Besplatna dostava za porudžbine preko 15.000 RSD (važi za pošiljke do 20 kg).
Do besplatne dostave Vam je ostalo još 15.000,00 RSD Čestitamo. Ostvarili ste besplatnu dostavu!

OSMOMARTOVSKI POPUSTI

još
00 Dan/a
00 Sat/i
00 Minut/a
00 Sekund/i
+
×

Reloop FLUX GO - DVS interfejs

Šifra: 20876
Obavesti me ako cena padne Postavi pitanje
Opcija:

 

Digital Vinyl System in your pocket

The Reloop Flux Go is an ultra-compact DVS interface for Serato DJ Pro. This smaller sibling of the acclaimed Serato DJ audio interface impresses with its portability and outstanding features.


Features
• Pocket-sized USB-C DVS audio interface for Serato DJ Pro
• Studio-grade 24-bit/96 kHz sound card with excellent audio and ultra-low latency
• 4x4 In/Out audio interface with headphone connection turns any mixer into a DVS system
• 2-channel (4x4 In/Out) USB-C DVS interface for Serato DJ Pro
• Turn any mixer into a professional digital vinyl system
• Unlocks full version of Serato DJ Pro and Serato DVS
• Studio-grade 24-bit class-compliant sound card with crystal-clear audio and ultra-low latency response
• Supports up to 96 kHz with high-quality D/A converters for excellent audio processing
• Plug 'n' Play for macOS systems and for other devices with USB-C (class-compliant), ASIO driver available for Windows
• Doubles as a Plug 'n' Play USB soundcard to play any system audio through the 3.5 mm headphone jack and RCA output simultaneously
• Convenient headphone volume control on the side panel
• Also functions as a studio interface for recording and playback of audio in any 3rd party audio software
• 2 inputs for turntables or CD/Media players, switchable in any combination via dedicated DIP switches
• 2 line outputs for connecting a mixer
• Dedicated GND terminal for grounding turntables
• Gold-plated, corrosion-resistant audio connections
• USB-C bus-powered cable connection for power and audio
• Power LED on the side panel for connection status
• Lightweight and ultra-compact with sturdy housing design for reliability on the go
• Extended edge design to protect connection terminals
• Supports the use of Serato Noisemap™ Control tone vinyl or CDs (not included)
• Incl. 1x USB-C to USB-C cable and instruction manual

Technical Data
Power/USB:
• USB audio interface with 24-bit / 44.1 kHz, 48 kHz, 96 kHz
• Class-compliant
• USB 2.0 high-speed
• Power Supply: DC 5 V / 500 mA (USB-C)

Audio:
• S/N Ratio (1 kHz reference input level, with A-w/20 kHz LPF, input short when no signal):
• Line input at +9 dBV, nominal 116 dB, limited ≥ 113 dB,
• Phono input at -23 dBV, nominal 97 dB, limited ≥ 94 dB
• THD + N (1 kHz reference input level, headphone volume to min, with A-w/(20 kHz LPF):
• Line input at 0 dBV, nominal ≥ 0.007%, limited ≥ 0.015%,
• Phono input at -32 dBV, nominal ≥ 0.015%, limited ≥ 0.03%
• Maximum Gain (Input 1 kHz / -50 dBV in Line mode, then reference to Phono mode):
• Phono internal gain +32 dB, nominal ± 0.5 dB, limited ± 1 dB
• Maximum Input (1 kHz input level to output level less than 1% T.H.D, with A-w/20 kHz LPF):
• Line input at +9 dBV, nominal +9 dBV, limited +8 dBV
• Phono input at -23 dBV, nominal -23 dBV, limited -24 dBV
• Maximum Output (1 kHz input level to output level less than 1% T.H.D, headphone volume to max, with A-w/20 kHz LPF):
• Line 10K OHM / +9 dBV, nominal +9 dBV, limited +8 dBV
• Phones 32 OHM / +3 dBV, nominal +3 dBV, limited +2 dBV

General:
• Dimensions: 115(W) x 82(D) x 26(H) mm
• Weight: 168 g
• Minimum system requirements: Please refer to the manufacturer's specifications for the system requirements of your DJ software.

Opis nije dostupan

Ocena:
Potvrdite da niste robot

Vezani artikli


Srodni proizvodi