The MAC 101 is a remarkably small, super light and easy-to-use LED moving head wash light with an amazingly bright beam for such a compact luminaire. It features rapid movement and calibrated colors with a low price tag that allows for revolutionary set, stage and decorative lighting design. |
| Features |
- Variable CTC
- Color calibrated
- 2400 lm output
- Bright and tight beam (13° ἀ;eld angle)
- Smooth, electronic dimming
- High efficieny, low power consumption, long lifetime
- Ultra-compact, low weight design (3.7 kg)
- Rapid movement – the fastest MAC ever
|
|
| Length: 241 mm (9.5 in.) across yoke |
| Width: 241 mm (9.5 in.) across yoke |
| Height: 304 mm (12.0 in.) |
| Weight: 3.7 kg (8.2 lbs.) |
|
| Electronic 'color wheel' effect: 33 LEE-referenced colors plus white, color wheel rotation effect, random color |
| Color mixing: RGB |
| Red: 0 - 100% |
| Green: 0 - 100% |
| Blue: 0 - 100% |
| Color temperature control: Variable 2500 - 10 000 K |
| Shutter effect: Electronic, with pulse and random effects |
| Electronic dimming: 0 - 100%, four dimming curve options |
| Pan: 540° |
| Tilt: 240° |
| Pan and tilt speed: Adjustable via onboard control panel and DMX |
|
| Control options: 3 control modes - RGB raw, RGB calibrated, Basic (RGB + CTC disabled) |
| RDM: Implemented |
| Control resolution: 8-bit, with 16-bit control of pan & tilt |
| DMX channels: 8/12 |
| Setting and addressing: Control panel with backlit graphic display |
| Protocol: USITT DMX512-A, ANSI/ESTA E1.20 RDM |
| Transceiver: RS-485 |
| Fixture software update: Via DMX with Martin™ USB Duo DMX Interface Box |
|
| Light source: Cree XP-E high power emitters |
| Minimum LED lifetime: 50 000 hours (to >70% luminous output)* |
| LED refresh rate: 1220 Hz |
| *Figure obtained under manufacturer´s test conditions |
|
| Color: Black or white |
| Housing: High-impact flame-retardant thermoplastic |
| Protection rating: IP20 |
|
| Mounting points: One M12 threaded hole for rigging clamp |
| Location: Indoor use only, must be fastened to surface or structure |
| Orientation: Any |
| Minimum distance to combustible materials: 100 mm (3.9 in.) from head, no minimum distance from base |
| Minimum distance to illuminated surfaces: 200 mm (7.9 in.) |
|
| AC power input: Neutrik PowerCon |
| AC power throughput: Neutrik PowerCon |
| DMX data in/out: 5-pin locking XLR |
|
| AC power: 100-240 V nominal, 50/60 Hz |
| Maximum total power consumption: 123 W |
| Power supply unit: Auto-ranging electronic switch mode |
| Main fuse: 5 AT (slow blow) |
| Typical power consumption, all effects static, zero light output: |
|
| 100 V, 50 Hz: 122 W, 1.3 A, PF 0.991 |
| 120 V, 60 Hz: 121 W, 1.1 A, PF 0.987 |
| 208 V, 60 Hz: 123 W, 0.7 A, PF 0.938 |
| 230 V, 50 Hz: 123 W, 0.6 A, PF 0.915 |
| 240 V, 50 Hz: 123 W, 0.6 A, PF 0.900 |
| PF = power factor |
| Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%. |
|
| Cooling: Forced air (temperature-regulated, low noise, user-definable levels) |
| Maximum ambient temperature (Ta max.): 40° C (104° F) |
| Minimum ambient temperature (Ta min.): 5° C (41° F) |
| Total heat dissipation (calculated, +/- 10%): 420 BTU/hr. |
|
 |
| EU safety: EN 60598-2-17, EN 62471 |
| EU EMC: EN 55103-1, EN 55103-2, EN 55015, EN 61547 |
| US safety: UL 1573 |
| US EMC: FCC Part 15 Class A |
| Canadian safety: CSA E598-2-17 |
| Canadian EMC: ICES-003 Class A |
| Australia/NZ: C-TICK N4241 |
|
| M12 bolt suitable for use with Martin rigging clamps |
|
|
|
|
|
| 3 m (9.8 ft.) power cable, 12 AWG, SJT, with PowerCon NAC3FCA power input connector |
P/N 11541503 |
|
| Neutrik PowerCon NAC3FCA power input connector, cable mount, blue |
P/N 05342804 |
|
| Neutrik PowerCon NAC3FCB power output connector, cable mount, light grey |
P/N 05342805 |
|
| Set of eight narrow diffusers for MAC 101 |
P/N 91616023 |
|
| Set of eight wide diffusers for MAC 101 |
P/N 91616018 |
|
| Set of 4 top hats for MAC 101 |
P/N 91611358 |
|
| Set of 5 quick-mount surface mounting brackets for MAC 101 |
P/N 91606017 |
|
|
|
| Half-coupler clamp |
P/N 91602005 |
|
| Quick trigger clamp |
P/N 91602007 |
|
| Safety wire, safe working load 50 kg (110.2 lbs.) |
P/N 91604003 |
|
| 8-unit flightcase for MAC 101™ |
P/N 91515010 |
|
|
| Martin USB Duo™ DMX Interface Box |
P/N 90703010 |
|
| Martin RDM 5.5 Splitter™ |
P/N 90758150 |
|
|
| MAC 101™ in cardboard box |
P/N 90231600 |
|
| MAC 101™ in 8-unit flightcase |
P/N 90231610 |
|
| MAC 101™, white finish, in cardboard box |
P/N 90231630 |
|
|
| Photometric Data |
Standard (Only blue LEDs on) |
| Efficacy: 5.7 lumens per watt |
| One-tenth peak angle: 11.5° |
| Total output: 320 lm |
Standard (Only green LEDs on) |
| Efficacy: 23 lumens per watt |
| One-tenth peak angle: 12.5° |
| Total output: 1300 lm |
Standard (Only red LEDs on) |
| Efficacy: 23.4 lumens per watt |
| One-tenth peak angle: 13.5° |
| Total output: 790 lm |
Standard (All LEDs on) |
| Efficacy: 22.7 lumens per watt |
| One-tenth peak angle: 13.5° |
| Total output: 2600 lm |
Standard (All LEDs on, Narrow diffuser) |
| Efficacy: 20.5 lumens per watt |
| One-tenth peak angle: 17° |
| Total output: 2400 lm |
Standard (All LEDs on, Medium diffuser) |
| Efficacy: 17.2 lumens per watt |
| One-tenth peak angle: 52° |
| Total output: 2000 lm |
© 2010-2013 Martin Professional Aps. Specifications subject to change without notice |