Sennheiser MD 441-U
The Sennheiser MD 441-U is a supercardioid studio dynamic microphone. Embraced by the recording industry as one of the most versatile dynamic microphones available, the MD 441-U is a proven workhorse designed for any recording application.
The microphone features a supercardioid pattern providing impressive rejection of off-axis noise due to mechanical noise, room ambiance, monitors, etc. The dynamic capsule handles high sound pressure levels and provides a wide 30 Hz to 20 kHz frequency response. This makes the microphone suitable for drums, percussion, electric guitar, horns, and other instruments with high transient (peak) response.
Adding to the versatility is a 5-position low-frequency roll-off switch and a 2-position high-frequency contour switch. The output stage features a humbucking coil, suppressing noise and hum caused by bad cables, grounding, etc.
Dynamic Capsule
The MD 441-U features a shock-mounted internal capsule resulting in even signal response in close and reasonable distances.
Supercardioid Pattern
The supercardioid polar pattern is effective in attenuating off-axis noise and ambiance.
5-Position Bass Roll-Off
The 5-position, low-frequency roll-off switch offers flexible bass attenuation allowing the microphone to be used in a variety of situations.
2-Position High-Frequency Contour
The High-Frequency (treble boost) switch accentuates high-end frequencies for added intelligibility.
Integral Windscreen
An integral windscreen provides effective diffusion of wind due to explosive "P" and "B" sounds and adds further protection to the capsule.
Sennheiser MD 441-U Specs
Microphone
Primary Applications Live Sound, Studio Recording
Form Factor Stand/Boom Mount
Intended Sound Sources Vocals, Instrument
Sound Field Mono
Operating Principle Pressure Gradient
Capsule Dynamic
Polar Pattern Supercardioid
Orientation End Address
High-Pass Filter None
Tone Adjustment None
Gain Adjustment None
On-Board Controls None
Windscreen Built-In
Performance
Frequency Range 30 Hz to 20 kHz
Impedance 200 Ohms
Load Impedance 1 Kilohms
Sensitivity 1.8 mV/Pa
Connectivity
Output Connectors (Analog) 1 x XLR 3-Pin (on Mic)
Headphone Connector None
Physical
Mounting Mic Clip/Stand Adapter (Included)
Dimensions H: 1.31 x W: 1.44 x L: 10.62" / H: 33 x W: 36 x L: 270 mm
Weight 12 oz / 450 g
