CORDIAL´s passive DI box CES 01 allows you to easily connect line level outputs or speaker outputs to balanced mixing desk inputs with microphone level sensitivity.  Ground lift function and 30 dB attenuation can be activated  using large-scale toggle switches. The CES 01 doesn...

The Dual RDB from ART is a dual re-amping direct box that is an ideal solution for any application where stereo or dual line level signals from recording interfaces, computers, mixers, iPods, consumer audio or video machines need to be conn...

TONEX Capture is an all-in-one accessory that makes it easy to capture your real amp’s tone perfectly, with or without microphones. It’s the ideal way to tone model your gear using the TONEX software, but also the perfectreamplification device.

In line with the latest trend, i.e. keyboards, samplers and effects units with stereo outputs, CORDIAL´s passive DI-box CES 02 allows you to easily connect line level outputs to balanced mixing desk inputs with microphone level sensitivity. Another convenient feature  is also the op...

The ART DUALXDirect is a 2-channel, active direct box. It converts instrument-, line-, or speaker-level sources into isolated, balanced, low-impedance signals for connection to mixers, audio interfaces, and other devices with balanced inputs. The DUALXDirect can hand...

  Bluetooth® Direct Box The BT-DI lets you connect Bluetooth® audio to a mixer, PA system, or audio interface. It’s a rugged unit with simple controls. Hold the Bluetooth button to pair or disconnect a device. A front panel switch sel...

The ART PDB4- Rackmountable 4-Channel Passive Direct Box is designed for studio and live performance applications. The 1RU 19" rackmountable passive device features four fully transformer isolated direct boxes with inputs and outputs isolated from one another to maxi...

The T8 (Transformer Eight) from ART is a high quality, totally passive audio interface, housed in a rack mount chassis, that uses eight transformers to separate input and output signal grounds, thereby isolating any two systems and reducing...

The CleanBox II from ART is an inexpensive passive, in-line device that basically eliminates the 60Hz hum caused by ground loops. It is designed for use with guitar amps, effects processors and keyboards before reaching the input st...

  Balanced / Unbalanced Level Convertor The CleanBox Pro is a convenient solution for connecting consumer A/V and professional audio equipment. It provides two channels of unbalanced-to-balanced level conversion, and two channels of balanced-to-unb...

Fully passive, high performance transformer design. No battery required. Converts 50k ohm inputs into 600 ohm balanced outputs Switchable input attenuation (0, -20, -40 dB) Switchable low pass filter Switchable phase invert Switchable ground lift ...

The Zdirect is a high quality totally passive interface that lets you connect instrument, line, or speaker level signals to a mixer or other balanced input thru a high performance audio isolation transformer. The high impedance single-ended 1/4" input is converted by the transformer into an isola...

The APart BUZZSTOP-MKIII is a universal input adaptor that can be used for all connections and extensions. The input level selector allows you to convert any amplifier output to any line-level output, balanced or unbalanced. (E.g.: You can convert a 100V loudspeaker signal into a balanced or u...

The PDB passive direct box from ART is a roadworthy DI for connection of the outputs of electronic musical instruments (or other audio sources) to the balanced inputs of mixer consoles and other balanced inputs. It also allows for connectio...

The dPDB passive direct box from ART features two high-quality direct boxes in one portable enclosure. It is a roadworthy DI for connection of the outputs of electronic musical instruments (or other audio sources) to the balanced inputs of ...

Phantom II Pro – Dual Ch. Phantom Power SupplyThe Phantom II Pro is designed to do one thing and do it well. It provides clean, reliable phantom power for one or two condenser microphones in a rugged, compact, and portable unit. Innovative low power circuitry generates the higher v...

The Xdirect is a high quality interface that lets you connect instrument, line, or speaker level signals to a mixer or other balanced input. The high impedance single-ended 1/4" and XLR inputs are buffered and converted, by very low noise active electronics, into an isolated balanced low impedanc...

The condenser miniature microphones, for example, PRA383, E308,PRA30,and WU518, need phantom power to work. The PS418D is just what they need. It can be powered by phantom power or battery, and switchable low cut filter helps to reduce low band noise.

  Cable Tester Whether you have a few or a mountain of cables, it pays to know which ones are good and which ones need to be tossed into the not so good pile. The MTEST-1 is an incredibly handy tool that can weed out the cables that may have seen t...

PRO 248 is a dual channel active DI specially developed by UNiKA for electric guitar and electric bass. It is equipped with a 260KΩ over-impedance input terminal and a special isolation transformer, which can provide very rich harmonic and overtones for musical instruments.