Specifications

PM-SUBmini2

-Speaker type: Sealed type
-Impedance: Woofer: 4 Ω
-Amplifier maximum output: Woofer: 50 W
-Input: RCA pin jack × 1
-Maximum input level: +15 dBV Input impedance: 10 kΩ
-Crossover adjustment range: 60 Hz to 150 Hz
-Frequency response: 40 Hz to 150 Hz
-S/N ratio: 80 dB
-External dimensions (mm): 200 (W) × 185 (H) × 233 (D)
-Weight: about 3.6 kg
-Power consumption: During normal use: about 15 W During standby mode: 0.5 W or less - See more at: http://www.fostexinternational.com/docs/products/PM-SUBmini2.shtml#content-3-tab-tab

Specifications

PM0.4C

Enclosure: 2way bass reflex
Low range driver: 100 mm (4 inch) cone speaker
High range driver: 19 mm (3/4 inch) soft dome tweeter
Frequency characteristic: 60 Hz to 20 kHz
Crossover frequency: 1.6 kHz

Amplifier (active speaker only)

Input terminal: RCA pin jack, 320 mV (input sensitivity)
Input impedance: 10 kΩ or more
Rated output: 30 W + 30 W
Distortion factor (THD): Less than 0.05% (2 W output)

General

Power (AC IN): 100 to 240 V  50/60 Hz
Power consumption: 15 W (normal state), 0.5 W or less (standby state)
External dimension (mm): 130 (width) × 220 (height) × 169 (depth) (not including protrusions)
Weight: 2.4 kg (active speaker), 2.1 kg (passive speaker)