Do besplatne dostave Vam je ostalo još 2.000,00 RSD
RSD
 
 
+
×

SHURE BETA 57 A

Šifra: 6230
19.514,00 rsd
16.261,67 rsd (Bez PDV-a)
Iznos rate:
Prikazana cena je za komad.

Garantujemo najnižu cenu!

Prijavi povoljniju cenu Obavesti me ako cena padne Postavi pitanje
Opcija:

 
The Shure Beta 57A® is a high output supercardioid dynamic microphone designed for professional sound reinforcement and project studio recording. It maintains a true supercardioid pattern throughout its frequency range. This insures high gain-before-feedback, maximum isolation from other sound sources, and minimum off–axis tone coloration. 
 Excellent for acoustic and electric instruments as well as for vocals, the extremely versatile Beta 57A dynamic microphone provides optimal warmth and presence. Typical applications include drums, guitar amplifiers, brass, woodwinds and vocals.


Tailored frequency response provides drums, guitars, vocals, and horns with studio quality sound


Uniform supercardioid pattern for high gain-before-feedback and superior rejection of off–axis sound


Hardened steel mesh grille that facilitates use of proximity effect and resists wear and abuse


Neodymium magnet for high signal–to–noise ratio output


Minimally affected by varying load impedance


Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration


Legendary Shure quality and reliability


Type Dynamic (moving coil)   Frequency Response 50 to 16,000 Hz  NOTE: The curve above shows on-axis response at a distance of 2 feet from a uniform sound source. Your response may vary, depending on microphone position.   Polar Pattern Supercardioid, rotationally symmetrical about microphone axis, uniform with frequency.   Output Level (at 1,000 Hz) Open Circuit Voltage -51 dBV/Pa* (2.8 mV) *1 Pa = 94 dB SPL   Impedance Rated impedance is 150 ohms (290 ohms actual) for connection to microphone inputs rated low Z.   Phasing Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3.   Connector Three-pin professional audio connector (male XLR type).   Case Silver blue enamel-painted die cast metal with hardened, matte-finished steel mesh grille.   Adjustable Stand Adapter Slip-in, adjustable through 180 degrees, with standard 5/8"-27 thread.   Net Weight 275 grams (9.6 oz)
 

The Shure Beta 57A® is a high output supercardioid dynamic microphone designed for professional sound reinforcement and project studio recording. It maintains a true supercardioid pattern throughout its frequency range. This insures high gain-before-feedback, maximum isolation from other sound sources, and minimum off–axis tone coloration. 

 
Excellent for acoustic and electric instruments as well as for vocals, the extremely versatile Beta 57A dynamic microphone provides optimal warmth and presence. Typical applications include drums, guitar amplifiers, brass, woodwinds and vocals.

  • Tailored frequency response provides drums, guitars, vocals, and horns with studio quality sound
  • Uniform supercardioid pattern for high gain-before-feedback and superior rejection of off–axis sound
  • Hardened steel mesh grille that facilitates use of proximity effect and resists wear and abuse
  • Neodymium magnet for high signal–to–noise ratio output
  • Minimally affected by varying load impedance
  • Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
  • Legendary Shure quality and reliability



Type

Dynamic (moving coil)
 
Frequency Response
50 to 16,000 Hz
 
NOTE: The curve above shows on-axis response at a distance of 2 feet from a uniform sound source. Your response may vary, depending on microphone position.
 
Polar Pattern
Supercardioid, rotationally symmetrical about microphone axis, uniform with frequency.
 

Output Level (at 1,000 Hz)

Open Circuit Voltage -51 dBV/Pa* (2.8 mV)
*1 Pa = 94 dB SPL
 

Impedance

Rated impedance is 150 ohms (290 ohms actual) for connection to microphone inputs rated low Z.
 

Phasing

Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3.
 

Connector

Three-pin professional audio connector (male XLR type).
 

Case

Silver blue enamel-painted die cast metal with hardened, matte-finished steel mesh grille.
 

Adjustable Stand Adapter

Slip-in, adjustable through 180 degrees, with standard 5/8"-27 thread.
 

Net Weight

275 grams (9.6 oz)

 

Ocena:

Vezani artikli


Srodni proizvodi

SHURE SM57 LCE

17.880,00 rsd 19.900,00 rsd
Dodaj u korpu

BEYERDYNAMIC TG D70d

19.080,00 rsd 27.480,00 rsd
Dodaj u korpu

BEYERDYNAMIC TG I50d

17.880,00 rsd
Dodaj u korpu

Sontronics HALO - Mikrofon za gitarsko pojačalo

19.080,00 rsd 25.080,00 rsd
Dodaj u korpu