The Martin Wisman SRU 912 loudspeaker is a mid/high-frequency component of the SRU system. Nominal horizontal beam width is 60 degrees and nominal vertical beam width is 40 degrees.Tighter horizontal and vertical dispersion make this loudspeaker useful for delivering sound to mo...

18” Ferrite Chassis Driver

PASSIVE REINFORCEMENT SPEAKER - 400w / OHM 129dB SPL  For the VENTIS range, quality and flexibility are the watchwords. Based on a powerful combination of B&C compression drivers and FBT’s own custom, long excursion woofers, the 115, 112 and 110 models a...

The 15LW2400 has been developed as an evolution of the 15LW1401 low frequency transducer, setting a new industry standard in 15" (380 mm) ferrite high performance transducers. The speaker has been designed for use as a low bass or sub-woofer component in a compact cabinet (60 - 130 lt) reflex ...

6" Ceiling Speaker with ABS Back Cover, 3W-6W Hi-fi Ceiling Speaker● 5''/6''/8'' standard ceiling speaker● Hi-fi level sound quality ceiling speaker● Low impedance 8ohm output● Two way speaker system of fiber cone● Bass, mid and treble o...

Description The 12MB700 is a very high sensitivity (101.5 dB 1W/1m) midbass driver with high power handling capabilities. The 12MB700 can be used as either a bass/mid driver in compact 2-way reflex enclosures or as a direct radiating or horn loaded, dedicated midrange driver, in multi-way tour...

Pre-amplifier,8 in 8 out , MIC 1 has prior function , with chime functionCan connect 8 units amplifiers external.With 8 independent input and output channels without any interference. Each channel has independent volume control.MIC 1 has priority function and can select any channel ...

Strong black metal speaker grill.10” (25cm)

The APart BUZZSTOP-MKIII is a universal input adaptor that can be used for all connections and extensions. The input level selector allows you to convert any amplifier output to any line-level output, balanced or unbalanced. (E.g.: You can convert a 100V loudspeaker signal into a balanced or u...

The Apart MDS microphone discussion system is a highly flexible small to medium size tabletop discussion system. This easy to set up and to easy to use audio system is the perfect solution for meeting rooms, board rooms and medium conference rooms.

Crossover for 2-way systemCrossover Freq.:   4,5kHz Slope:   18dB/oct. Power RMS:   100W Connectors:   none

The 18LW2400 is an 18 inch extended low frequency loudspeaker designed for high SPL subwoofer applications in either a reflex, bandpass or horn loaded configuration. Compared to our industry standard 18LW1400, the 18LW2400 provides higher maximum SPL, increased program power handling and lower po...

HM25-GMetal compression driver hornUsually the words 'industrial' and 'clear-sound' are not compatible with each other, although Apart proves it can! The HM25-G is a very powerful full metal horn loudspeaker with compression driver. Even the inner horn part is made in aluminium, w...

The MPLT62-G is two-way long throw horn 100 volt high quality music projector. It has 62 watts rated power handling RMS at 100 volt and has transformer taps at 62 – 32 – 16 – 8 watts. Its long throw output performance brings quality sound over long distances and in wide areas with both musi...

White 5 “ build-in speaker for use in marine or very humid environmentsShape: round

CM6TSMF is a 6.5” ceiling speaker with an all metal speaker grille, back-can and mounting dog-ears. This loudspeaker has been designed with safety in mind for 100 Volt applications which resulted in a modern and very competitively priced ceiling speaker with a safety metal dome. ...

Extended LF Neodymium Transducer

Recessable reflex tube for speaker Diameter :  71,74mm