Biamp CM60DTD - Plafonski zvučnik
Garantujemo najnižu cenu!
- Ugrinovački Put 10n, Zemun
The CM60DTD 6.5” two-way versatile built-in loudspeaker is suitable for the distribution of speech and music at a higher volume level. It provides a powerful high-end, dynamic, warm sound due to the tuned bass reflex port and controlled performance. The loudspeaker can be installed by two loudspeaker clamps only, which speeds-up installation and reduces labor time. The 70/100-volt power tapping can be selected on the front and also offers 16 ohms connectivity. The CM60DTD comes with thin edge grill and integrated neodymium grill fixing magnets which allows an inconspicuous integration matching the surroundings of your venue.
FEATURES
- Requires only 6.2" (157 mm) mounting depth
- High speech intelligibility coupled with full-range music reproduction
- Thin-edge, magnetically attached grille
- Tap switch allows for 70V/100V or 16Ω low impedance operation
- Tuned bass reflex port for optimized low frequency performance
- Loudspeaker overload protection for 24/7 failsafe operation
- ETL listed to conform with UL Std 1480A and UL 2043; Certified to CSA C22.2#62368-1
TECHNICAL SPECIFICATIONS
Operating Mode - Passive
Operating Environment - Indoor
Operating Range - (-10dB)75 Hz to 22 kHz
Nominal Beamwidth - (H x V)150° conical
Transducers - LF 1 x 6.5" (165 mm) coated paper cone, HF 1 x 1" (25 mm) soft dome
Continuous Power Handling@ Nominal Impedance - 31V60W @ 16Ω (240W peak)
Nominal Sensitivity @ 1m - @ 1W86 dB@ 2.83V83 dB
Nominal Maximum SPL @ 1m - Peak110 dBContinuous104 dB
Transformer - 70V: 60W, 30W, 15W, 7.5W, 3.75W100V: 60W, 30W, 15W, 7.5W
Protection - 3-step self-resetting protection
Recommended Amplifiers - 60W - 120W @ 16Ω (31V - 44V)
PHYSICAL
Input Connection - (1) 4-way Euroblock connector with permanent pass-through
Mounting Provisions - 2 mounting clamps with grip range of 0.2" - 2.6" (3 - 65 mm); Cover plate with 0.75" (22 mm) NPT knockout for conduit connectors
Safety Features - 2 hang points
Compliance - ETL listed to comply with UL 1480A and UL 2043; Certified to CSA C22.2#62368-1;Suitable for use in air handling spaces per NFPA 70, NFPA 90
Dimensions H x Dia. - 6.2" x 10.2" (157 mm x 258 mm)
Cutout Diameter - 9.1" (232 mm)Weight8.8 lbs (4.0 kg)
Finish - Refer to the Technical Drawings (page 3)
Accessories (included) - Tile rails; tile rail spacers; cutout templat
OPTIONS
Accessories - SQGR square grille
Opis nije dostupan
Vezani artikli
Srodni proizvodi
