AxelTech FOX 3
The new generation of AxelTech digital silence detector and change over continues in the tradition of quality, reliability and cost effectiveness, renowned and valued in the broadcasting environment all around the world.
FOX 3 is a fully digital audio modular platform which combines Switcher & Changeover, Silence Detector, format conversion, FM tuner.
The new platform offers cutting-edge technology that feats the ease of use, exceptional performances and unparalleled sound quality.
FOX 3 provides the widest range of I/O to match the most High-end broadcast user requirements. Any inputs can be routed to a different audio output thanks to the A/D and D/A converter.
Analog Input - AUDIO
Number of Inputs: 1 Stereo
Connectors: 2 XLR, female - Electronically balanced – EMI Suppression
A/D Conversion: 24bit Sigma-Delta Conversion (Crystal CS4272)
AD Clipping Point: +24.0 dBu
Operative Nominal Level: From –12.0dBu to +13.0dBu (0.1dBu Step) Software adjustable
Line Impedance: 10 kΩ (Electronically balanced selectable)
Distortion: Less than 0.01% TDH+NOISE (0.0 dBu 1Khz)
AD Dynamic Range: 108 dB RMS (110 dB A weighted)
Input Modes: Stereo, Mono (Left), Mono (Right), Mono (Left+Right)
CMRR input: >60 dB (20 Hz to 20 kHz)
Digital Input – AUDIO
Inputs Number: 2
Connectors: XLR, female – Electronically balanced– EMI Suppression
Format: AES3/EBU
Input impedance: 110 Ω
Sample rate: 32 kHz / 44.1 kHz / 48 kHz /96 kHz / 192 kHz with src and jitter attenuation
Operative Nominal level: From 0.0 dBFs to -25.0 dBFs (0.1 dBu step) Software adjustable
Dynamic Range: 125 dB (Typical), 122 dB (Minimal)
Distortion: Less than 0.01% TDH+NOISE (0.0 dBu 1Khz)
Input Modes: Stereo, Mono (Left), Mono (Right), Mono (Left+Right)
Conversion dynamic range: 124 dB (32 KHz) | 126 dB (44,1 kHz) | 126 dB (48 kHz) 122 dB (96 kHz)
Conversion resolution: 24 bits
MPX INPUT
Input Number: 2
Connectors: Unbalanced on BNC – EMI Suppression
Input impedance: 50 KΩ
Adjustable Nominal Input Level (Sensitivity): -6 dB to +13,0 dB (0.1 dBu step) Software adjustable
Max Input Level: +18,0 dBu
A/D Conversion: Texas PCM4220
Analog Output AUDIO
Output Number: 1 Stereo
Connectors: 2 XLR, female - Electronically balanced – EMI Suppression
D/A Conversion: 24 bit Sigma-Delta Conversion (Crystal CS4272)
Output Level: -6.0 dBu to +20.0 dBu (0.1 dBu Step)
Output Level Max.: + 24,0 dBu
Output Impedance: 10 Ω
Load Impedance: 600 Ω or greater
THD + Noise: Less than 0.01% (0.0dBu @ 1 kHz)
Signal to noise Ratio: >80 dB unweight - 100% Mod. 20 Hz–15 KHz
L/R CrossTalk: < –70 dB, 20 Hz–15 KHz
Digital Output AUDIO
Outputs Number: 2 (1st for audio, 2nd for audio or Digital MPX)
Connectors: Balanced on 1 XLR – EMI Suppression
Format: AES3/EBU
Output impedance: 110 Ω
Sample rates: 32 kHz / 44.1 kHz / 48 kHz / 96 kHz / 192 kHz Software selectable
Resolution: 24 bit
Operative Nominal level: From 0.0 dBFs to -30dBFs (0.1 dBu step)
Dynamic Range: 125 dB (Typ), 122 dB (Min)
Distortion: Less than 0.01% TDH+NOISE (0.0 dBu 1 Khz)
COMMUNICATION
Connection with radio automation: Software: Yes
Network connectivity: 4 TCP ports / 4 UDP / 1 SNMP
Configuration software: Web Server, FTP
Password protection: Yes
ASCII ProtocolL: Configuration messages
REST Command: Yes
Alert notifications on user-defined events via SNMP traps: Yes
Embedded SNMP agent permitting: active management tasks: Yes
Supported Network Protocols: HTTP, SNTP, UDP, TCP, NTP, FTP
System Features
Remote interface GPIn: 6x GP In optocoupled
Remote interface GPOut: 4x Relays – dry contacts
Remote interface connector: DB 25 female connector - EMI suppressed
Remote interface GPIO Voltage and Current: DC 5V Source and Sink 10 mA
Communication Port: 2 x RS232, 3 x USB, 1 x LAN
Serial Interfaces:
• 1st RS232 on DB9 female connector - EMI suppressed
• 2nd RS232 on DB25 female connector - EMI suppressed
Firmware can be upgraded in the field: Yes
Front-panel Colour TFT Display: No (Falcon X6) / Yes (Falcon X5, X7, D7 and Fox 3)
Data may be entered on-site with Front-panel Buttons: No (Falcon X6) / Yes (Falcon X5, X7, D7 and Fox 3)
Front Panel LEDs: 40
PHYSICAL
Dimensions: 485 x 44 x 240 mm (1 rack unit)
AC Rate Voltage: 230Vac / 110Vac +/- 10% - 30VA – Connector IEC 3-Wire detachable
AC Frequency: 50 Hz / 60 Hz +/- 4%
Power factor: 0,9
Processing architecture:
• Fully digital, based on DSP 24bit/250Mhz.
• 5 band Signal processing
Weight: 3,5 Kg
Operating temperature: -5°C / +50°C up to 95% non condensing
Max Altitude: Up to 3000 meters above marine level
Safety Standard: CE
RFI: The equippment has been designed to work in strong RF Fields and it is provided with Standard RFI filters. Necessary RFI filters are standard and same are provided.
Grounding: One more earth terminal are provided in the body to connect audio ground
Opis nije dostupan
