Dobrodošli u Player svet! Prijavi se ili Registracija

BEOGRAD
Svetogorska 9: +381 11 3347 615
+381 11 3347 442
+381 11 3347 883
Sarajevska 68-70: +381 11 2688 067
+381 11 2688 068
+381 11 2688 069
Južni Bulevar 1a: +381 11 4065 432
NOVI SAD
Futoški put 1: +381 21 3010 626
+381 21 3010 627
NIŠ
Pantelejska 53: +381 18 4200 878
M-AUDIO PULSAR II

M-AUDIO PULSAR II


Proizvođač: M-AUDIO PULSAR II
Dostupnost: Uskoro na stanju
Šifra Proizvoda: 61060
Prikazana cena je za komad.

PULSAR II - Matched Pair Small-Diaphragm Condenser Microphones Top Features Two Pulsar II microphones > performance matched for accurate stereo sound Switchable pads and low-cut filters > provides outstanding versatility Transformerless FET electronics > designed for low noise and minimal coloration Solid brass body with internal shockmounts > delivers premium protection and performance Includes stereo bar, risers and hard mounts > allows excellent stereo positioning Full Features Two response-matched M-Audio Pulsar II microphones 0.75" diameter, 6-micron sputtered gold diaphragms Cardioid pickup patterns Class A FET transformerless electronics Brass bodies with internal shockmounts Switchable 10 dB pads and 80 Hz filters (18 dB/octave) 48 Volt phantom power required Includes stereo bar, hard mounts, risers, wind screens, and soft bags—all in a wooden travel case Specifications Type: Large diaphragm condenser, gold evaporated Polar pattern: Cardioid Frequency response: 20 Hz-20 kHz Sensitivity: 13.8 mV/Pa (-37dBV) Max. SPL (<0.5% Threshold Level): 134dB; 144 dB using -10 dB Pad Equivalent noise level: 15dB—A weighted Output impedance: 300-600 Ω Suggested Mic Pre Input Impedance: 1 - 2.5k Ω Preamp topology: Class A FET, transformerless Power requirement: 30 VDC - 50 VDC phantom power Connector: 3-pin male XLR Dimensions: 22mm (0.87") diameter x 132mm (5.20") length Weight: 115 g (4.0 oz.) Capture Superior Stereo Recordings Carefully selected for their nearly identical response, matched pairs of Pulsar II microphones from M-Audio® deliver superior stereo performance. The brass bodies are equipped with internal shockmounts and low-noise transformerless electronics. Each microphone offers a switchable 10 dB attenuation pad, plus an 80 Hz low-cut filter. Together, these functions allow the Pulsar II microphones to adapt to a variety of applications. The included hardware package allows Pulsar II microphones to be mounted in either an X-Y or ORTF (110º) stereo configuration. While ideal for stereo use, these microphones can also be used independently in a wide range of critical recording situations. This complete package includes a stereo mounting bar, hard mounts, risers, windscreens, and cloth bags, as well as a handsome and functional wooden storage/travel case.


call

PULSAR II - Matched Pair Small-Diaphragm Condenser Microphones


 

Top Features

Two Pulsar II microphones > performance matched for accurate stereo sound
Switchable pads and low-cut filters > provides outstanding versatility
Transformerless FET electronics > designed for low noise and minimal coloration
Solid brass body with internal shockmounts > delivers premium protection and performance
Includes stereo bar, risers and hard mounts > allows excellent stereo positioning



Full Features

Two response-matched M-Audio Pulsar II microphones
0.75" diameter, 6-micron sputtered gold diaphragms
Cardioid pickup patterns
Class A FET transformerless electronics
Brass bodies with internal shockmounts
Switchable 10 dB pads and 80 Hz filters (18 dB/octave)
48 Volt phantom power required
Includes stereo bar, hard mounts, risers, wind screens, and soft bags—all in a wooden travel case



Specifications

Type: Large diaphragm condenser, gold evaporated
Polar pattern: Cardioid
Frequency response: 20 Hz-20 kHz
Sensitivity: 13.8 mV/Pa (-37dBV)
Max. SPL (<0.5% Threshold Level): 134dB; 144 dB using -10 dB Pad
Equivalent noise level: 15dB—A weighted
Output impedance: 300-600 Ω
Suggested Mic Pre Input Impedance: 1 - 2.5k Ω
Preamp topology: Class A FET, transformerless
Power requirement: 30 VDC - 50 VDC phantom power
Connector: 3-pin male XLR
Dimensions: 22mm (0.87") diameter x 132mm (5.20") length
Weight: 115 g (4.0 oz.)
 

 

Capture Superior Stereo Recordings

Carefully selected for their nearly identical response, matched pairs of Pulsar II microphones from M-Audio® deliver superior stereo performance. The brass bodies are equipped with internal shockmounts and low-noise transformerless electronics. Each microphone offers a switchable 10 dB attenuation pad, plus an 80 Hz low-cut filter. Together, these functions allow the Pulsar II microphones to adapt to a variety of applications. The included hardware package allows Pulsar II microphones to be mounted in either an X-Y or ORTF (110º) stereo configuration. While ideal for stereo use, these microphones can also be used independently in a wide range of critical recording situations. This complete package includes a stereo mounting bar, hard mounts, risers, windscreens, and cloth bags, as well as a handsome and functional wooden storage/travel case.



Nazad na kategoriju Mikrofoni