Dobrodošli u Player svet! Prijavi se ili Registracija

BEOGRAD
Svetogorska 9: +381 11 3347 615
+381 11 3347 442
+381 11 3347 883
Sarajevska 68-70: +381 11 2688 067
+381 11 2688 068
+381 11 2688 069
Južni Bulevar 1a: +381 11 4065 432
+381 64 64 70 100
NOVI SAD
Futoški put 1: +381 21 3010 626
+381 21 3010 627
NIŠ
Pantelejska 53: +381 18 4200 878
+381 64 647 0101
BIJELJINA
Njegoševa 16: +387 55 209 104 +387 55 209 987 +387 66 222 070
Q ACOUSTICS 6.5

Q ACOUSTICS 6.5" In-Ceiling Speaker Performance


Proizvođač: Q ACOUSTICS 6.5" In-Ceiling Speaker Performance
Dostupnost: Nema na stanju
Šifra Proizvoda: 80223
Prikazana cena je za komad.

The Q Acoustics 6.5” Performance in-ceiling stereo speaker offers the latest technology in order to fulfil the toughest of demands from an in-ceiling speaker. They give you the ability to listen to music throughout your home, even in bathrooms as they are moisture proof. Whereas before you were not able to listen to the same music in many rooms the 6.5” Performance in-ceiling stereo speaker gives you the ability to do that. Great for entertaining, or simply wanting to watch a movie, these speakers can serve for many purposes.


€ 177

 

6.5" In-Ceiling Speaker

 

Q Install Performance

 

The Q Acoustics 6.5” Performance in-ceiling stereo speaker offers the latest technology in order to fulfil the toughest of demands from an in-ceiling speaker. They give you the ability to listen to music throughout your home, even in bathrooms as they are moisture proof. Whereas before you were not able to listen to the same music in many rooms the 6.5” Performance in-ceiling stereo speaker gives you the ability to do that. Great for entertaining, or simply wanting to watch a movie, these speakers can serve for many purposes.

 

 

 circular QI65C ST Circular Grille
 square QI65S ST Square Grille

 
 

Features

 

  • Bezel and grille design that clips magnetically into place, with the grille geometry being carefully optimized to ensure the perfect balance between sound and discreet appearance
  • The HF is adjustable by + or - 3dB from a switch on the crossover
  • Circular and square grille options are available to ensure the perfect match for each customer's decor.
  • Only 6.5” in diameter, they are hardly visible in your home and take up virtually no space
  • Less than 84 mm deep.
  • 'UL94' flame retardant materials
  • Moisture proof
  • Q Install speakers come carefully packaged with installation template and fitting instructions

 

Easy to install

 

  • A cutter guide is supplied to mark out the hole you need to make
  • The speakers attach to your ceiling via four clamps you screw from the front
  • Speaker terminals have push open connectors that you can do with one hand
  • The grilles attach via magnets

 

Speaker Specifications

 

Tweeter: Swivel
Tweeter diameter: 1 x 1" (25mm)
Woofer diameter: 165mm
Power handling (program): 15-80W
Impedance (nominal) ohms: 8ohm
Sensitivity dB spl (2.83V, 1m): 90 (switchable HF)
Response(Low freq.) -3dB Hz: 70
Maximum rear depth: 79mm
Size(Round grilles): 232mm dia
   

 

 

How to guide

 

Step 1

 

Select a suitable mounting location for the speaker taking note of the Warning Notices above. Using the installation template supplied mark the speaker position and cut the mounting hole. 

 

Step 2

 

Make sure all equipment is switched off.  The speaker cable should be stripped back ~10mm so that there are bare wire ends. Remove the packaging and protective dust cover from speaker and attach the speaker leads using the pushdown spring clip terminals at the rear of the speaker. The positive conductor should be connected to the red terminal and the negative conductor to the black terminal. For single stereo versions there are two sets of terminals for connection of left and right channels.  

Note: Tweeter output level adjustment (‘P’ & ‘CW’ versions)

It is recommended to leave the switch in the ‘0’ position for the initial sound check.

 

Step 3

 

Check that each of the 4 swing out clamps are rotated inwards. Push the speaker through the mounting hole and position flush with the ceiling. Whilst holding the speaker in place tighten each of the mounting screws using a No. 2 Pozidriv® screw driver in the order shown in the diagram (left). When an increase in resistance is felt the clamp is in position.

 

 

 

 

 

 

 

 

 
Step 4

 

Once the speakers are installed they should be tested before the grilles are fitted. The tweeter’s outer frame (not dome) should be pushed gently to achieve the desired tweeter position.  

 

Step 5

 

The 6.5” Professional in-ceiling single stereo speaker features a magnetic grille, locate the grille over the speaker bezel where it will be pulled into place. Note that square grilles may be positioned at any angle required.

Some models feature a white backing cloth behind the grille to help minimize visual contrast with the ceiling. For the very best sound performance it is recommended that this cloth is removed before use. To remove simply peel away the backing cloth from the grille.

 



Nazad na kategoriju Kućni Zvučnici