The 6NMB420 is a 44mm voice coil 6.5 inch neodymium midbass transducer designed for mid low frequency reproduction in system designs where high intelligibility is required.

GENERAL SPECIFICATIONSThroat Diameter 35,5 mm (1,4 in)Horizontal Coverage (-6dB) 100° nominalVertical Coverage (-6 dB) 10° nominalUsable Frequency Range Above 800 HzSensitivity (on axis) 111 dBFrequency Range 500 Hz ÷ 18KHzMaterial Die-c...

Best performance to price 1.4” exit driver on themarket 108 dB 1W/ 1maverage sensitivity 1.4 inch throat exit 2.4 inch edgewound aluminumvoice coil 140Wprogrampower handling Pure Titaniumdiaphragmassembly Proprietary phase plug design HFcoppersleeve forreduced distortion and increased ou...

The HD1030 1 inch exit high frequency compression driver has been designed for use in two-way audio systems.The transducer exhibits a constant slope response from 1.5kHz to 18kHz with a uniform and smooth roll-off. With a 800 Hz free air resonance frequency, the HD1030 can easily be cut-off at...

Extended LF Neodymium Transducer

The 18NLW9400 is a 18" (460 mm) extended low frequency loudspeaker, designed for use as a low bass or subwoofer component, in vented or bandpass configuration.

Eighteen Sound products are the result of extensive research, exclusive technologies and stringent Production Quality Control.Our integrated manual/automated, manufacturing lines allow us to reach the highest levels of accuracy and repeatability.

The 12MB600 is a high sensitivity (101dB 1W/1m) midbass driver with high power handling capabilities. It can be used as either a bass/mid driver in compact 2-way reflex enclosures or as a direct radiating or horn loaded, dedicated midrange driver, in multi-way touring and fixed installation co...

The 12W750 meets the specific market requirement for a loudspeaker which combines the excellent linearity, good efficiency and high power handling of the 15W750 model but in a 12 inch (300mm) chassis for use in more compact systems. It is primarily intended for application in compact reflex an...

Extended LF Ferrite Driver 8 Ohm

The 15LW2400 has been developed as an evolution of the 15LW1401 low frequency transducer, setting a new industry standard in 15" (380 mm) ferrite high performance transducers. The speaker has been designed for use as a low bass or sub-woofer component in a compact cabinet (60 - 130 lt) reflex ...

The 15MB606 high output mid bass has been designed for use as a bass and low-midrange driver in tuned reflex enclosures, in 2-way systems. It combines high sensitivity (101dB 1W/1m) with high power handling capability. The smooth textured curvilinear paper cone, in conjunction with the viscose...

The 15MB700 very high output mid-bass transducer shows exceptional efficiency and is primarily intended for 2-way very compact reflex systems (75 lt.), 3-way systems and horn loaded applications. It combines high sensitivity (103 dB 1W/1m) with a high power handling capability. The smooth text...

LF Ferrite Driver 8 Ohm99 dB SPL 1W / 1m average sensitivity 75 mm (3 in) Interleaved Sandwich Voice coil (ISV) 450 W AES power handling Weather protected cone and plates for outdoor usage Excellent transient response Improved heat dissipation via uniq...

The 15W930 low frequency transducer meets the specific market demand for a ceramic version of our industry standard 15ND930 extended low frequency transducer with 75 mm Ø copper edge wound voice coil. Thanks to its versatility, the 15W930 can be used in 2-way compact reflex enclosures w...

18” Ferrite Chassis Driver

Eighteen Sound 18TLW3000, 8ohm3600 W program power handling100 mm (4 in) Tetracoil dual voice coil, equivalent to a single coil diameter larger than 152 mm (> 6 in)Ultra linear suspension behavior for excellent sound claritySymmetric flux density and inductance behaviourLo...

99 dB SPL 1W / 1m average sensitivity100 mm (4 in) Interleaved Sandwich Voice coil (ISV)1400W AES power handlingDouble Silicon Spider (DSS) for improved excursion control and linearityDouble Demodulating Rings (DDR) for lower distortionImproved heat dissipation vi...

Description The 6ND430 is a 6 inch neodymium woofer designed for low frequency reproduction in 2-way systems or multiway systems where both low weight and high intelligibility are required. The speaker has been specifically designed for compact reflex enclosures where high quality low-bass and...

Eighteen Sound Recone Kit for 18LW1400 8Ohm. This is what you need to repair a blown driver. You will need appropriate adhesives and product knowledge in order to fit this replacement part correctly. We do not provide a consultancy service or fitting advice for this product - this is a replacemen...