MARTIN MAC AURA XB
Extra-bright version of the successful MAC Aura
Features
LIGHT SOURCE
6,000 lumens RGBW light output
High narrow intensity: 220,000 cd
Beam: 19x 15W RGBW LEDs
Aura: 30x 0.3W RGB LEDs
Fully calibrated using Martin's Full Gamut Color Calibration
Flicker-Free operation – LED driver frequency suitable for all kinds of camera applications
OPTICS
Tight beam and beautiful wash field
9.0 – 59.1˚ zoom – Precise, silent and fast zoom
Even wash field with zero hotspot
High intensity mid-air beams
Minor color temperature shift from center to edge
SOFTLENS ACCESSORY
Creates a softer edge wash field
Reduces glare from fixture lens
Attaches to front of fixture
Can remain attached to fixture inside flightcase SiP
COLOR PALETTE
RGBW color mixing with very bright and vibrant saturated colors, as well as soft pastels and white tones
Calibrated, Extended & Raw Color Modes
Calibrated CTC control: 2,500 – 10,000 K
Virtual Color Wheel
DYNAMIC EFFECTS
Built-in FX macros
High-speed pan, tilt and zoom
COOLING AND NOISE
Ultra-quiet cooling system
Low noise pan/tilt and effects operation
CONSTRUCTION
Weight 6.5 kg (14.4 lbs.)
Dimensions: 302 x 332 x 163 mm
CONTROL
Control panel on the back of the head
DMX in & thru
RDM over DMX
Specifications
Physical
Width (across yoke): 302 mm (11.89 in.)
Width (base): 222 mm (8.74 in.)
Height (head forward): 360 mm (14.17 in.)
Height (maximum): 390 mm (15.35 in.)
Depth (head): 163 mm (6.42 in.)
Depth (base): 138 mm (5.43 in.)
Minimum center-to-center distance in side-by-side installation: 320 mm (13 in.)
Weight: 6.5 kg (14.4 lbs)
Dynamic Effects
Beam Dimmer/Shutter: 0 - 100% continuous dimming, regular and random strobe/pulse/burst, instant open and blackout
Beam Dimming options: Choice of four dimming curves
Beam Color Mixing: RGB (RGBW in Raw Mode), independently variable 0 - 100%
Beam Color Temperature Control: Variable 2,500 – 10,000 K
Beam Virtual Color wheel: 33 color presets, continuous rotation & random color
Zoom: Motorized with 1:6 zoom ratio
Pan: Motorized 540°
Tilt: Motorized 232°
Aura Dimmer/Shutter: 0 – 100% continuous dimming, regular and random strobe/pulse/burst effects, instant open and blackout
Aura Dimming options: Choice of four dimming curves
Aura Color Mixing: RGB, independently variable 0 - 100%
Aura Virtual Color wheel: 33 color presets, continuous rotation & random color
Pre-programmed effects: Two ranges of FX on Beam, Aura or Combination; independent or synchronized/combined
Control and Programming
Control Protocols: DMX and RDM
DMX Modes: Standard & Extended
DMX Channels: 14 & 25
16-bit Controllable Parameters: Pan and Tilt
Setting and Addressing: Display Menu or RDM
Local User Interface: Backlit LCD Display
DMX Compliance: USITT DMX512-A
RDM Compliance: ANSI/ESTA E1.20
DMX/RDM Transceiver: Galvanic-isolated RS-485
Firmware Update: via DMX using Martin Companion
Optics
Front Lens Diameter: 200 mm (7.87 in.)
Zoom Range: 1:6
Full Zoom Range at Half Peak (Beam Angle): 9.0° - 41.7°
Full Zoom Range at Tenth Peak (Field Angle): 10.3° - 59.1°
Beam Light Source: 19 x 15 W RGBW LED
Aura Light Source: 30 x 0.3 W RGB LED
Max. Total Beam LED Engine Power: 285 W
Max. Total Aura LED Engine Power: 9 W
Minimum LED lifetime: > 50.000 hours (to > 70% luminous output)*
*Figure obtained under manufacturer's test conditions
Photometric Data
Light Engine Luminous Output: 10,000 lumens
Fixture Luminous Output Wide: 6,000 lumens
Fixture Luminous Output Narrow: 4,300 lumens
Peak Luminous Intensity Narrow: 220,000 cd
CCT: Variable 2,500 K – 10,000 K (+/- 200 K)
CRI (Color Rendering Index): ≥ 67
CQS (Color Quality Scale): ≥ 82
TM-30 Rf (IES TM-30-15 Fidelity Index): ≥ 76
TM-30 Rg (IES TM-30-15 Gamut Index): ≥ 119
TLCI (Television Lighting Consistency Index): ≥ 48
Beam LED Refresh Rate: 1,200 Hz
Aura LED Refresh Rate: 4,395 Hz
Binning: Tight color and flux binning
Calibration: Full Gamut Color Calibration of Beam and Aura
Color Modes: Extended Color Mode, Calibrated Color Mode and Raw Color Mode
* All Photometric Data measured in steady state (30 minutes warm-up time) at 25°C ambient
* All Photometric Data measured at 6500 K white
Construction Housing: High-impact thermoplastic, flame-retardant to UL 94 5VA Color: Black Protection rating: IP20
Installation Mounting points: M12 threaded hole for rigging clamp and attachment points for surface-mounting bracket Location: Indoor Orientation: Any Minimum distance to combustible materials: 0.2 m (7.87 in.) Minimum distance to illuminated surfaces: 1.0 m (39.37 in.)
Connections AC mains power in/thru: Neutrik powerCON TRUE1 DMX and RDM data in/thru: Neutrik 5-pin locking XLR
Electrical
AC power: 100-240 V AC nominal, 50/60 Hz
Power supply unit: Auto-ranging electronic switch mode
Typical half-cycle RMS inrush current at 230 V, 50 Hz: 10.7 A
Power Factor: 0.99 @ 100 V / 120 V , 0.97 @ 208 V , 0.95 @ 230 V / 240 V
Max current draw: 3.8 A @ 100 V / 120 V , 1.8 A @ 208 V / 230 V / 240 V
Typical current draw: 3.8 A @ 100 V , 3.2 A @ 120 V , 1.8 A @ 208 V , 1.7 A @ 230 V , 1.6 A @ 240 V *
Power Consumption
Maximum: 400 W
Typical: 359 W *
Idle: 25 W *
* Measurements made at nominal voltage. Allow for a deviation of +/- 10%.
Typical: full output white, no effects moving, regulated fan speed.
Idle: no output, no effects moving, regulated fan speed.
Thermal Cooling: Forced air (temperature-regulated, low noise, user-definable levels) Maximum ambient temperature (Ta max.): 40° C (104° F) Minimum ambient temperature (Ta min.): 5° C (41° F) Total heat dissipation (calculated, +/- 10%): 1230 BTU/hr.
Acoustic Data Sound Pressure Level (LpA) @ 1 m (default regulated fan mode, full output): 28.9 dB(A)
Environmental RoHS: Compliant REACH: Compliant WEEE: Compliant Proposition 65: Compliant Efficacy (max output): 26.7 lm/W LWR*: 923 lm/kg (417 lm/lb)
LWR = Lumen-to-Weight Ratio
Approvals EU safety: EN 60598-2-17 (EN 60598-1), EN 62471 EU EMC: EN 55103-1, EN 55103-2, EN 55015, EN 61547 US safety: UL 1573 US EMC: FCC Part 15 Class A Canadian safety: CSA E598-2-17 (CSA E60598-1) Canadian EMC: ICES-003 Class A Australia/NZ: C-TICK N4241 United Kingdom: UKCA Thailand: TIS
Included Items
M12 bolt suitable for use with Martin rigging clamps
User Manual in Eng/Fre/Ger
Related Items Martin Companion Cable (for firmware update over DMX): P/N 91616091 Martin Companion Software (for firmware update over DMX): Free download from www.martin.com
Accessories
Optical
MAC Aura XB SoftLens: P/N 91611730HU
Transport and Storage
Flightcase for 6 x MAC Aura XB: P/N 91515020
Power Input Cables
Power Input Cable, H07RN-F, 2.5 mm2, bare ends to TRUE1 NAC3FX-W TOP (female), 1.5 m (4.9 ft.) P/N 91611797
Power Input Cable, SJOOW, 12 AWG, bare ends to TRUE1 NAC3FX-W TOP (female), 1.5 m (4.9 ft.) P/N 91610173
Power Linking Cables
Power relay cable, H07RN-F, 2.5 mm2, TRUE1 to TRUE1, 2.5 m (8.2 ft.): P/N 91611796
Power relay cable, SJOOW, 12 AWG, TRUE1 to TRUE1, 2.5 m (8.2 ft.): P/N 91610172
Power Connectors
Cable Connector, Neutrik powerCON TRUE1 TOP Female: P/N 91611789HU
Cable Connector, Neutrik PowerCON TRUE1 TOP Male: P/N 91611788HU
Installation Hardware
Quick surface mounting bracket for MAC Aura XB, set of 5: P/N 91606018
G-clamp (suspension with fixture hanging vertically downwards only): P/N 91602003
Quick Trigger Clamp (suspension with fixture hanging vertically downwards only): P/N 91602007
Half-coupler Clamp: P/N 91602005
Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, black: P/N 91604006
Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, silver: P/N 91604007
Verified Third-Party Accessories
Beam Control
MAC Aura XB Top Hat: P/N City Theatrical 2792
MAC Aura XB Egg Crate: P/N City Theatrical 2793
MAC Aura XB Concentric Rings: P/N City Theatrical 2791
MAC Aura XB Beam Control Accessory Mount Kit: P/N City Theatrical 104-00117
Ordering Information MAC Aura XB™ in cardboard box: P/N 90232100HU MAC Aura XB™ in 6-unit flightcase: P/N 90232110HU MAC Aura XB™ white in cardboard box: P/N 90232105HU
Opis nije dostupan