Pozovite: +381 11 3347 442  
+
×

EIGHTEEN SOUND 15MB700

Šifra: 4879
Na stanju
19.440,00 rsd.
17.880,00 rsd.
Popust : 1.560,00 rsd.
Prikazana cena je za komad.
Količina
Opcija boje:

Very High Output MB Ferrite Driver 8 Ohm

103 dB SPL 1W / 1m average sensitivity
75 mm (3 in) Interleaved Sandwich Voice coil (ISV)
400 W AES power handling
Excellent transient response
Additional cone damping treatment
Improved heat dissipation via unique basket design
Suitable for compact two way, multiway and horn loaded midbass applications

The 15MB700 very high output mid-bass transducer shows exceptional efficiency and is primarily intended for 2-way very compact reflex systems (75 lt.), 3-way systems and horn loaded applications. It combines high sensitivity (103 dB 1W/1m) with a high power handling capability. The smooth textured curvilinear paper cone, in conjunction with the viscose dampened multiroll suspension, provides excellent cone dampening and excursion control. The 75 mm diameter aluminum voice coil features the same technology fitted to our top-of-the-range 4” voice-coil models. It employs Interleaved Sandwich Voice coil (ISV) technology, in which a high strength fiberglas former carries windings on both the outer and inner surfaces to achieve a mass balanced coil. This results in an extremely linear motor assembly with a reduced tendency for eccentric behavior when driven hard. The low coil inductance results in an improved transient response. Excellent heat dissipation has been achieved by incorporating air channels into the basket design, between the basket and the top plate. Maximum flux concentration and force factor in the gap are assured by the unique shape and design of the top and back plates which have been designed using our in-house Magnetic Flux FEA CAD resource. Due to the increasing use of audio systems at outdoor events, the ability to perform in adverse weather conditions or in high-humidity areas is a key feature of the 15MB700. This has been achieved using exclusive cone and magnetic plate treatment processes which allows the speaker to resist corrosion and render the cone water repellent.



GENERAL SPECIFICATIONS


Nominal Diameter
380 mm (15 in)


Rated Impedance
8 Ohm


AES Power
400 W


Program Power
600 W


Peak Power
1200 W


Sensitivity 
103 dB


Frequency Range 
45 ÷ 4300 Hz


Power Compression @-10dB 
0,6 dB


Power Compression @-3dB
2,0 dB


Power Compression @Full Power
3,3 dB


Max Recomm. Frequency
3000 Hz


Recomm. Enclosure Volume
75 ÷ 130 lt. (2,65 ÷ 4,6 cuft)


Minimum Impedance
5,9 Ohm at 25°C


Max Peak To Peak Excursion
23 mm (0,88 in)


Voice Coil Diameter
75 mm (2,95 in)


Voice Coil Winding Material
aluminum


Suspension
Multiroll, Polycotton


Cone
Curvilinear ribbed, Treated paper



 



THIELE SMALL PARAMETERS  


Fs
42 Hz


Re
5 Ohm


Sd
0,085 sq.mt. (131,75 sq.in.)


Qms
4,6


Qes
0,31


Qts
0,29


Vas
202 lt. (7,14 cuft)


Mms
73 gr. (0,16 lb)


BL
17,6 Tm


Linear Mathematical Xmax 
± 5,5 mm (± 0,22 in)


Le (1kHz)
1,2 mH


Ref. Efficiency 1W@1m (half space)
98,9 dB



 



MOUNTING INFORMATIONS


Overall diameter
387 mm (15,23 in)


N. of mounting holes
8


Mounting holes diameter
7,15 mm (0,28 in)


Bolt circle diameter
370 - 371 mm (14,55 - 14,6 in)


Front mount baffle cutout ø
353 mm (13,90 in)


Rear mount baffle cutout ø
357 mm (14,06 in)


Total depth
167,5 mm (6,59 in)


Flange and gasket thickness
19,5 mm (0,76 in)


Net weight
8,3 kg (18,3 lb)


Shipping weight
9,4 kg (20,75 lb)


CardBoard Packaging dimensions
405 x 405 x 214 mm (15,94 x 15,94 x 8,43 in)



FREQUENCY RESPONSE CURVE OF 15MB700 MADE ON 125 LIT. ENCLOSURE TUNED 50HZ IN FREE FIELD (4PI) ENVIRONMENT. ENCLOSURE CLOSES THE REAR OF THE DRIVER. THE THIN LINE REPRESENTS 45 DEG. OFF AXIS FREQUENCY RESPONSE

 
FREE AIR IMPEDANCE MAGNITUDE CURVE
Very High Output MB Ferrite Driver 8 Ohm
  • 103 dB SPL 1W / 1m average sensitivity
  • 75 mm (3 in) Interleaved Sandwich Voice coil (ISV)
  • 400 W AES power handling
  • Excellent transient response
  • Additional cone damping treatment
  • Improved heat dissipation via unique basket design
  • Suitable for compact two way, multiway and horn loaded midbass applications

The 15MB700 very high output mid-bass transducer shows exceptional efficiency and is primarily intended for 2-way very compact reflex systems (75 lt.), 3-way systems and horn loaded applications. It combines high sensitivity (103 dB 1W/1m) with a high power handling capability.
The smooth textured curvilinear paper cone, in conjunction with the viscose dampened multiroll suspension, provides excellent cone dampening and excursion control.
The 75 mm diameter aluminum voice coil features the same technology fitted to our top-of-the-range 4” voice-coil models. It employs Interleaved Sandwich Voice coil (ISV) technology, in which a high strength fiberglas former carries windings on both the outer and inner surfaces to achieve a mass balanced coil. This results in an extremely linear motor assembly with a reduced tendency for eccentric behavior when driven hard. The low coil inductance results in an improved transient response.
Excellent heat dissipation has been achieved by incorporating air channels into the basket design, between the basket and the top plate. Maximum flux concentration and force factor in the gap are assured by the unique shape and design of the top and back plates which have been designed using our in-house Magnetic Flux FEA CAD resource.
Due to the increasing use of audio systems at outdoor events, the ability to perform in adverse weather conditions or in high-humidity areas is a key feature of the 15MB700. This has been achieved using exclusive cone and magnetic plate treatment processes which allows the speaker to resist corrosion and render the cone water repellent.

GENERAL SPECIFICATIONS
Nominal Diameter 380 mm (15 in)
Rated Impedance 8 Ohm
AES Power 400 W
Program Power 600 W
Peak Power 1200 W
Sensitivity  103 dB
Frequency Range  45 ÷ 4300 Hz
Power Compression @-10dB  0,6 dB
Power Compression @-3dB 2,0 dB
Power Compression @Full Power 3,3 dB
Max Recomm. Frequency 3000 Hz
Recomm. Enclosure Volume 75 ÷ 130 lt. (2,65 ÷ 4,6 cuft)
Minimum Impedance 5,9 Ohm at 25°C
Max Peak To Peak Excursion 23 mm (0,88 in)
Voice Coil Diameter 75 mm (2,95 in)
Voice Coil Winding Material aluminum
Suspension Multiroll, Polycotton
Cone Curvilinear ribbed, Treated paper

 

THIELE SMALL PARAMETERS  
Fs 42 Hz
Re 5 Ohm
Sd 0,085 sq.mt. (131,75 sq.in.)
Qms 4,6
Qes 0,31
Qts 0,29
Vas 202 lt. (7,14 cuft)
Mms 73 gr. (0,16 lb)
BL 17,6 Tm
Linear Mathematical Xmax  ± 5,5 mm (± 0,22 in)
Le (1kHz) 1,2 mH
Ref. Efficiency 1W@1m (half space) 98,9 dB

 

MOUNTING INFORMATIONS
Overall diameter 387 mm (15,23 in)
N. of mounting holes 8
Mounting holes diameter 7,15 mm (0,28 in)
Bolt circle diameter 370 - 371 mm (14,55 - 14,6 in)
Front mount baffle cutout ø 353 mm (13,90 in)
Rear mount baffle cutout ø 357 mm (14,06 in)
Total depth 167,5 mm (6,59 in)
Flange and gasket thickness 19,5 mm (0,76 in)
Net weight 8,3 kg (18,3 lb)
Shipping weight 9,4 kg (20,75 lb)
CardBoard Packaging dimensions 405 x 405 x 214 mm (15,94 x 15,94 x 8,43 in)

 

 

FREE AIR IMPEDANCE MAGNITUDE CURVE

Ocena:

Vezani artikli


Srodni proizvodi

EIGHTEEN SOUND 15W700

16.680,00 rsd.
Dodaj u korpu

EMINENCE DELTA PRO 18A

21.120,00 rsd.
Dodaj u korpu

EMINENCE KAPPA 12A

16.680,00 rsd.
Dodaj u korpu

EMINENCE KAPPA PRO-10A

18.600,00 rsd.
Dodaj u korpu

EMINENCE KAPPA PRO-12A

16.680,00 rsd.
Dodaj u korpu