Focusrite ISA ADN2 Dante A/D Ca
With the introduction of the ISA ADN2, the classic ISA mic pre can be implemented directly on a Dante network, providing console-grade preamps to the most advanced of audio networks. ISA ADN2 is an optional two-channel A-D card that provides high-quality analogue-to-digital conversion for the ISA One mic preamp and DI. Featuring Dante, AES3, ADAT and S/PDIF connectivity, the card operates at sample rates up to 24-bit/192kHz.
The card offers a familiar set of standard professional connectors with primary and secondary RJ45 Dante output ports, an XLR connector for AES3 output, a TOSLINK connector for ADAT output and RCA connector for S/PDIF output. Word Clock I/O on BNC connectors allows synchronisation with many external devices.
Key Features
• Two-channels of high-quality, precision analogue-to-digital converter for ISA One
• Up to 24-bit/192kHz sample rate
• Dante connectivity via Primary and Secondary Ethernet ports provide redundancy and auto switchover in case of failure
• Two-channel XLR connection for AES3 output
• Two-channel RCA connection for S/PDIF output
• Two-channel TOSLINK connector for ADAT output
• Word Clock I/O on BNC connectors allows synchronisation with many external devices
• RedNet Control and Dante Controller software (included) allow Dante routing and control from a computer; no hardware patching required
Specifications
Audio performance
0 DBFS Reference Levels: 22dBu
Frequency Response: 20Hz - 20kHz ±0.1dB
THD+N: -105dB (0.0006%) unweighted, 20Hz - 20kHz; -1dBFS input
Noise In Presence Of Signal: -121dBu 'A'-Weighted (typical)
Dynamic Range: 121dB 'A'-weighted (typical), 20Hz - 20kHz
Digital performance
Supported Sample Rates: 44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz (-4% / -0.1% / +0.1% / +4.167%) at 24 bit
Clock Sources: Internal or Word Clock
Front panel output connectivity
Channel Count: 2 x Dante channels
Output: 1 x Male XLR
Dante
Output: 2 x Ethernet standard RJ45 connectors (Compatible with Cat 5e and above).
Channel Count: 2 x Dante channels
AES3
Channel Count: 2 x Dante channels
Output: 1 x Male XLR
ADAT
Channel Count: 2 x ADAT channels
Output: 1 x TOSLINK connectors
Channel Assignments @ 44.1 KHz, 48 KHz: Port 1 = Channels 1 - 2
Channel Assignments @ 88.2 KHz, 96 KHz: SMUXI: Port 1 = Channels 1 - 2
Channel Assignments @ 176.4 KHz, 192 KHz: SMUXII: Port 1 = Channels 1 - 2
S/PDIF
Channel Count: 2 x S/PDIF channels
Output: 1 x RCA phono socket
World clock
Word Clock Input: 1 x BNC 75Ω port (Switchable Termination)
Word Clock Output: 1 x BNC 75Ω port
Opis nije dostupan
