Do besplatne dostave Vam je ostalo još 5.000,00 RSD

ARCAM SA20 Integrisano Poja─Źalo

Šifra: 13498
Na stanju
Regularna cena:
167.880,00 rsd
99.900,00 rsd (Bez PDV-a)
Cena sa popustom * :
Cena za kupovinu na rate:
Cena sa popustom * :
119.880,00 rsd

*Cena sa popustom mo┼że da se ostvari ukoliko se pla─ça gotovinski, virmanom (preko ra─Źuna) ili odmah debitnom i kreditnom karticom.

Iznos rate:
Ušteda : 48.000,00 rsd
Prikazana cena je za komad.

Garantujemo najni┼żu cenu!


Ukoliko ┼żelite da platite na rate kreditnom karticom, molimo Vas da izaberete broj rata.

Va┼żi za kreditne kartice logo_banka

Broj rata:

Dostupno u prodavnici:
  • Svetogorska 9, Beograd
Prijavi povoljniju cenu Obavesti me ako cena padne Postavi pitanje

The design of the HDA range draws upon all of Arcam’s experience as one of the UK’s most respected audio companies, to produce Arcam’s best performing range of audio products yet – using the best quality components and engineering practices, the HDA range is designed and built to give you years of listening enjoyment.



he Arcam SA20 is an Integrated Amplifier that improves upon the performance of the previous Arcam A29. Class G amplification and 80W of power per channel contribute to impeccable sound and efficiency.

What is Class G?

There are two frequent problems with hi-fi amplifiers. Class A, the traditional audiophile’s choice, uses a single power supply constantly running at full capacity, even when there’s no signal coming through. Great for reproducing those subtle details at low levels however struggles to provide extreme power when needed.

Class A/B, the most common amp class, switches between the two internal amplifiers, one for each half of the waveform. Far more efficient but often a recipe for crossover distortion, since those low-level details we crave can get lost within any mis-match between the two switching over.

Class G is essentially a hybrid amplifier, utilising Class A specifically for low-level signals, but when required switching in an additional power supply to power those larger sections of the waveform.

A class of its own:

  • Class G amplification for impeccable sound and efficiency
  • 80W of power per channel
  • 5 analogue inputs including phono
  • 3 digital inputs
  • 32-bit DAC,Sabre ESS9038K2M
  • Full I/P control
  • Total harmonic distortion + noise = 0.003%
  • Designed in the UK


Both Channels, 8Ω, 20Hz—20kHz 90W
Single Channel, 4Ω, At 1kHz 180W
Harmonic Distortion, 80% Power, 8Ω at 1kHz 0.002%
Input Sensitivity At 1kHz 5mV
Input Impedance 47kΩ + 100pF
Frequency Response (ref. RIAA curve) 20Hz – 20kHz ± 1dB
Signal/Noise Ratio (A-wtd) 50W, Ref. 5mV Input 80dB
Overload Margin, Ref. 5mV At 1kHz 21dB
Nominal Sensitivity 1V
Input Impedance 10kΩ
Maximum Input 6Vrms
Frequency Response 20Hz – 20kHz ± 0.2dB
Signal/Noise Ratio (A-wtd) 50W, ref. 1V Input 106dB
Frequency Response 20Hz - 20kHz ± 0.05dB
Total Harmonics Distortion + Noise 0.0007%
Signal/Noise Ratio (A-wtd) 115dB
Supported Sample Rates (Optical) 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz
Supported Sample Rates (Coaxial) 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
Bit Depth 16-bit – 24-bit
Nominal Output Level 630mV
Output Impedance 230Ω
Maximum Output Level Into 600Ω 5Vrms
Output Impedance
Load Range 16Ω – 2kΩ
Mains Voltage 110–120V or 220–240V, 50–60Hz
Maximum Power Consumption 500W
Dimensions (Including Feet, Control Knob & Speaker Terminals) W433mm x H87mm x D323mm
Weight (Net) 9.2kg
Weight (Gross) 11.1kg
Supplied Accessories Mains leads
Remote control
2 x AAA batteries


Vezani artikli

Srodni proizvodi