ADAM AUDIO T7V
The single, Adam Professional Audio T-Series T7V is an affordable, high-quality, near-field, active studio monitor well suited for project studios, commercial recording facilities, and broadcast environments. The speaker features Adam's U-Art 1.9" accelerated ribbon tweeter with HPS waveguide and a 7" polypropylene woofer with a rear-firing bass-reflex port. The unit is bi-amped with 50W allocated to the woofer, while 20W powers the tweeter, which combine to provide a frequency response of 39 Hz to 25 kHz and a maximum SPL of 110 dB. The rear panel offers XLR and RCA connections with controls for input sensitivity, gain, high-shelf (-2, 0, +2 dB), and low-shelf (-2, 0, +2 dB). The Adam Professional Audio T7V ships with a power cord.
U-ART 1.9" Accelerated Ribbon Tweeter
Allows longer operation with fewer signs of fatigue
Breakup is prevented by the folded diaphragms, distortions are effectively reduced to a minimum
Advanced dynamic range due to acoustically effective diaphragm surface that is 2.5 times bigger (compared to a classic tweeter according to the piston principle)
Air velocity ratio of 4:1 during the sound generation by folded U-ART membrane
Direct, fast response in the high-range even with complex transients
HPS waveguide from the S Series
Makes dispersion more consistent and imaging more stable over a wider area
Reduction of early reflections on the surfaces of mixing consoles, desks, and more
Lightweight polypropylene construction of the woofer
Excellent transient response even at high sound levels without breakup of the diaphragm
Vertical 2-way system with 7" woofer
High resolution of the stereo image
Rear-firing bass reflex port
Bass reproduction with very low compression
Linear frequency response of 39 Hz to 25 kHz
Unbiased reproduction in a wide frequency band
Maximum peak sound pressure per pair in 3.3' (1 m) 110 dB
Powerful, compression-free sound reproduction even at very high sound levels
DSP-powered crossover design
Smooth frequency response without interference between the drivers in the critical midrange
Simple room acoustic adjustments via high- and low-shelf filters
Allows optimal adaptation to acoustically difficult listening environments or individual preferences
Analog inputs over XLR and RCA
Optimized for balanced and unbalanced line signals
Acoustically optimized cabinet geometry
Reduction of unwanted reflections on the cabinets
Adam Professional Audio T7V Specs
Studio Monitor
Monitor Type Active 2-Way
Enclosure Bass-Reflex, Shielded
Power Rating 70 W
Drivers LF Driver: 1 x 7" / 17.8 cm Polypropylene Woofer
HF Driver: 1 x 4" / 10.2 cm Air Motion Transformer
Amplification 1 x LF Amplifier: Class-D Rated at 50 W
1 x HF Amplifier: Class-D Rated at 20 W
Performance
Frequency Range 39 Hz to 25 kHz
Maximum Sound Pressure Level (SPL) 110 dB (Peak)
Total Harmonic Distortion (THD) 0.5%
Signal Processing
EQ 1 x HF Shelf
1 x LF Shelf
Parametric EQ None
Crossover
Crossover Frequency 2.6 kHz
Connectivity
Audio I/O 1 x XLR Balanced Female Analog Input
1 x RCA Unbalanced Female Analog Input
Power
AC Input Power 100 to 240 VAC, 50/60 Hz
Power Consumption 132 W
General
Mounting Points None
Dimensions (W x H x D) 8.3 x 13.7 x 11.5" / 21.1 x 34.8 x 29.2 cm
Weight 15.7 lb / 7.1 kg
Packaging Info
Package Weight 18.45 lb
Box Dimensions (LxWxH) 18.1 x 15.3 x 11.6"
