DMX Common Controller
DMX controlleradopts the advanced micro control unit it, receives standard DMX-512 digital control signal and transformed it into PWM signal for driving LED;You could connect DMX module with DMX digital console to achieve dimming or various changes in procedures. i
DMX controller is designed to convert the universal standard DMX512/1990 signal into analog signal to control our RGB Flex Strips, it allows user to choose 1~3 output channel, with 256-level brightness control. This decoder connects to and can be controlled by DMX Light Boards, our DMX Touch Controllers or other DMX Controllers/DMX Computer Interfaces allowing its user to create endless possibilities of light shows.
- DC imput 12V
- Output Current：5A per channel（total current: 15A）
- Output Power：75W（5V）180W(12V) 360W(24V)
- Brightness Control ：256 256 levels
- DMX Address：3 channels
- DMX512 Standard：DMX512/1990
- Product Dimension：125x66x54 mm
Ⅱ. Basic Functions
1.) 256 steps of smooth brightness adjusting.
2.) User addressable DMX interface-with easy dip-switch settings and testing modes.
3.) High power output, 3 output channels.
4.)DMX pass through and in/out connector for daisy chain configurations.
It has built in testing or stand alone features. Just turn on the last dip switch labeled (fun) to enable stand alone mode (when you don't have a DMX signal or for testing). By using different combinations of the dip switches, you can set the color or fade/flash modes and adjust the speed.
||Wall Mount, Other
|Number Of Chanels
|Rated Amps / Ch
|Recommended Power Supply Size
||12-180 Watt / 1-15 Amp Depending on connected strip length
1x 3-Pin XLR Input
1x 3-Pin XLR Output
Output Connections (To Strips)
Ch 1 = Red (red wire)
Ch 2 = Green (green wire)
Ch 3 = Blue (blue or white wire)
Com = + (black wire)
|Power Input: Connection Type, Voltage, Amperage
||(Plug-able Screw Terminal Strip) DC5V-DC24V (+)/(-) note for 12v strips use 12v input
|Output Connection Type
||(Plug-able Screw Terminal Strip)
|Can Power/Control (xx) Feet of strip
||Up to 80' of RGB Flex Strip or 5A/Ch
||DMX or built in Fun/Test Mode Switch
|Number Of Control Modes
||Full Control with DMX or 7 Static, 1 Fade and 1 Flash in Fun/Test Mode
|Steps of Speed Adjustment
||Full Control with DMX or 7 Steps in Fun/Test Mode
|Dimmable Range / Steps
||0-100% via DMX in 256 steps
|Wire Color Code Chart
- Ch 1 = Red (red wire)
- Ch 2 = Green (green wire)
- Ch 3 = Blue (blue/white wire)
- Com = + (black wire)
||Includes solder on Male+Female DMX 3pin Jacks
Female Barrel Connector for easy connection to out Power Supplies
Control Cable for connecting to distant Flex Strips
Available Options (may not be in stock)
4x Chanel Version for RGBW or RGBA or Custom Single Color Applications 4A/Ch
We can coat circuit board with a water resistant coating for outdoor use.
Constant Current 350 or 700mA version for driving High Power Star type emitters