MARTIN AUDIO CDD-LIVE15B
Garantujemo najnižu cenu na tržištu!
U slučaju da pronadjete isti proizvod po povoljnijoj ceni,
molimo Vas da nas kontaktirate na:
Martin Audio CDD-LIVE 15
The loudspeaker shall be a self-powered two-way system ultilising Coaxial Differential Dispersion technology. Its transducers shall consist of a reflex-loaded 15” low frequency driver and a coaxially-mounted 1.4” exit high frequency compression driver loaded by a static waveguide that merges with moving waveguides added to the cone of the low frequency driver to define the HF horn geometry.
The coaxial driver shall be user-rotatable to enable vertical or horizontal operation as required by the application. Horizontal dispersion shall vary from 100° to 60° and vertical dispersion shall be 60°. The on-axis frequency response shall be 55Hz-20kHz +/- 3dB and the loudspeaker shall produce a maximum SPL of 132dB peak at 1 metre.
The loudspeaker shall incorporate a two-channel Class D amplifier module which shall deliver a total of 2500W peak output to the transducers and include onboard DSP and networking capabilities for remote control and monitoring. The loudspeaker shall be Dante™ enabled for Audio over IP. Its power supply shall employ Power Factor Correction and operate from 100-240V, 50-60Hz AC.
Audio connectors shall be male and female XLR type and the AC power connector shall be a Neutrik® Powercon True1. Network connectors shall be Neutrik® Ethercon RJ45 type.
The loudspeaker enclosure shall be constructed from multi-laminate plywood with a textured polyurea coating. The drivers shall be protected by a perforated steel grille with scrim cloth backing and the enclosure shall be fitted with a pole-mount socket and threaded inserts for mounting accessories.
An IP24 rating version with a rain cowl shall be available as a factory option.
Dimensions (W x H x D) shall be 427mm x 696mm x 422mm (16.8in x 27.4in x 16.6in). Weight shall be 37kg (81.4lbs).
The loudspeaker shall be the Martin Audio CDD-LIVE 15.
- High-power, self-powered two-way system
- Coaxial Differential Dispersion™ technology
- Onboard Class D amplification and DSP
- Dante™ Digital Audio networking
- Global mains operation with Power Factor Correction
- User-rotatable CDD™ driver
- Vertical and horizontal mounting options
- Tour-grade, multi-angle plywood enclosure
- IP24 rating option with rain cowl
- Comprehensive mounting accessories
- Live sound reinforcement
- Theatre sound
- Corporate AV events
- Fixed installations in concert halls, ballrooms and HoW
- Stage monitor and sidefill
- Bars and clubs
|TYPE||High-output, Coaxial Differential Dispersion powered two-way system|
|55Hz – 20kHz ±3dB, -10dB @ 45Hz|
|DRIVER||LF: 15” (380mm)/3” (75mm) voice coil, long excursion, shared ferrite motor system with HF
HF: 1.4” (36mm) exit/3” (75mm) voice coil, titanium dome compression driver
|INPUT SENSITIVITY||-30dBu for 100dB SPL|
|MAXIMUM SPL (2)||126dB continuous / 132dB peak|
|DISPERSION||100˚-60˚ horizontal, 60˚ vertical (user-rotatable)|
|CROSSOVER||1.5kHz Active LR8 with low latency HF FIR equalisation
Balance presets for pole mount/ pole mount with sub/ stage monitor
|CONNECTORS||Female XLR input, male XLR link output, Dante Audio Neutrik® Ethercon|
|ANALOGUE INPUT IMPEDANCE||20 kΩ balanced to ground|
|MAXIMUM ANALOGUE INPUT LEVEL||24.6 Vpp (+21dBu), over voltage protected|
|INTERNAL PROCESSING||Multi-channel DSP, programmable via TCP/IP using VU-Net software
Up to 48dB/Oct HPF
Low latency HF FIR filters
Up to 200ms input delay
Pre-set selection via rear panel switch
|PROTOCOL||TCP/IP and UDP/IP|
|TYPE||2 channel switch-mode, class D,
Bridged Tied Load + 1 channel switch-mode, class D
|PEAK OUTPUT POWER||2500W total
2000W LF, 500W HF
|COOLING||External convection cooled, with internal fan|
|MAXIMUM AMBIENT TEMPERATURE||40°C (104°F) for full output|
|TYPE||Switch mode, fixed frequency with PFC|
|AC INPUT OPERATING RANGE||85 – 265V ~ AC, 50 - 60Hz|
|POWER FACTOR||> 0.98|
|NOMINAL POWER CONSUMPTION||160W|
|MAINS CONNECTOR||Neutrik® Powercon True1|
|ENCLOSURE||Extensively braced multi-laminate plywood.|
|FINISH||Textured black PU coating.|
|PROTECTIVE GRILLE||HEX perforated mild steel with protective zinc plating and black powder
coat finish. Backed with black grille cloth.
|FITTINGS||Top hat for pole mounting
15 x M8 mounting points
Two side pocket handles
Optional weather protection cowl
|IP RATING||IP24 factory option available|
|DIMENSIONS||(W) 427mm x (H) 696mm x (D) 422mm
(W) 16.81in x (H) x 27.42in (D) 16.61in
|WEIGHT||37kg (81.4lbs) excluding Transit cover|
Optional yoke and universal brackets