8 Ohm

Navoj 34mm Impedansa: 8 Ohm

8 Ohm

Voice Coil 1"(25MM) Ti. Diap. DriverMagnet 7.8 oz (70x32x15)Impedance 6 OhmFrequency Response 1.5KHZ-18KHZPower 30 W

8 Ohm

8 Ohm

.

Piezo Tweeter 187x80mm

Piezo Tweeter 85x85mm

Voice Coil 1"(25MM) Ti. Diap. DriverMagnet 7.8 oz (70x32x15)Impedance 8 OhmFrequency Response 1.5KHZ-18KHZPower 30 W

Navoj 34mm Impedansa: 8 Ohm

Introduce：34mm HF Speaker1- Model: HDLX 342- Throat Diameter:25mm/1inch 3- Rated Impedance: 8Ω4- Power Handling: 30 W5- Voice Coil Diameter: 34mm / 1.3 inch4- Magnet: Ferrite Ring

GENERAL SPECIFICATIONSThroat Diameter 35,5 mm (1,4 in)Horizontal Coverage (-6dB) 100° nominalVertical Coverage (-6 dB) 10° nominalUsable Frequency Range Above 800 HzSensitivity (on axis) 111 dBFrequency Range 500 Hz ÷ 18KHzMaterial Die-c...

The HD125 1 inch exit HF unit has been designed as the natural evolution of the industry standard HD120 compression driver. It delivers an unmatched combination of extended linear frequency response and very high efficiency.

The XD110 is a HF unit suitable for compact size two and three way lightweight systems. XD110 with its Elliptical Constant Directivity Horn is designed for linear and extended response over a wide frequency range (1.5kHz to 18kHz). The phenolic diaphragm assembly with its 1 inch voice coil is ...

2,200Hz recommended min. crossover freq (12dB/oct)Single piece PETP diaphragm and surround

The HD1030 1 inch exit high frequency compression driver has been designed for use in two-way audio systems.The transducer exhibits a constant slope response from 1.5kHz to 18kHz with a uniform and smooth roll-off. With a 800 Hz free air resonance frequency, the HD1030 can easily be cut-off at...

1" exit, ferrite magnet compression driver with 1.75" edgewound copper clad aluminium voice coi

The HD110 is a HF unit suitable for compact size two and three way lightweight systems. It will deliver an unmatched combination of extended linear frequency response and very high efficiency. With a throat exit of 1 inch, the HD110 is developed to match all 1-3/8” screw-in type horns.

The XD125 has been designed for 2 way or 3 way systems. It will deliver an unmatched combination of extended linear frequency response and very high efficiency. The major advancement in XD125 compression driver consists in a new innovative diaphragm assembly made in proprietary treated polyeth...