Introduce：15 inch Loudspeaker1- Model: HPLX 152- Rated Impedance: 8Ω4- Power Handling: 300 W5- Voice Coil Diameter: 75.5mm / 3 inch6- Magnet:Φ190mm Ferrite Ring

Introduce：12 inch Loudspeaker1- Model: HPLX 122- Rate Impedance: 8Ω3- Power Handling: 300 W4- Voice Coil Diameter: 73mm / 3 inch5- Magnet:Φ190mm Ferrite Ring

Size:6 inch Rate Impedance: 8ΩRate Power:150W Voice coil:38mm/1.5 inch Magnet:120mm fequency range.120-12KHz

Introduce：10 inch Loudspeaker1- Model: HPLX 102- Rate Impedance: 8Ω3- Power Handling: 300 W4- Voice Coil Diameter: 65mm / 2.6 inch5- Magnet:Φ156mm Ferrite Ring

Size:8 inch Rate Impedance: 8ΩRate Power:200W Voice coil:51mm/2 inch Magnet:140mm fequency range.64.5-5.2KHz

18 Sound 18W2001 8ohm 18" 1200watt High Output LF Ferrite Driver 99 dB SPL 1W / 1m average sensitivity100 mm (4 in) Interleaved Sandwich ISV copper voice coil1200 W AES power handlingDouble Silicon Spider (DSS) for improved exc...

The 18LW2400 is an 18 inch extended low frequency loudspeaker designed for high SPL subwoofer applications in either a reflex, bandpass or horn loaded configuration. Compared to our industry standard 18LW1400, the 18LW2400 provides higher maximum SPL, increased program power handling and lower po...

The 15MB700 very high output mid-bass transducer shows exceptional efficiency and is primarily intended for 2-way very compact reflex systems (75 lt.), 3-way systems and horn loaded applications. It combines high sensitivity (103 dB 1W/1m) with a high power handling capability. The smooth text...

The HD1040 one inch exit high frequency compression driver has been designed for use in high quality audio systems.Equipped with proprietary Phase Plug architecture, the HD1040 has been designed to give high level manufacturing consistency and smooth coherent wave front at the horn entrance ac...

MEGA AKCIJA !!! OGRANICENE KOLICINE DOK TRAJE LAGER SAMO ! The 12W500 is a 500W program low frequency driver designed to satisfy the need for a 12" loudspeaker which combines excellent linearity with good sensitivity and power handling characteristics. It is primarily intended for compact bass...

The 0818MR is a high sensitivity, midrange loudspeaker designed for use in large 3-way systems. Its closed-back chassis simplifies cabinet manufacture, eliminating the need for a separate midrange enclosure.Celestion Truvox 0818MR 8" Raw Frame Speaker Features:

The 12W700 meets the specific market requirement for a loudspeaker which combines the excellent linearity, good efficiency and high power handling of the 15W700 model but in a 12 inch (300mm) chassis for use in more compact systems. It is primarily intended for application in compact reflex an...

12" Bass and mid-range driver providing 97dB sensitivity and 250Wrms    Frequency Response and Impedance Curves

The 15MB650 high output mid bass has been designed for use as a bass and low-midrange driver in tuned reflex enclosures, in 2- or 3-way systems. When used in a 2-way system, we recommend a 1" or 2" exit compression driver to obtain the best sound quality and directional control. The 15MB650 co...

2,200Hz recommended min. crossover freq (12dB/oct)Single piece PETP diaphragm and surround

The 6ND410 is a very high output, state-of-the-art midrange product for high quality professional use. The high level of sound quality has been achieved thanks to extensive research by Eighteen Sound engineers which focused on implementing mid frequencies intelligibility. The 6ND410 can be use...

GENERAL SPECIFICATIONSThroat Diameter 35,5 mm (1,4 in)Horizontal Coverage (-6dB) 100° nominalVertical Coverage (-6 dB) 10° nominalUsable Frequency Range Above 800 HzSensitivity (on axis) 111 dBFrequency Range 500 Hz ÷ 18KHzMaterial Die-c...

The 12W750 meets the specific market requirement for a loudspeaker which combines the excellent linearity, good efficiency and high power handling of the 15W750 model but in a 12 inch (300mm) chassis for use in more compact systems. It is primarily intended for application in compact reflex an...

15-inch pressed steel chassis, ferrite magnet bass/mid driver

Eighteen Sound Recone Kit for 18LW1400 8Ohm. This is what you need to repair a blown driver. You will need appropriate adhesives and product knowledge in order to fit this replacement part correctly. We do not provide a consultancy service or fitting advice for this product - this is a replacemen...