Two-way built-in loudspeaker,Paintable thin edge grille,High-quality 70/100 volt transformer

The Stage 260C has a 6.5" (165mm) Polycellulose cone woofer and 1" (25mm) Aluminum dome tweeter with an acoustic lens waveguide. A visually discrete zero bezel grille and easy installation allow these speakers to be heard and not seen. Elements including baffles with acoustic smoothing...

4" dual cone loudspeaker with back can

The ADORN A55 is a two-way passive speaker with an elegant design that is perfect for architectural environments that require high-fidelity sound f...

The EN-SMS6MT6-W is a surface mounted speaker made of powder coated steel (RAL 9010 equivalent), equipped with a high efficiency full range speaker and a multi tap 100-volt transformer, all certified according EN 54-24.

The CDD8 is an ultra-compact two-way passive loudspeaker system with an integrated 8” (200mm) LF/1” (25mm) exit HF Coaxial Differential Dispersion driver which can be easily rotated for horizontal or vertical orientation depending on venue design requirements. Its small size gives ...

CMR BBIMaterial: Injected plastic Dimensions (H x W x D) : 214 x 150 x 85 mm Weight : 0.4 KgCMRBBI is used to built-in every rectangular APart CMR-loudspeaker (CMR608 / CMR5 / CMR20T) into concrete or brick walls. The built-in box has special grooves to guar...

A55Ultra-Compact Two-Way On-Wall System The ADORN A55 is a two-way passive speaker with an elegant design that is perfect for archite...

A40Ultra-Compact Two-Way On-Wall System The ADORN A40 is a two-way passive speaker with an elegant design that is perfect for archite...

The CMAR8-W is a chlorine and salt water proof two-way 8" loudspeaker. This marine speaker has been designed especially to offer superb sound and efficiency even in the most difficult, humid and hot conditions.The fully plastic housing and stainless steel grille of the CMAR8-W loudspeake...

The CMAR5T marine speaker brings high-quality sound even in the most humid places.  The CMART Marine Series has 3 different models in 5” (CMAR5T-W), 6” (CMAR6T-W) and 8” (CMAR8T-W). These loudspeakers are especially developed to be installed in humid or hot (up t...

The ADORN A40 is a two-way passive speaker with an elegant design that is perfect for architectural environments that require high-fidelity sound f...

20w 2 WAY BASS REFLEX SPEAKER UNITPROJECT 320 3.5" Woofer and 0.5" Tweeter passive installation speakers feature a fully adjustable support bracket for easy installation. Connection is via a Euroblock connector - 8 Ohm 8 ohm and 100V line - Recommenced Amplifier: 40W RMS...

MASK6C-W6.5" design two-way loudspeaker white with Clickmount system

OVO5T is design two-way 100 volt or low impedance cabinet loudspeaker that can be used for background music and paging purposes both indoor and (covered) outdoor. This speaker produces 80 watts @ 16 ohms or when used in 100 volt you can select 30 – 15 – 6 – 3 watts with the e...

he APart CMS20T 2-way square built-in loudspeaker is loved by every interior designer for its beautifull shape and perfect sound quality. It can be used as a 16 Ohm or 100 Volt loudspeaker. In 16 Ohm use, you can connect up to 4 loudspeakers in parallel on each channel of a standard 4 Ohm ampl...

The H30LT is a powerfull industrial horn loudspeaker with compression driver. This hornspeaker offers you a high sound pressure for speech and the reproduction of alarm signals. Ideal for long-distance and outdoor use. The H30LT is made out of high impact ABS ; supplied with a stainless steal ...

Technical data UAE 16600 Load rating 600 W Nominal...