V supply needed to power the internal preamp of electret condenser microphones.


€ 20.81

* Ukoliko pronađete povoljniju ponudu za ovaj artikal, dobićete ga od nas jeftinije za 10% od razlike u ceni!

Passive In-line 10dB Pad for the MicroTrack

Top Features

passive -10dB attenuator > reduces chances of overloading MicroTrack input
5V pass-through > works with phantom-powered electret condenser mics
The MicroTrack 10dB Pad is a specially designed attenuator for the 1/8” microphone input on the MicroTrack—or any device with similar output impedance and phantom power characteristics. It reduces the output of a connected electret condenser microphone by approximately 10dB, which protects the input stage of the MicroTrack from becoming overloaded and distorting when recording high-SPL sources. The in-line pad attenuates the audio signal from the mic while passing unaltered the 5V supply needed to power the internal preamp of electret condenser microphones.



Nazad na kategoriju Konektori