MARTIN AUDIO SX110B Black
Garantujemo najnižu cenu na tržištu!
U slučaju da pronadjete isti proizvod po povoljnijoj ceni,
molimo Vas da nas kontaktirate na:
The SX110 is an slimline subwoofer designed for applications that call for increased impact and low frequency performance in a visually unobtrusive enclosure. Its very small size makes it perfectly suited to installed sound applications where space is limited such as under banquette seating.
The SX110 features a 10” (250mm)/2” (50mm) voice coil driver and generously sized low frequency port for reduced air noise. An ideal subwoofer to augment the bass output of ADORN Series or small CDD loudspeakers, it can be used on the ground or flown using integral M8 inserts.
The SX110 enclosure is constructed from plywood and finished in black or white textured paint as standard. An impact-resistant perforated steel grille protects the drivers, and rubber feet on the base resist movement.
|TYPE||Slimline, direct radiating subwoofer|
|FREQUENCY RESPONSE (1)||50Hz-150Hz ± 3dB,
-10dB @ 42Hz
|DRIVER||1 x 10” (250mm)/2” (50mm) voice coil, long excursion, ferrite magnet|
|RATED POWER (2)||250W AES, 1000W peak|
|RECOMMENDED AMPLIFIER||VIA 2502|
|MAXIMUM SPL (9)||121dB continuous, 127dB peak (half space)|
|FINISH||Black or white|
|PROTECTIVE GRILLE||Perforated steel|
|CONNECTORS||2 x NL4 type|
|PIN CONNECTIONS (INPUT)||+1, -1 Link through: +2, -2|
|PINS CONNECTIONS (LINK)||+1, -1 Link through: +2, -2|
|FITTINGS||12 x M8 inserts|
|DIMENSIONS (INCL FEET)||
Martin Audio SX110
The loudspeaker shall be an ultra-compact subwoofer consisting of a 10” reflex-loaded, long-excursion, low frequency transducer.
The on-axis frequency response shall be 50Hz-150kHz +/- 3dB and the loudspeaker shall produce a maximum SPL of 127dB peak calculated at 1 metre. Power handling shall be 250W AES, 1000W peak. Rated impedance shall be 8 ohms. The rear connector panel shall be fitted with two NL4 type connectors and the loudspeaker shall be operated in conjunction with a dedicated electronic controller or amplifier.
The enclosure shall be made from plywood and fitted with M8 threaded inserts for attachment to suspension hardware. The drivers shall be protected by a perforated steel grille.
Dimensions (W x H x D) including feet shall be 417mm x 297mm x 415mm (16.4in x 11.7in x 16.3in). Weight shall be 12kg (26.5lbs).
The loudspeaker shall be the Martin Audio SX110.
Slimline direct-radiator subwoofer
1 x 10” (250mm) driver with 2” (50mm) voice coil
Large port for reduced air noise
Perforated steel grille
8Ω nominal impedance
M8 flying inserts
Cafes, bars and restaurants
Museums and Houses of Worship
Hotels and convention centres