Do besplatne dostave Vam je ostalo još 2.000,00 RSD
RSD
 
 
+
×

MARTIN AUDIO PSX - Pasivni vufer

Šifra: 10862
Na stanju
946.800,00 rsd
789.000,00 rsd (Bez PDV-a)
Iznos rate:
Prikazana cena je za komad.

Garantujemo najnižu cenu!

Količina

Ukoliko želite da platite na rate kreditnom karticom, molimo Vas da izaberete broj rata.

Važi za kreditne kartice logo_banka

Broj rata:

Dostupno u prodavnici:
  • Ugrinovački Put 10n, Zemun
  • Centralni magacin
Prijavi povoljniju cenu Obavesti me ako cena padne Postavi pitanje
Opcija:

The PSX is a companion self-powered subwoofer for the DD6, XD12 and XD15 full-range loudspeaker systems. Featuring a powerful 15" (380mm) /4" (100mm) voice coil, long-excursion driver in a very compact reflex-ported enclosure, it houses two channels of Class D amplification — one channel for itself and one channel to power an XD12, an XD15, or up to three DD6’s.

The PSX’s Class D amplifier section produces a total peak output of 2400W, with 1400W allocated to the 15" subwoofer and 1000W to drive the associated full-range system. Its lightweight, switched-mode power supply auto-ranges to global mains voltages from 100 to 240V 50/60Hz, and Power Factor Correction smoothes out the mains current draw over the whole of the AC waveform. The operating range of the PSX is 48Hz to 150Hz, with a peak SPL capability of 136dB at one metre.

Onboard DSP performs delay, crossover and EQ functions, while the PSX plus full-range system can be controlled and monitored from a laptop or wireless tablet PC via intuitive VU-NET™ proprietary software. PC connection can be made directly via micro USB, or via Martin Audio’s proprietary U-NET™ network and Merlin loudspeaker and network management system.

An important feature of the PSX is its internal memory, which allows factory ‘plug-and-play’ or user-generated DSP preset ‘snapshots’ of the PSX/full-range combination to be recalled by means of a preset selector button on the rear panel, instead of using computer control.

The PSX’s tour-grade plywood enclosure is coated in hard-wearing polyurethane and its Declon® backed steel grille is pre-curved to resist deformation in the field. Practical features include a pole-mount fitting in the top surface, bar handles and protective skids. When stacked, the skids on the base of the upper PSX enclosure align with recesses in the top of the enclosure below.

Options included a wheelboard for ease of transportation and a transit cover. For outdoor use, an optional rain cowl is available to protect the amplifier section from rain and direct sun.

Acoustical
TYPE
FREQUENCY RESPONSE (5) 

MAXIMUM SPL (3)

Compact, self-powered 15" reflex loaded subwoofer 
48Hz-150Hz ± 3dB
-10dB @ 40Hz
133dB continuous, 136dB peak
Driver 1 x 15" (380mm)/4" (100mm) voice coil, ultra-long
excursion, high efficiency ferrite magnet
Rated Power (2) 800W AES, 3200W peak
Dispersion Omnidirectional
Audio Input
CONNECTORS 
ANALOGUE INPUT IMPEDANCE 
MAXIMUM ANALOGUE INPUT LEVEL
AES/EBU IMPEDANCE

Female XLR input, male XLR link output
20kΩ balanced to ground
6.15Vrms (+18dBu), over voltage protected
110 ohms balanced, receive and transmit termination
Internal Processing







Multi-channel DSP, programmable via network
Up to 1 second of delay
Sub output: up to 48dB/Oct LPF
8 PEQ/shelving filters
Satellite output: up to 48dB/Oct HPF
8 PEQ/shelving filters 
Preset selection via rear panel switch
Network
CONNECTORS
PROTOCOL
PC CONNECTION

IP68 rated 8-way, quick-release type
U-NET
Micro USB or via U-NET and Merlin controller
Amplifier Module
TYPE
PEAK OUTPUT POWER


CONNECTOR
AVERAGE EFFICIENCY
COOLING

MAXIMUM AMBIENT TEMPERATURE

2 channel switched-mode, class D
2400W total
1400W PSX subwoofer
1000W full-range satellite system 
1 x NL4 output to satellite system
85%
Internal fan
Temperature controlled external fan
45°C (113°F) for full output
Power Supply
TYPE
AC INPUT OPERATING RANGE
AC OVERVOLTAGE TOLERANCE
POWER FACTOR
NOMINAL POWER CONSUMPTION
MAINS CONNECTOR

Switch mode, fixed frequency with PFC
100 – 240V ~ AC, 50 - 60Hz
400V AC
> 0.95
200W
Neutrik® Powercon True1
General
ENCLOSURE
FINISH
PROTECTIVE GRILLE
FITTINGS






Extensively braced multi-laminate birch-ply
Textured black PU coating
Black HEX perforated steel, Declon® backed
Two skids on base, with mating channels on top
M20 top-mounted thread plate for pole
Large bar handle on each side
Two front-mounted latch plates for wheelboard
Optional weather protection cowl
IP Rating


DIMENSIONS 



WEIGHT 


Indoor (without weather protection cowl)
IP 25 (with weather protection cowl)

(W) 500mm x (H) 565mm x (D) 574mm 
(674mm with vent flap open)
(W) 19.6in x (H) 22.2in x (D) 22.6in (26.6in)

48.2kg (106.2 lbs)
56.7kg (124.9 lbs) inc wheelboard
Accessories 





Variable height pole mount
Transit cover with integral plywood lid
Wheelboard with 4 x 100mm castors
Tour-grade network interconnects
Merlin Controller/U-NET Hub
Ocena:

Vezani artikli


Srodni proizvodi