Dobrodošli u Player svet! Prijavi se ili Registracija

BEOGRAD
Svetogorska 9: +381 11 3347 615
+381 11 3347 442
+381 11 3347 883
Sarajevska 68-70: +381 11 2688 067
+381 11 2688 068
+381 11 2688 069
Južni Bulevar 1a: +381 11 4065 432
+381 64 64 70 100
NOVI SAD
Futoški put 1: +381 21 3010 626
+381 21 3010 627
NIŠ
Pantelejska 53: +381 18 4200 878
+381 64 647 0101
BIJELJINA
Njegoševa 16: +387 55 209 104 +387 55 209 987 +387 66 222 070
EIGHTEEN SOUND 21LW1400 8ohm

EIGHTEEN SOUND 21LW1400 8ohm


Proizvođač: EIGHTEEN SOUND 21LW1400 8ohm
Dostupnost: Na stanju
Šifra Proizvoda: 6852
Prikazana cena je za komad.

Key features 99 dB SPL 1W / 1m average sensitivity 100 mm (4 in) Interleaved Sandwich Voice coil (ISV) 1400W AES power handling Double Silicon Spider (DSS) for improved excursion control and linearity Double Demodulating Rings (DDR) for lower distortion Improved heat dissipation via unique basket design Weather protected cone and plates for outdoor usage Suitable for ultra low frequency systems Downloads  Data sheet  Drawing   Description The 21LW1400 is a 21 inch high performance extended low frequency loudspeaker. The transducer can be used as a subwoofer component, in either a reflex, band-pass or horn-loaded configuration, in high power auditorium or arena loudspeaker systems. It provides clean and undistorted LF reproduction at very high SPL and enables the speaker to withstand high power levels without damage.The 21LW1400 design features include an exceptional displacement suspension system which, in conjunction with a carbon fiber reinforced straight-ribbed cone and the Double Silicon Spider (DSS), produces an ultra-linear piston action, providing full control across the entire working range.The 100mm inside outside copper voice coil, based on our Interleaved Sandwich Voice-coil (ISV) technology, reaches high levels of thermal stability and durability. ISV technology is based on a high strength fiberglas former with half the coil wound on the outside and half on the inside and bonded together using unique high temperature resin adhesives. This results in a balanced linear motor unit which can exert an exceptionally high force factor.The low distortion and unmatched sound quality of the 21LW1400 has been significantly improved by the Double Demodulating Rings (DDR) embedded in the pole piece of the magnetic structure. These have been designed to dramatically reduce the intermodulation and harmonic distortion while improving transient response at the same time.Excellent heat dissipation has been achieved using the special basket design which incorporates air channels between the basket and the magnetic top plate. In addition, 8 air vents incorporated into the back plate are aligned with the voice coil to force air into the lower part of the gap.21LW1400 is ready to perform properly under inclement weather conditions. This has been achieved using of an exclusive treatment which improves pulp strength and gives water repellent properties to both sides of the cone. Moreover, a special treatment is applied to the top and back plate of the magnetic structure which is far more resistant to the corrosive effects of salts and oxidization than any other treatment in use.   GENERAL SPECIFICATIONS Nominal Diameter 533 mm (21 in) Rated Impedance 8 Ohm AES Power 1400 W Program Power (1) 1600 W Peak Power (2) 7000 W Sensitivity (3) 99 dB Frequency Range (4) 24 - 2000 Hz Power Compression @-10dB (5) 0,6 dB Power Compression @-3dB 1,5 dB Power Compression @Full Power 2,2 dB Max Recomm. Frequency 250 Hz Recomm. Enclosure Volume 120 ÷ 500 lt. (4,24 ÷ 17,7 cuft) Minimum Impedance 6,4 Ohm at 25°C Max Peak To Peak Excursion 52 mm (2,05 in) Voice Coil Diameter 100 mm (4 in) Voice Coil Winding Material copper Suspension Triple roll, Polycotton Cone Straight ribbed, Paper   THIELE SMALL PARAMETERS  (6) Fs 28 Hz Re 5 Ohm Sd 0,1662 sq.mt. (257,6 sq.in.) Qms 9,32 Qes 0,242 Qts 0.235 Vas 385 lt. (13,6 cuft) Mms 296 gr. (0,65 lb) BL 33,5 Tm Linear Mathematical Xmax (7) ± 9,5 mm (± 0,37 in) Le (1kHz) 2,85 mH Ref. Efficiency 1W@1m (half space) 98,0 dB   MOUNTING INFORMATIONS Overall diameter 545 mm (21,46 in) N. of mounting holes 8 Mounting holes diameter 10 mm (0,39 in) Bolt circle diameter 520 mm (20,47 in Front mount baffle cutout ø 492 mm (19,37 in) Rear mount baffle cutout ø 490 mm (19,29 in) Total depth 256,3 mm (10,1 in) Flange and gasket thickness 14 mm (0,55 in) Net weight 19,2 kg (42,38 lb) Shipping weight 20,6 kg (45,47 lb) CardBoard Packaging dimensions 550 x 550 x 300 mm (21,65 x 21,65 x 11,8 in)   FREQUENCY RESPONSE CURVE OF 21LW1400 MADE ON 250 LIT. ENCLOSURE TUNED 28HZ IN FREE FIELD (4PI) ENVIRONMENT. ENCLOSURE CLOSES THE REAR OF THE DRIVER. THE THIN LINE REPRESENTS 45 DEG. OFF AXIS FREQUENCY RESPONSEFREE AIR IMPEDANCE MAGNITUDE CURVE


€ 467

Key features

  • 99 dB SPL 1W / 1m average sensitivity
  • 100 mm (4 in) Interleaved Sandwich Voice coil (ISV)
  • 1400W AES power handling
  • Double Silicon Spider (DSS) for improved excursion control and linearity
  • Double Demodulating Rings (DDR) for lower distortion
  • Improved heat dissipation via unique basket design
  • Weather protected cone and plates for outdoor usage
  • Suitable for ultra low frequency systems
Downloads
 Data sheet
 Drawing
21LW1400
 


Description
The 21LW1400 is a 21 inch high performance extended low frequency loudspeaker. The transducer can be used as a subwoofer component, in either a reflex, band-pass or horn-loaded configuration, in high power auditorium or arena loudspeaker systems. It provides clean and undistorted LF reproduction at very high SPL and enables the speaker to withstand high power levels without damage.
The 21LW1400 design features include an exceptional displacement suspension system which, in conjunction with a carbon fiber reinforced straight-ribbed cone and the Double Silicon Spider (DSS), produces an ultra-linear piston action, providing full control across the entire working range.
The 100mm inside outside copper voice coil, based on our Interleaved Sandwich Voice-coil (ISV) technology, reaches high levels of thermal stability and durability. ISV technology is based on a high strength fiberglas former with half the coil wound on the outside and half on the inside and bonded together using unique high temperature resin adhesives. This results in a balanced linear motor unit which can exert an exceptionally high force factor.
The low distortion and unmatched sound quality of the 21LW1400 has been significantly improved by the Double Demodulating Rings (DDR) embedded in the pole piece of the magnetic structure. These have been designed to dramatically reduce the intermodulation and harmonic distortion while improving transient response at the same time.
Excellent heat dissipation has been achieved using the special basket design which incorporates air channels between the basket and the magnetic top plate. In addition, 8 air vents incorporated into the back plate are aligned with the voice coil to force air into the lower part of the gap.
21LW1400 is ready to perform properly under inclement weather conditions. This has been achieved using of an exclusive treatment which improves pulp strength and gives water repellent properties to both sides of the cone. Moreover, a special treatment is applied to the top and back plate of the magnetic structure which is far more resistant to the corrosive effects of salts and oxidization than any other treatment in use.

 

GENERAL SPECIFICATIONS
Nominal Diameter 533 mm (21 in)
Rated Impedance 8 Ohm
AES Power 1400 W
Program Power (1) 1600 W
Peak Power (2) 7000 W
Sensitivity (3) 99 dB
Frequency Range (4) 24 - 2000 Hz
Power Compression @-10dB (5) 0,6 dB
Power Compression @-3dB 1,5 dB
Power Compression @Full Power 2,2 dB
Max Recomm. Frequency 250 Hz
Recomm. Enclosure Volume 120 ÷ 500 lt. (4,24 ÷ 17,7 cuft)
Minimum Impedance 6,4 Ohm at 25°C
Max Peak To Peak Excursion 52 mm (2,05 in)
Voice Coil Diameter 100 mm (4 in)
Voice Coil Winding Material copper
Suspension Triple roll, Polycotton
Cone Straight ribbed, Paper

 

THIELE SMALL PARAMETERS  (6)
Fs 28 Hz
Re 5 Ohm
Sd 0,1662 sq.mt. (257,6 sq.in.)
Qms 9,32
Qes 0,242
Qts 0.235
Vas 385 lt. (13,6 cuft)
Mms 296 gr. (0,65 lb)
BL 33,5 Tm
Linear Mathematical Xmax (7) ± 9,5 mm (± 0,37 in)
Le (1kHz) 2,85 mH
Ref. Efficiency 1W@1m (half space) 98,0 dB

 

MOUNTING INFORMATIONS
Overall diameter 545 mm (21,46 in)
N. of mounting holes 8
Mounting holes diameter 10 mm (0,39 in)
Bolt circle diameter 520 mm (20,47 in
Front mount baffle cutout ø 492 mm (19,37 in)
Rear mount baffle cutout ø 490 mm (19,29 in)
Total depth 256,3 mm (10,1 in)
Flange and gasket thickness 14 mm (0,55 in)
Net weight 19,2 kg (42,38 lb)
Shipping weight 20,6 kg (45,47 lb)
CardBoard Packaging dimensions 550 x 550 x 300 mm (21,65 x 21,65 x 11,8 in)

 

FREQUENCY RESPONSE CURVE OF 21LW1400 MADE ON 250 LIT. ENCLOSURE TUNED 28HZ IN FREE FIELD (4PI) ENVIRONMENT. ENCLOSURE CLOSES THE REAR OF THE DRIVER. THE THIN LINE REPRESENTS 45 DEG. OFF AXIS FREQUENCY RESPONSE
FREQUENCY RESPONSE CURVE OF 21LW1400 MADE ON 250 LIT. ENCLOSURE TUNED 28HZ IN FREE FIELD (4PI) ENVIRONMENT. ENCLOSURE CLOSES THE REAR OF THE DRIVER. THE THIN LINE REPRESENTS 45 DEG. OFF AXIS FREQUENCY RESPONSE

FREE AIR IMPEDANCE MAGNITUDE CURVE
FREE AIR IMPEDANCE MAGNITUDE CURVE



Nazad na kategoriju Ugradni Zvučnici / Delovi