18 Sound 18W2001 8ohm 18" 1200watt High Output LF Ferrite Driver 99 dB SPL 1W / 1m average sensitivity100 mm (4 in) Interleaved Sandwich ISV copper voice coil1200 W AES power handlingDouble Silicon Spider (DSS) for improved exc...

The 8M400F is a high power, high output, 200 mm (8 in) midrange for high level professional use.

The 18LW2400 is an 18 inch extended low frequency loudspeaker designed for high SPL subwoofer applications in either a reflex, bandpass or horn loaded configuration. Compared to our industry standard 18LW1400, the 18LW2400 provides higher maximum SPL, increased program power handling and lower po...

18” Ferrite Chassis Driver

Featuring the unique Eighteen Sound elliptical shape (ESS technology), the XT1086 Constant Coverage High Frequency Horn has been designed for use in sound systems where the highest sound quality is required. With a 1 inch throat entry, the XT1086 has been designed to match the Eighteen Sound 1...

Extended LF Neodymium Transducer

The 15MB700 very high output mid-bass transducer shows exceptional efficiency and is primarily intended for 2-way very compact reflex systems (75 lt.), 3-way systems and horn loaded applications. It combines high sensitivity (103 dB 1W/1m) with a high power handling capability. The smooth text...

The 6ND430 is a 6 inch neodymium woofer designed for low frequency reproduction in 2-way systems or multiway systems where both low weight and high intelligibility are required. The speaker has been specifically designed for compact...

GENERAL SPECIFICATIONSThroat Diameter 35,5 mm (1,4 in)Horizontal Coverage (-6dB) 100° nominalVertical Coverage (-6 dB) 10° nominalUsable Frequency Range Above 800 HzSensitivity (on axis) 111 dBFrequency Range 500 Hz ÷ 18KHzMaterial Die-c...

The 15W500 is a fine example of a high quality transducer providing the right balance between performance and engineering costs. This ferrite low frequency driver satisfies the demand for a 15" loudspeaker which combines excellent linearity with good sensitivity and power handling characterist...

The HD125 1 inch exit HF unit has been designed as the natural evolution of the industry standard HD120 compression driver. It delivers an unmatched combination of extended linear frequency response and very high efficiency.

The HD1030 1 inch exit high frequency compression driver has been designed for use in two-way audio systems.The transducer exhibits a constant slope response from 1.5kHz to 18kHz with a uniform and smooth roll-off. With a 800 Hz free air resonance frequency, the HD1030 can easily be cut-off at...

Eighteen Sound Recone Kit for 6ND410 8Ohm. This is what you need to repair a blown driver. You will need appropriate adhesives and product knowledge in order to fit this replacement part correctly. We do not provide a consultancy service or fitting advice for this product - this is a replacement ...

Description The 6ND430 is a 6 inch neodymium woofer designed for low frequency reproduction in 2-way systems or multiway systems where both low weight and high intelligibility are required. The speaker has been specifically designed for compact reflex enclosures where high quality low-bass and...

The XD110 is a HF unit suitable for compact size two and three way lightweight systems. XD110 with its Elliptical Constant Directivity Horn is designed for linear and extended response over a wide frequency range (1.5kHz to 18kHz). The phenolic diaphragm assembly with its 1 inch voice coil is ...

Eighteen Sound Recone Kit for 18LW1400 8Ohm. This is what you need to repair a blown driver. You will need appropriate adhesives and product knowledge in order to fit this replacement part correctly. We do not provide a consultancy service or fitting advice for this product - this is a replacemen...

The 15MB650 high output mid bass has been designed for use as a bass and low-midrange driver in tuned reflex enclosures, in 2- or 3-way systems. When used in a 2-way system, we recommend a 1" or 2" exit compression driver to obtain the best sound quality and directional control. The 15MB650 co...

The 15LW2400 has been developed as an evolution of the 15LW1401 low frequency transducer, setting a new industry standard in 15" (380 mm) ferrite high performance transducers. The speaker has been designed for use as a low bass or sub-woofer component in a compact cabinet (60 - 130 lt) reflex ...

MEGA AKCIJA !!! OGRANICENE KOLICINE DOK TRAJE LAGER SAMO ! The 12W500 is a 500W program low frequency driver designed to satisfy the need for a 12" loudspeaker which combines excellent linearity with good sensitivity and power handling characteristics. It is primarily intended for compact bass...

The 15W930 low frequency transducer meets the specific market demand for a ceramic version of our industry standard 15ND930 extended low frequency transducer with 75 mm Ø copper edge wound voice coil. Thanks to its versatility, the 15W930 can be used in 2-way compact reflex enclosures w...