Do besplatne dostave Vam je ostalo još 2.000,00 RSD
RSD
 
 
+
×

ART PRO AUDIO DADB

Šifra:
10.680,00 rsd
8.900,00 rsd (Bez PDV-a)
Iznos rate:
Prikazana cena je za komad.

Garantujemo najnižu cenu!

Prijavi povoljniju cenu Obavesti me ako cena padne Postavi pitanje
Opcija:

The dADB from ART is a dual channel active direct box that acts as two independent, high-quality interfaces for connecting instrument, line, or speaker level signals to balanced inputs. The high impedance 1/4" inputs are buffered by extremely low-noise, active electronics to deliver isolated, balanced, low impedance outputs. A flat and wide frequency response, even at high input levels, makes the unit a virtually transparent DI solution.

Input attenuation switches on each channel allow for attaching a wide range of source signal levels, while independent parallel "Thru" jacks allow for tapping the signal chains. A ground lift switch on each channel allows for totally isolating any two systems by separating the input and output signal grounds, thus reducing hum and ground-loop noise.

Switchable low-pass Bessel filters eliminate high frequency interference, primarily from radio frequencies before they can get into the main system. They also effectively reduce digital noise generated by computers, making the unit an ideal DI solution for laptops, computer workstations and peripherals when used in stereo PA applications.

The dADB can be powered from phantom power or by a 9V battery when external power is not available. Low current draw should provide more than 100 hours of operation with a new battery (alkaline recommended). The compact, black, all-steel case and active design ensure long-term reliability in live sound, permanent/fixed installs, DJ, or virtually any PA application.

Fully active design
Operates on phantom power or 9V battery (not included)
Converts high-impedance balanced/unbalanced inputs into 600Ω balanced outputs
Switchable input attenuation (0, -20, -40dB)
Independently switchable low-pass filter on each channel
Independently switchable phase invert on each channel
Independently switchable ground lift on each channel
1/4" TRS connector inputs and thru connections
XLR connectors for balanced outputs
Rugged steel case

ART DADB Specs
Type Active
Input Connections 2 x 1/4" TRS phone
Input Impedance 470kΩ
Maximum Input Level +4, +24, +44dBu, depending on attenuator setting
Output Connectors 2 XLR
2 x 1/4" TRS phone (Thru)
Output Impedance >600Ω
Maximum Output Level +6dBu (battery powered)
+14dBu (phantom powered)
Controls 2 x Switch Low-Pass Filter
2 x Switch Phase Inverse
2 x Switch Ground Lift
1 x Switch Battery Power On/Off
Frequency Response 10Hz to 100kHz, +/-0.5dB @ +0dBu
THD <0.05%, typical
Dynamic Range >100dB, typical
Crosstalk >80dB (typical)
Power 9V @ 7.5mA (battery, alkaline recommended)
18~48VDC @ 6.4mA (phantom power, per channel)
Dimensions 5.75 x 5 x 2" (146 x 127 x 51mm)
Weight 2.7 lb (1.22kg)
Specialties Input Attenuation
0.0dB, -20dB, -40dB, switchable
Packaging Info
Package Weight 2.65 lb
Box Dimensions (LxWxH) 6.1 x 5.4 x 2.2"

Ocena:

Vezani artikli


Srodni proizvodi

ART DUAL RDB - DI Box

11.880,00 rsd
Dodaj u korpu