The JBL B-8IC is a 2-way in-ceiling loudspeaker with a 0.5-inch polymer tweeter and an 8-inch Poly cone woofer. A zero-bezel magnetically attached grille allows the loudspeaker to blend into any décor for a clean, modern design. The B Series models are easy to install and provid...

UIW RCS III Reference In-Ceiling LoudspeakerLoudspeaker AudioFrom Above

165mm ceiling speaker The JBL B-6IC is a 2-way ceiling speaker with a 13mm polymer tweeter and a 165mm polypropylene cone woofer. A magnetically attached, borderless cover allows the speaker to be integrated into any decor for a clean, modern design. B-Series mo...

2-way 8in (203mm) In-Ceiling Loudspeaker

The Stage 260C has a 6.5" (165mm) Polycellulose cone woofer and 1" (25mm) Aluminum dome tweeter with an acoustic lens waveguide. A visually discrete zero bezel grille and easy installation allow these speakers to be heard and not seen. Elements including baffles with acoustic smoothing...

18 Sound 18W2001 8ohm 18" 1200watt High Output LF Ferrite Driver 99 dB SPL 1W / 1m average sensitivity100 mm (4 in) Interleaved Sandwich ISV copper voice coil1200 W AES power handlingDouble Silicon Spider (DSS) for improved exc...

18” Ferrite Chassis Driver

Eighteen Sound Recone Kit for 6ND410 8Ohm. This is what you need to repair a blown driver. You will need appropriate adhesives and product knowledge in order to fit this replacement part correctly. We do not provide a consultancy service or fitting advice for this product - this is a replacement ...

Multi-purpose 5" speaker drive unit delivering clear bass and mid frequencies.

Featuring the unique Eighteen Sound elliptical shape (ESS technology), the XT1086 Constant Coverage High Frequency Horn has been designed for use in sound systems where the highest sound quality is required. With a 1 inch throat entry, the XT1086 has been designed to match the Eighteen Sound 1...

Extended LF Neodymium Transducer

The 15LW2400 has been developed as an evolution of the 15LW1401 low frequency transducer, setting a new industry standard in 15" (380 mm) ferrite high performance transducers. The speaker has been designed for use as a low bass or sub-woofer component in a compact cabinet (60 - 130 lt) reflex ...

The 18LW2400 is an 18 inch extended low frequency loudspeaker designed for high SPL subwoofer applications in either a reflex, bandpass or horn loaded configuration. Compared to our industry standard 18LW1400, the 18LW2400 provides higher maximum SPL, increased program power handling and lower po...

GENERAL SPECIFICATIONSThroat Diameter 35,5 mm (1,4 in)Horizontal Coverage (-6dB) 100° nominalVertical Coverage (-6 dB) 10° nominalUsable Frequency Range Above 800 HzSensitivity (on axis) 111 dBFrequency Range 500 Hz ÷ 18KHzMaterial Die-c...

12" mid/bass driver with extended low frequency response   Frequency Response and Impedance Curves

The 0818MR is a high sensitivity, midrange loudspeaker designed for use in large 3-way systems. Its closed-back chassis simplifies cabinet manufacture, eliminating the need for a separate midrange enclosure.Celestion Truvox 0818MR 8" Raw Frame Speaker Features:

2,200Hz recommended min. crossover freq (12dB/oct)Single piece PETP diaphragm and surround

The HD1030 1 inch exit high frequency compression driver has been designed for use in two-way audio systems.The transducer exhibits a constant slope response from 1.5kHz to 18kHz with a uniform and smooth roll-off. With a 800 Hz free air resonance frequency, the HD1030 can easily be cut-off at...

Eighteen Sound Recone Kit for 18LW1400 8Ohm. This is what you need to repair a blown driver. You will need appropriate adhesives and product knowledge in order to fit this replacement part correctly. We do not provide a consultancy service or fitting advice for this product - this is a replacemen...

12" Bass and mid-range driver providing 97dB sensitivity and 250Wrms    Frequency Response and Impedance Curves