This1400 watt 8ohm recone kit voice coil is made from hi temp copper and is resin coated to resist coil slipping .The long throw ribbed cone is same as original with 75% tin thinsel leads to resist breaking.

The HD1030 1 inch exit high frequency compression driver has been designed for use in two-way audio systems.The transducer exhibits a constant slope response from 1.5kHz to 18kHz with a uniform and smooth roll-off. With a 800 Hz free air resonance frequency, the HD1030 can easily be cut-off at...

Description The NSD1424BTN 1.4” exit neodymium high frequency compression driver has been designed for high level sound systems application.This new HF unit uses our proprietary True Piston Motion - TPM - technology, based on a thin film nitride coating deposit over the titanium diaphrag...

1" exit lightweight, low-profile ferrite magnet compression driver with 1" copper clad aluminium voice coil

Celestion CDX1-1445 Ferrite 1" Compression Driver 20WCelestion's compact and versatile CDX1-1445 1" high frequency driver is the result of the company's extensive experience, and its commitment to rigorous technical analysis. The driver's advanced non-metallic PETP diaphragm provid...

Compact, high flux, Dual Magnet Motor designVented cast aluminium heatsinkFrequency Response and Impedance Curves Product Graph Tested for two hours using a continuous, band-limited pink noise signal as per AES standard. Power calculated on minimum imp...

The Eminence assortment of horns has been engineered to provide the perfect compliment to Eminence HF drivers. Each horn is manufactured from the highest quality materials to obtain a balance of strength, durability, and weight savings.

Each Eminence Professional model can be identified by its cast aluminum Eminence chassis that is lightweight and strong. Aluminum does not conduct the magnetic field out of the gap, thereby making the motor strength higher and the stray magnetic field lower. We coat each chassis and all metal com...

PSD 51T Compression driver 8 Ohm, 60W / 120WPower Rating 60W (Specification, 1.6kHz 18dB)Nominal Impedance* 8 OhmThroat Size 1\", 25.4mmUsable Frequency Range 1.2kHz - 20kHzRecommended Crossover 1.2kHz/18dB or 1.8kHz/12dBSensitivity (1W 1m on axis...

Avantone AV10 MLF Low Frequency Drop-in Replacement Driver for Avantone CLA-10 & Yamaha™ NS10M™ Studio Monitors Already own the original “White Cone”? Avantone can keep them running for years. Since Yamaha® discontinued the iconic NS10M, the supp...

Avantone AV10 MHF High Frequency Drop-in Replacement Tweeter for Avantone CLA-10 & Yamaha™ NS10M™ Studio Monitors Already own the original “White Cone”? Avantone can keep them running for years. Since Yamaha® discontinued the iconic NS10M, the su...

The NSD1095N 1 inch exit neodymium compression driver has been designed for situations where the highest quality is required. Equipped with proprietary phase plug architecture, the NSD1095N has been designed to give a smooth coherent wavefront at the horn entrance across the whole working freq...

The 18W2001 is the updated version of the classic 18W2000, a low frequency subwoofer which sets a benchmark in 18" (460 mm) high output transducers. Showing 20% higher power handling and 10% lower weight, it represents a significative development of the acclaimed 18W1000 model. The 18W2001 can...

The 10W500 is a low frequency driver designed to satisfy the need for a 10" ferrite loudspeaker combining excellent linearity with good sensitivity and power handling characteristics. The transducer is the evolution of the 10W400, and is primarily recommended for compact bass reflex systems in...

95 dB SPL 1W / 1m average sensitivity51mm (2 in) Interleaved Sandwich Voice coil (ISV)280 W AES power handlingExternal neodymium magnet assemblySingle Demodulating Ring (SDR) for lower distortionWeather protected cone and plates for outdoor usageSuitable for...

Eminence PXB 33K5Designed to work in high-power cabinets, px crossovers are technically superior passive filters available as board-only or complete with fitted hardware for a smart, economical 'factory-fit' finish. Designed and built for Eminence, px crossovers feature

12" full-range speaker, 75-18000 Hz transmission range, 93 dB sensitive sou...