Mnogi inostrani web sajtovi (ukoliko pristupate iz Srbije), pokazuju cene bez carinskih dažbina i PDV-a koje su u proseku 30% niže. Molimo sve kupce da pažljivo obrate pažnju koji su uslovi kupovine, kako bi poređenje cena bilo na jednakom nivou!
The Definition Subwoofer shares the same purity of purpose and contemporary design that embodies all Definition series loudspeakers. Seamlessly blending power and passion with detail and control, the Definition Subwoofer delivers smooth LF extension with music and thunderous Low Frequency Effects with movies. A design of simplicity and refined power, a 1KW amplifier drives an opposing pair of 300mm (12in) long throw metal-cone drivers in a substantial plywood cabinet. Definition Subwoofer is designed and engineered with Tannoy’s fundamental principles of precision and articulation at its heart.
* Ukoliko pronađete povoljniju ponudu za ovaj artikal, dobićete ga od nas jeftinije za 10% od razlike u ceni!
At the heart of the Definition Subwoofer is a cutting edge 1000Watt Class D amplifier with high speed switch mode power supply. Boasting exceptionally low Total Harmonic Distortion (less than 0.05%) this amplifier delivers massive dynamic power to control the twin metal-cone LF drivers. The amplifier module is mated to a powerful Digital Signal Processing (DSP) engine that offers user controls entirely in the digital domain for the most accurate set-up and LF response. A multifunction rotary control device and LCD display are mounted on the front panel for simple user control.
To handle the extreme power, the Definition Subwoofer uses two 300mm (12inch) aluminium cone drivers arranged as an opposing pair and mounted either side of the ply-wood cabinet. After extensive testing aluminium drivers were specified for their true pistonic motion at high levels and good heat transfer properties allowing them to be driven very hard for extended periods of time. The drivers’ dies cast aluminium chassis has been designed to afford maximum driver venting to maximise excursion.
The substantial subwoofer cabinet is finely constructed from Tannoy’s signature birch-ply laminate sourced from cooler, slowing growing regions. Constructed of 25mm thick laminate, the cabinet uses a mix of flat and curved panels to improve rigidity as well as disperse internal reflections and standing waves. Definition Subwoofer offers a flexible suit of connections allowing one or more subs to be connected in the system and compatibility with both phono RCA and balanced XLR signals.
Each Definition Subwoofer is hand finished in a choice of high gloss black or high gloss lacquered real wood veneers to match the Definition loudspeaker range. Each Definition Subwoofer offers heavy duty CNC machined aluminium feet for optimum stability and convenient front mounted rotary controls with LCD display.
1000 W RMS
Low frequency response (-6 dB) (Typical in room)
2 x Phono line level, 2 x XLR balanced
Input sensitivity (full power)
0.3 / 0.6 V (switchable) @ 100 Hz
22 k ohm
2 x Phono line level 2 x XLR balanced 31- 125 Hz, 2nd or 4th order high-pass
31- 125 Hz, 2nd or 4th order-low pass with LFE provision
After delay or permanently on (switchable)
2 x 300 mm (12”) High Excursion Aluminium cone, side firing 50 mm (2”) voice coil field stabilised Ferrite Motor System
94 Litre (3.32 cu. ft.)
Dimensions, (H x W x D) Including feet, grilles & terminals
514 x 562 x 493 mm (20.24 x 22.13 x 19.41”)
38.5 kg (84.9 lbs)
230 V or 115 V (nominal), factory set 50 - 60 Hz
Standby power consumption
< 0.5 W (EUP Compliant)
3 x User defined presets Variable phase control 0- 180 degrees Parametric Equaliser x 2, -12/ 3 dB Range 31-125 Hz, Q= 2- 14.4